Sunnydaze Decor QX-4LR-4LRC User manual

4LR-C 04/2023
4-FOOT LOG RACK WITH COVER
QX-4LR-4LRC
Read assembly instructions carefully and follow the care instructions. Save this document for future reference.

Page 1 / 2
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
CHOKING HAZARD — This item contains small
parts that can be swallowed. Keep children and pets
away during assembly.
WARNING
WARNING:Manufacturer and seller expressly disclaim any and all liability from personal injury,
property damage or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment,

  
AEnd Panel 2
BRail 2
CBrace 2
DM8x75mm Bolt 8
ELock Nut 8
FWasher 12
GSpanner 2
HCover 1
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.

4LR-C 04/2023 Page 2 / 2
ASSEMBLY
Review all information and understand assembly before beginning.
• Place log rack on a hard, dry surface.
• Do not overload the log rack — holds approximately 1/2 face-cord of firewood.
• Ensure fittings are tight before use. Periodically check and tighten hardware as necessary.
• Protect the unit from outdoor elements with the included cover.
• Do not allow children to play with or around the log rack.
SAFETY STATEMENTS & WARNINGS

WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

1. Place two M8x75mm Bolts (D) through the
mounting holes on one side of Side Panel (A).
Then, slide one Washer (F) onto the bottom bolt,
and Brace (C) onto the top bolt.
2. Align Rail (B) with the bolts. Place one washer onto each
bolt. Hand-tighten one Lock Nut (E) onto each bolt.
3. Repeat this process until all components have been loosely attached.
4. Tighten all hardware using included Spanners (G).
TIP: To tighten the hardware more quickly, turn the spanner on the bolt head
clockwise while simultaneously turning the spanner on the lock nut counterclockwise.
Nylon
Insert IMPORTANT: Lock nuts must be installed with the nylon insert on the outside.
Tools are required to fully tighten lock nuts, failure to properly tighten the lock nuts may
result in product malfunction or personal injury.