Sunset Furniture Sunset Trading DLU-TLD-3448 User manual

SKU: DLU-TLD-3448
ASSEMBLY INSTRUCTIONS
List of Hardware For 1 Set
d
c
b
a
1
8
8
8
13.8
Flat Washer
Spring Washer
Spanner
Hex.Com.Bolt
List of Parts For 1 Set
Table Top
Table Leg
01 1
4
1Turn the under side of the Table Top over
and place it on a clean and smooth surface
such as rug or carpet to avoid the Table Top from
being scratched .
2Fix the turned Leg to the corner of the apron with
the Flat Washer,Spring Washer And Hex Nut
using the Spanner to tighten it.
3Repeat the same step for the other three Legs .
MADE IN MALAYSIA
02
01
Apron
02
a
b
c
d
12.8
01
01
4Pull out for extension .
Push in
Pull out
IMPORTANT NOTES:
Thank you for purchasing this quality
product! It has been engineered for easy
assembly yet constructed for durability.
Please take the time to read and follow
the instructions while assembling.
701 E Industrial Pk Dr
Manchester, NH 03109
sunsettrading.com
Please Contact us if you are
Missing Parts or have any Questions
877-364-8464
[email protected]
• Keep all hardware and small parts
out of reach of children.
• Remove all staples and packing
straps before you start to assemble.
• Do not discard main cartons and
wrapping material until assembly is
complete.
• Check to be sure you have all parts
and hardware.
• Place all wooden parts on a clean
soft surface to avoid parts from
being scratched.
• Do not tighten all screws / bolts until
completely assembled.
• Check tightness 3x's/year, with use
screws can become loose.
• Do not attempt to repair or modify
parts that are broken or defective.
Please contact us immediately.
• Enjoy your new furniture!

ASSEMBLY INSTRUCTIONS
List of Parts For 1 Set
SKU: DLU-C50-RTA
IMPORTANT NOTES:
Step 1
Step 2
f
d
e
c
d
a
e
01
02
10
Flat Washer
1
4" x 18mm
01
List of Hardware For 1 Set
b
a
Chair Back 1
Front Leg (R) 1
10
Spring Washer
1
4"
e
f1
Code Figure Part Qty.
Code Figure Hardware Qty.
Spanner
10mm
c
d
4
Hex. Bolt
M6 x 80mm
4
Hex. Bolt
M6 x 60mm
2
Hex. Bolt
M6 x 40mm
02
03
Seat Frame 1
Front Leg (L) 1
04
01
01
02
05
03
05
02
g
g
04
01
b
03
e
f
d
PHRS Screw
#8 x 1 1 4"4
g
05 Side Stretcher 2
02
04
g
g
g
g
Thank you for purchasing this quality product!
It has been engineered for easy assembly yet
constructed for durability.
Please take the time to read and follow
the instructions while assembling.
701 E Industrial Pk Dr
Manchester, NH 03109
sunsettrading.com
Please Contact us if you are
Missing Parts or have any Questions
877-364-8464
[email protected]
• Keep all hardware and small
parts out of reach of children.
• Remove all staples and
packing straps before you start
to assemble.
• Do not discard main cartons
and wrapping material until
assembly is complete.
• Check to be sure you have all
parts and hardware.
• Place all wooden parts on a
clean soft surface to avoid
parts from being scratched
• Do not tighten all screws / bolts
until completely assembled.
• Check tightness 3x's/year, with
use screws can become loose.
• Do not attempt to repair or
modify parts that are broken or
defective. Please contact us
immediately.
• Enjoy your new furniture!
MADE IN MALAYSIA