Super Relax 2 User manual

Chair Installation
Created on October, 2021

Attach metal frame from inside chair
box to spa base as shown Line up
holes and attach with 4 screws.
1
2
Align back of the chair to install as
shown ( 2 people needed).

Once aligned clip underneath and
back should be attached.
Chair should now look like this once
back is installed.
3
4

Attach the arms one at a time to
frame on base as shown - front first.
Attach back end of the arm to the
frame base.
5
6

Slide arm all the way to the back
Attach screw to allen key as shown
7
8

This screw from Pic 8 has to be
mounted to the chair frame via the
circular hole in the base to get to
that hole, place arm with screw and
allen key, through the hole in the
back of the base and put the screw
through the circular hole to attach to
the frame.
Shows the screw being attached to
the frame via a circular hole.
9
10

Push armrest to the regular posi-
tion.
Repeat the same process on the
other side to install the other arm-
rest.
11
12

Attach bottom seat board to the
seat frame.
Align up correctly.
13
14

Air tube emerging from seat base
have to go through the hole in seat
board when attaching the cushioned
seat to the base.
Attach zipper from cushioned seat
to back of the chair.
15
16

Make sure the seat is aligned prop-
erly with the back as shown.
17
18

21/A Attach Brown Hose to Brown
Hose
(Left connection to “T” Hose)
21/A
21/B
21/B Attach Brown Hose to Brown
Hose
(Right connection to “T” Hose)
Cable Connections
22
22 Attach Green Cable to Green
Cable

23 Attach White connect electric
jack to another White electric jack
23
24
25
26
24 Attach White Hose to another
White Hose.
25 Attach Black connect electric
jack to another Black electric jack
26 Attach Black connect electric
jack to another White electric jack
Cable Connections

27 Attach connect electric Power to
another Power Cable.
27
28 connect electric Power Cable to
wall outlet.
28
Cable Connections

Unit is READY for USE.