Sunwood MARINO Instruction sheet

Operation and installation manual
Návod k obsluze a instalaci
SUNWOOD MARINO PROPANE
ENGLISH & CZECH
HOW
TO
INSTALL
YOUR
HOT
BUDDY

2
0063CM3866
CERTIFIED BY KIWA
MANUFACTURER Sunwood® Dutch Design
Christiaan Huygensstraat 10
2665 KX Bleiswijk
The Netherlands
CONTACT DETAILS [e-mail]
[phone]
www.sunwood.eu
SUNWOOD MARINO
PRODUCT SPECIFICATIONS
Model
Version
PIN
Cat.
Type of gas
p, in mbar
Qn, in kW (Hs)
g/hr
Marino
Butane/Propane
0063CM3866
I3B/P-30
G30
30
5,7
412
KEEP THE INSTRUCTIONS
FOR FUTURE REFERENCE
GAS CONNECTION
This appliance requires an EN16436 certified flexible gas hose (from 40 to 50cm) and an
EN16129 certified pressure regulator (of 30mbar), which comply with the regulations in
force. Please consult your gas cylinder supplier for this.
WARNING: This appliance must be used, and the gas cylinder stored, in
accordance with the regulations in force.

3
Installation instructions
Assembling the appliance
Allowed types of gas cylinders
Connecting the gas cylinder
Operation instructions
Operation with gas control valve
4
4
4
5
6
6
TABLE OF CONTENTS
1
1.1
1.2
1.3
2
2.1
WHAT'S IN THE BOX?
1x
1x
1x
2x
2x
4x
Marino frame, burner + gas control
valve
Marino top
Bag of lava rocks
Castor wheels (without brake)
Castor wheels (with brake)
Spring washers
EXPLANATION OF SYMBOLS
Turning on
Adjusting the flames
Turning off
Warranty
Maintenance
Warnings
6
6
6
8
9
10
2.2
2.3
2.4
3
4
5
4x
4x
4x
2x
1x
1x
1x
Nuts
Washers
Bolts
Screws
Adapter
Wrench
Allen key
WARNING: Chance of injury, damage, fire. Very important information.
TIP: Useful information.

4
1.2 ALLOWED TYPES OF GAS CYLINDERS
• Maximum allowed filling of the gas cylinder is 11kg.
• Maximum allowed width and height of the gas cylinder is 30cm x 58cm.
1. INSTALLATION INSTRUCTIONS
1. Attach the wheels. The correct assembly
order seen from below is: bolt - wheel -
Marino - washer - spring washer - nut. Use
the included wrench to tighten.
2. Spread the lava rocks evenly over the
burner's surface. Beware that no rock dust
gets into the burner.
3. Assemble the top of the Marino with the
supplied screws and a Philips Screwdriver
(not included).
1.1 ASSEMBLING THE APPLIANCE
1
2
3
3
2
1
1
2
3
WARNING: Use only the type of gas and type of gas cylinder specified in
this manual.
WARNING: Read the instructions before use.
WARNING: The minimum distance between the appliance and
combustible materials has to be 1,5 meters.
TIP: Always buy a sealed gas cylinder. Beware that the seal is not broken
with purchase, this ensures the gas cylinder has been checked and is safe.

5
1.3 CONNECTING THE GAS CYLINDER
This appliance requires an EN16436 certified flexible hose (from 40 to 50cm) and an
EN16129 certified pressure regulator (of 30mbar).
Consult the instructions of the pressure regulator to connect the gas cylinder.
THREADED CONNECTION 1/4" LH
OTHER CONNECTIONS:
Use the supplied adapter.
WARNING: Only change the gas cylinder in an amply ventilated area and
away from candles, cigarettes, and other ignition sources.
WARNING: Always check that the regulator seal (rubber O-ring) is cor-
rectly fitted and undamaged. If this is not the case it shall be exchanged
for a new regulator seal and the appliance shall not be used.
WARNING: Check the flexible hose at least once per month and each
time the gas cylinder is changed. If the hose shows signs of cracking,
splitting or other deterioration it shall be exchanged for a new hose of the
same length and of the equivalent quality.
WARNING: Do not connect the gas cylinder directly to the appliance
without regulator.