SunStar SPS/E-8050 Series SPS/HT-5050B1 Series User manual

1) FOR AT MOST USE WITH EASINESS,
PLEASE CERTAINLY READ THIS MANUAL
BEFORE STARTING USE.
2) KEEP THIS MANUAL IN SAFE PLACE
FOR REFERENCE WHEN THE MACHINE
BREAKS DOWN.
MMEEEE--111100331111
USER’’ S MANUAL
SPS/E-5050,8050 Series
SPS/HT-5050B1,8050B1 Series
Large pattern sewing machine
parameter setting manual
R
SSuunnSSttaarr CCOO..,, LLTTDD..

Best Quality
Best Price
Best Service
SSuunnSSttaarr CCOO..,, LLTTDD..
R
1. Thank you for purchasing our product. Based on the rich expertise and
experience accumulated in industrial sewing machine production, SUNSTAR
will manufacture industrial sewing machines, which deliver more diverse
functions, high performance, powerful operation, enhanced durability, and
more sophisticated design to meet a number of user’s needs.
2. Please read this user’s manual thoroughly before using the machine. Make
sure to properly use the machine to enjoy its full performance.
3. The specifications of the machine are subject to change, aimed to enhance
product performance, without prior notice.
4.
This product is designed, manufactured, and sold as an industrial sewing
machine. It should not be used for other than industrial purpose.

CONTENTS
1. DESCRIPTION ON PARAMETER RELATED TO GENERAL SEWING OPERATION
………………5
1) Function No. Related to Pattern Programming …………………………………………… 58
2) Pattern chart ………………………………………………………………………………… 60
3) Parameter Number Related to General sewing ……………………………………………… 62
4) Error List …………………………………………………………………………………… 67
2. Maintenance ………………………………………………………………………………………………………………………………………………………………69
1) Alarm and Warning List …………………………………………………………………… 69

5
11
DESCRIPTION ON PARAMETER RELATED TO
GENERAL SEWING OPERATION
※ The shadow area indicates factory-installed condition.
Function No. : 000 Function Name : Manual Operation En/Dis


 

 










 

 

- Large patterns (SPS/E-5050, 8050)

6
Function No. : 001 Function Name : Moving to start position/the 2nd origin by manual drive



 


 









 


 





 




 

7
Function No. : 002 Function Name : Return to the machine origin after finishing sewing operation
Function No. : 003 Function Name : Return to the origin when limit error occurs





 








 



              




 



 






 


 
  





8
Function No. : 004 Function Name : Return mode to the sewing start position
  
    

 




 



 







 




 




            

           









7
Function No. : 005 Function Name : Counting method for bobbin count
Function No. : 006 Function Name : Use of products counter


 






 





 


 








 

 





 



8
Function No. : 007 Function Name : Time for reading patterns
Function No. : 008 Function Name : Trimming during emergency stop



 









 





 



  






 






9
Function No. : 009 Function Name : Acceleration characteristics of main-shaft speed


 












































































[ Acceleration characteristics of sewing speed ]











































 

 




10
Function No. : 010 1st Needle Speed Setting
Function No. : 011 2nd Needle Speed Setting
Function No. : 012 3rd Needle Speed Setting
User sets the speed for the 3rd needle.
User sets the speed for the 3rd needle (default value: 4[100ms])
 





User sets the speed for the 2nd needle.
User sets the speed for the 2nd needle (default value: 2[100ms])
 





User sets the speed for the 1st needle.
User sets the speed for the 1st needle (default value: 2[100ms])
 





Function No. : 013 4th Needle Speed Setting
User sets the speed for the 4th needle.
User sets the speed for the 4th needle (default value: 6[100ms])
 






11
Function No. : 014 5th Needle Speed Setting
Function No. : 015 6th Needle Speed Setting
Function No. : 016 7th Needle Speed Setting
User sets the speed for the 7th needle.
User sets the speed for the 7th needle (default value: 12[100ms])
 





User sets the speed for the 6th needle.
User sets the speed for the 6th needle (default value: 10[100ms])
 





User sets the speed for the 5th needle.
User sets the speed for the 5th needle (default value: 8[100ms])
 





Function No. : 017 8th Needle Speed Setting
User sets the speed for the 8th needle.
User sets the speed for the 8th needle (default value: 14[100ms])
 






12
Function No. : 018 9th Needle Speed Setting
Function No. : 019 10th Needle Speed Setting
User sets the speed for the 10th needle.
User sets the speed for the 10th needle (default value: 18[100ms])
 





User sets the speed for the 9th needle.
User sets the speed for the 9th needle (default value: 16[100ms])
 






13
Function No. : 020 Function Name : Maximum speed limit of sewing





 




















14
Function No. : 021 Function Name : Opening angle of feed plate transfer



󰿽
󰿽



 


󰿽

 











󰿽
󰿽















󰿽 󰿽 󰿽 󰿽

15
Function No. : 022 Function Name : Operation condition of feed plate when sewing operation finishes


 




 









 






 




 







 





16
Function No. : 023 Function Name : Descent maintenance of upper feed plate













 

 


Function No. : 024 Function Name : Signal mode of Pedal 1



 




 







 


 




17
Function No. : 025 Function Name : Signal mode of pedal 2



 


 







 


 


Function No. : 026 Function Name : Setup for presser foot operation


 






 


 



 



18
Function No. : 027 Function Name : Setup for descent time of presser foot

 



 





 


Function No. : 028 Function Name : Setup for wiper operation


 






 
 


 
 
