Sunwebcam Solar 4G Camera User manual

Sunwebcam Solar 4G Camera
User Manual

TABLE OF CONTENTS
1. Package List................................................................................................................................................................. 1
2. The introduction of camera's whole structure...........................................................................................................2
2.1 The structure of the Camera.............................................................................................................................2
3. Notice.......................................................................................................................................................................... 3
4. User Guide for Smart Phone App................................................................................................................................4
4.1. Download and register.....................................................................................................................................4
4.1.1. Download the app................................................................................................................................ 4
4.1.2. register.................................................................................................................................................. 4
4.1.3. Add and manage...................................................................................................................................4
4.2. Wi-Fi camera.................................................................................................................................................... 4
4.2.1. Connect the Wi-Fi of cameras.............................................................................................................. 4
4.2.2. Local Camera.........................................................................................................................................5
4.2.3. Set the camera to connect to the router..............................................................................................5
4.2.4. Add camera to account.........................................................................................................................6
4.3. 4G camera........................................................................................................................................................ 7
4.3.1. 3G/4G Parameters setting.................................................................................................................... 7
4.4. Ethernet camera.............................................................................................................................................. 8
4.5. List of cameras and Operation.........................................................................................................................8
4.5.1. Interface................................................................................................................................................8
4.5.2. RTMP push flow Settings...................................................................................................................... 9
4.5.3. Add RF devices....................................................................................................................................10
4.5.4. SD / Cloud Record............................................................................................................................... 10
4.5.5. Locate Camera.................................................................................................................................... 11
5. User Guide for PC Client............................................................................................................................................11
5.1. Preparations required before installation..................................................................................................... 11
5.2. Detailed introductions for installation process............................................................................................. 11
5.2.1. Installation process preview...............................................................................................................11
5.2.2. Detailed introductions for basic installation process.........................................................................11
5.3. Installation of RFID accessories (optional).................................................................................................... 16
5.4. Camera advanced parameter setting............................................................................................................ 16
5.4.1. The parameter settings for 3G, 4G version........................................................................................ 16
5.4.2. Audio and video parameters settings.................................................................................................17
5.4.3. Video recording parameters settings................................................................................................. 18
5.4.4. Motion Zone....................................................................................................................................... 19
5.4.5. FTP recording (support TI program)................................................................................................... 19
5.4.6. Cloud Storage Settings........................................................................................................................21
5.4.7. Other important settings, including RS485 baud rate and IR lighting control mode........................ 21
5.4.8. System Information.............................................................................................................................22
6. Advanced function introduction of 51 See PC clients.............................................................................................. 23
6.1. Advanced setting............................................................................................................................................23
6.2. Browsing cloud video.....................................................................................................................................23
6.3. Alarming PUSH Notification and remote SD card video recording linkage...................................................25
7. How to set up the product........................................................................................................................................25
7.1. Assembly of solar panel.................................................................................................................................25

TABLE OF CONTENTS
7.2. How to assemble camera...............................................................................................................................27
7.3. Mount the solar panel or camera on the pole.............................................................................................. 28
7.4. Mount the solar panel or camera on the wall...............................................................................................30

1
1. Package List
Solar Panel x1
4G Camera x1
Bracket x2
Holder for Pole x2
Holder for angle x2
Stainless Ribbon x6
U Ring (89mm) x2
U Ring (140mm) x2
Accessories (screws, washers, nuts...)

2
Battery set is built inside. Protective foam is for transportation, please remove it before use.
2. The introduction of camera's whole structure
2.1 The structure of the Camera
Front
cam
IR light
Light

3
Back
install the antenna as the picture shown, the wifi antenna is on the left, the 4G antenna is on the right, they are
made of different material, please don't replace each other! you mast install them in a right way!
3. Notice
1) The internal structure
The Micro SD Card is inside, the SIM Card is outside.
2) The SIM Card's short side must be upwards, otherwise you will destroy the card slot. Direction is as the picture
shown：
Wi-Fi antenna
4G antenna
Micro SD
SIM Card

4
3) The TF card's long side must be upwards, otherwise you will destroy the card slot. Direction is as the picture
shown：
4. User Guide for Smart Phone App
4.1.Download and register
4.1.1. Download the app
You can search 4GCMS on Google Play to download the app!
You can search 4GCMS on App Store to download the app!
4.1.2. register
When you login successfully, you can click the button named ‘register’, you should put your account number and
password in the blank, after that you should click the button named ‘register’, if you register successfully, the app
will show you login!
4.1.3. Add and manage
4GCMS have many ways to add the camera. 4GCMS camera can use the Wi-Fi, 4G and Ethernet to connect the
internet. Here are three ways to add the camera to the account.
4.2.Wi-Fi camera
4.2.1. Connect the Wi-Fi of cameras
When the camera start, it will launch a Wi-Fi, named by c8 starting. You should connect this Wi-Fi, password is
12345678.

5
4.2.2. Local Camera
Open the 4GCMS app, click the local device, you will see the camera after you drop down to refresh the list.
4.2.3. Set the camera to connect to the router
Set the camera connect the Wi-Fi. Click the button , you can see the device information, click the setting
button, choose the wireless Network Parameters, open the Wi-Fi client. SSID is the Wi-Fi name which one you
want to connect, then you should input the password, click the save button（click you will see the Wi-Fi list,
choose the Wi-Fi you want to connect）.

6
4.2.4. Add camera to account
When you set Wi-Fi successfully, the Wi-Fi of camera will disappear, you should exit the app, open the Wi-Fi
setting interface, connect the Wi-Fi which the camera connect, then you open the app, login to your account,
choose ‘add devices by ID’, select the camera you want to bind, click button next (need about two or three
minutes camera can be seen in the list, please be patient), Do not operate cell phone at this moment, until the
camera add successfully.back to sliding menu, click “Remote device”, refresh the list, you can see the camera you
add.If the camera has not appear in the list, the Wi-Fi setting is failed, you should long press the reset button
which behind the camera,5 second, then you should set again.

7
4.3.4G camera
Insert the card correctly, power on the camera, （about 3 minute, please wait）, then click ‘add camera’, choose
‘add devices by ID’, input the camera’s ID, click button next, Do not operate cell phone at this moment, until the
camera add successfully. Back to sliding menu, click ‘Remote device’, refresh the list, you can see the camera you
add.
4.3.1. 3G/4G Parameters setting
http://wiki.apnchanger.org/Main_Page
ISP
APN
Dial
Number
account
password
Germany
vodafone
web.vodafone.de
*99#
vodafone
vodafone
Bulgaria
VIVACOM
internet.vivacom.
bg
*99#
VIVACOM
VIVACOM

8
4.4.Ethernet camera
Plug in cable, After waiting for the camera in full swing, （about 1 minute, please wait）, you should find the
camera in local device list, click , click ‘setting’, click ‘wired Network Parameters’, open the DHCP or input right
IP, finally click save button , then click ‘add camera’, choose ‘add devices by ID’, select the camera you want to bind,
click button next. Do not operate cell phone at this moment, until the camera add successfully. back to sliding
menu, click ‘Remote device’, refresh the list, you can see the camera you add.
If the add failed, the camera can’t connect the internet, you should reset the camera and try again!
4.5.List of cameras and Operation
4.5.1. Interface
When you login successfully ,you will see the management interface of device , as shown in picture ：
click the button , you will enter the device Info interface, you can delete device, modify the name of device,
update the location, search the parameter and settings there. Click the device's thumbnail or device name, you
Sliding menu
Camera online
Camera offline
Device List
Device Info
Map

9
will enter the vision interface, you can view video in real time on the web. Screen direction switches automatically.
Vertical screen mode
Horizontal screen mode
4.5.2. RTMP push flow Settings
There are two ways, one is through the alarm and video settings, open RTMP, but only supports a short address
within 123 bytes. Following figure
Another way to set up: direct RTMP settings, Following figure.

10
4.5.3. Add RF devices
click the button , choose RF Devices, then add the IDs.
4.5.4. SD / Cloud Record
Click ‘SD Record’ or ‘Cloud Record’, you can find alarm record divided in different hours. Click magnifying glass icon
on top right corner, you can select record in different date (red icon means there is record on that date).

11
4.5.5. Locate Camera
Click ‘Locate’ on top right corner, you can update mobile’s location to camera. Then you can find cameras on map,
and you can check the camera directly.
5. User Guide for PC Client
5.1.Preparations required before installation
Accessing to the Internet is necessary to use the product, otherwise only PC local videos are available.
You must register for an account to use the product. Note that the computer or mobile phone must have
accessed to the Internet, otherwise the registration will be unsuccessful.
5.2.Detailed introductions for installation process
5.2.1. Installation process preview
1) Connect the CAM and the router with the network cable.
2) Register for an account.
3) Search the camera.
4) Set the network parameters and bind the camera to account.
5) Watch the video.
6) Install the RFID accessories (optional).
5.2.2. Detailed introductions for basic installation process
The detailed introductions of installation process are shown as follows through the example of PC clients.
Step 1: Connect the CAM and the router with the network cable

12
WIFI Router
Wire
d
WIFI or wire
PC
ADSL
Internet
CAM
1. Plug in the power adapter.
2. Connect the CAM and the router with the network cable as shown above. Note that PC and the camera need to
be in the same router.
Step 2: Set the 51See CAM process
Run 51SEE cloud system setup.exe. Noting: You must click to provide your permission when the firewall software
prompts the software need the access to the network.
1) Initial interface of 51SEE cloud monitoring system
2) Click the button of ‘Register’.

13
3) Fill out the registration information, and click ‘OK’.
4) After log in, click the ‘local device’ with right mouse button, click ‘local search’ or click the fourth button ‘device
scan’ on the upper right.
5) After searching the camera, double click it or click the ‘Edit’ button.

14
6) Set the IP address and click ‘apply’
Note: The parameter settings of Wi-Fi version
Select Wi-Fi items in the settings interface, input the SSID and password, and then click ‘apply’.
If you want to use WPS to set Wi-Fi, press and hold the Reset button for more than 4 seconds, release within 10
seconds, press the router's WPS button after the camera system indicator light flashing and the camera will
automatically connect to the router within about 3 to 5 minutes.

15
Note: If the camera fails to bind, please restore factory settings for resetting.
Step 3: Watch the video
Once the installation process is completed, the user can watch videos through PC or mobile phone.

16
You can watch video whenever and wherever with a computer or mobile phone as long as you log in the account
through the clients.
For the PC client, the function is more powerful. You should pay attention to the following two points
1. Local device can be watched only when CAM and computer are in the same LAN, and high-definition video are
also available to watch.
2. Remote device can be watched wherever.
Above is the installation instructions through the example of PC client. Installation settings can also be conducted
for iPhone and Android client.
5.3.Installation of RFID accessories (optional)
1) The camera can accept any RFID accessories installation by the code. The code will be invalid after half an hour.
2) After the code matching, please conduct RFID settings through PC client to change the name of the RFID so that
you will know which alarms when the alarms occur. Please refer to Section 4.8 ‘RFID Accessory Settings’.
3) When the RFID codes successfully match, the camera system indicator will quickly flash for 4 seconds.
4) The SOS buttons of remote control in the RFID accessories have the function of highest level. The fortification
will automatically start after press, and it will trigger the alarm.
5) For 3G, 4G equipment with RFID, you can set the phone number for alarm.
5.4.Camera advanced parameter setting
5.4.1. The parameter settings for 3G, 4G version

17
In the setting interface, 3G options will automatically appear for the IP camera of 3G, 4G version. Input the
operator's dialing parameters, and click on the application to adapt local operators.
You can refer to the following link for foreign operators:
http://wiki.apnchanger.org/Main_Page The default dialing number is mostly * 99 #. You need to specifically check
the local operators. The common operators are as follows:
Note: The 3G, 4G machines support alarm dialing function, but they must be used in conjunction with the wireless
alarm.
5.4.2. Audio and video parameters settings
ISP
APN
Dial number
User
Password
German vodafone
web.vodafone.de
*99#
vodafone
vodafone
Bulgaria VIVACOM
internet.vivacom.bg
*99#
VIVACOM
VIVACOM