Super X7SPA-L User manual

X7SPA-L
USER’S MANUAL
Revision 1.1b
X7SPA-H
X7SPA-HF
X7SPE-HF
X7SPE-H

Manual Revision 1.1b
Release Date: July 13, 2010
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document. Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their
respective companies or mark holders.
Copyright © 2010 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
manufacturer’s instruction manual, may cause interference with radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, you are encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/television technician for help.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.

Preface
About This Manual
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use of the
X7SPA-L/X7SPA-H/X7SPA-HF/X7SPE-H/X7SPE-HF motherboard.
About This Motherboard
The X7SPA-L comes integrated with the single-core Intel® ATOMTM D410 (1.66GHz,
11.6W) processor while the X7SPA-H/X7SPA-HF/X7SPE-H/X7SPE-HF features the
Intel ATOM D510 (Dual Core, 1.66GHz, 14.6W) processor. With memory support
for up to 4 GB of non-ECC, unbuffered 667 MHz DDR2 SO-DIMMs in 2 sockets, 6
SATA ports, on-board VGA, and up to 10 USB 2.0 ports, the X7SPA-L/X7SPA-H/
X7SPA-HF/X7SPE-H/X7SPE-HF delivers cost-effective performance in a small
form factor.
This product is intended to be professionally installed and serviced by a techni-
cian.
Manual Organization
Chapter 1 describes the features, specications and performance of the mainboard
and provides detailed information about the chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules and other hardware components into the
system. If you encounter any problems, see Chapter 3, which describes trouble-
shooting procedures for video, memory and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS and provides detailed information
on running the CMOS Setup utility.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists Driver Installation Instructions.
Preface
iii

X7SPA-L/X7SPA-H/X7SPA-HF/X7SPE-H/X7SPE-HF User’s Manual
Conventions Used in the Manual:
Special attention should be given to the following symbols for proper installation and
to prevent damage done to the components or injury to yourself:
Danger/Caution: Instructions to be strictly followed to prevent catastrophic
system failure or to avoid bodily injury
Warning: Critical information to prevent damage to the components or
data loss.
Important: Important information given to ensure proper system installa-
tion or to relay safety precautions.
Note: Additional Information given to differentiate various models or pro-
vides information for correct system setup.
iv

Contacting Supermicro
v
Contacting Supermicro
Headquarters
Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: [phone]
Fax: [phone]
Email: [email protected] (General Information)
[email protected] (Technical Support)
Web Site: www.supermicro.com
Europe
Address: Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
's-Hertogenbosch, The Netherlands
Tel: [phone]
Fax: [phone]
Email: [email protected] (General Information)
[email protected] (Technical Support)
[email protected] (Customer Support)
Asia-Pacic
Address: Super Micro Computer, Inc.
4F, No. 232-1, Liancheng Rd.
Chung-Ho 235, Taipei County
Taiwan, R.O.C.
Tel: [phone]
Fax: [phone]
Web Site: www.supermicro.com.tw
Technical Support:
Email: [email protected]
Tel: [phone], ext.132 or 139

vi
X7SPA-L/X7SPA-H/X7SPA-HF/X7SPE-H/X7SPE-HF User’s Manual
Table of Contents
Preface
About This Manual ........................................................................................................ 3
About This Motherboard................................................................................................ 3
Manual Organization ..................................................................................................... 3
Conventions Used in the Manual:................................................................................. 4
Contacting Supermicro.................................................................................................. 5
Chapter 1 Introduction
1-1 Overview ......................................................................................................... 1-1
Checklist.......................................................................................................... 1-1
X7SPA-L Image ........................................................................... 1-2
X7SPA-H Image .......................................................................... 1-3
X7SPA-HF Image ........................................................................ 1-4
X7SPE-H Image .......................................................................... 1-5
X7SPE-HF Image ........................................................................ 1-6
Motherboard Layout (X7SPA-L/X7SPA-H/X7SPA-HF).................................... 1-7
Motherboard Layout (X7SPE-H/X7SPE-HF)................................................... 1-8
X7SPA-L/X7SPA-H/X7SPA-HF Quick Reference ........................................... 1-9
X7SPE-H/X7SPE-HF Quick Reference ........................................................ 1-10
Motherboard Features ................................................................................. 1-14
X7SPA/X7SPE Series Block Diagram .......................................................... 1-16
1-2 Chipset Overview ......................................................................................... 1-17
I/O Controller Hub: ICH9R (X7SPA-H/X7SPA-HF/X7SPE-H/X7SPE-HF) .... 1-17
I/O Controller Hub: ICH9 (X7SPA-L)............................................................. 1-17
1-3 PC Health Monitoring.................................................................................... 1-18
Recovery from AC Power Loss..................................................................... 1-18
Onboard Voltage Monitoring ........................................................................ 1-18
Fan Status Monitor with Software................................................................. 1-18
CPU Overheat LED and Control .................................................................. 1-18
1-4 Power Conguration Settings........................................................................ 1-19
Slow Blinking LED for Suspend-State Indicator ........................................... 1-19
BIOS Support for USB Keyboard.................................................................. 1-19
Main Switch Override Mechanism ................................................................ 1-19
1-5 Power Supply ................................................................................................ 1-19
1-6 Super I/O....................................................................................................... 1-20
1-7 Overview of the Nuvoton BMC Controller (X7SPA-HF/X7SPE-HF only) ..... 1-20
1-8 LVDS (X7SPA-L only).................................................................................... 1-21

vii
Table of Contents
Chapter 2 Installation
2-1 Static-Sensitive Devices.................................................................................. 2-1
Precautions ..................................................................................................... 2-1
Unpacking ....................................................................................................... 2-1
Tools Needed .................................................................................................. 2-2
Location of Mounting Holes ............................................................................ 2-2
2-2 Motherboard Installation.................................................................................. 2-2
Installation Instructions.................................................................................... 2-3
2-3 System Memory .............................................................................................. 2-4
How to Install SO DIMMs ............................................................................... 2-4
Memory Support.............................................................................................. 2-4
The SO DIMM Socket..................................................................................... 2-5
2-4 Connectors/I/O Ports....................................................................................... 2-6
Back Panel Connectors and I/O Ports............................................................ 2-6
ATX PS/2 Keyboard and PS/2 Mouse Ports.............................................. 2-7
Universal Serial Bus (USB)........................................................................ 2-8
Serial Ports................................................................................................. 2-9
VGA Connector ........................................................................................ 2-10
LAN Ports / IPMI .......................................................................................2-11
Front Control Panel....................................................................................... 2-12
JF1 Header Pins ...................................................................................... 2-12
Front Control Panel Pin Denitions............................................................... 2-13
Power LED .............................................................................................. 2-13
HDD LED.................................................................................................. 2-13
NIC1/NIC2 LED Indicators ....................................................................... 2-13
Overheat (OH)/Fan Fail LED.................................................................... 2-14
Power Fail LED ........................................................................................ 2-14
Reset Button ........................................................................................... 2-15
Power Button ........................................................................................... 2-15
NMI Button .............................................................................................. 2-15
2-5 Connecting Cables........................................................................................ 2-16
ATX Main PWR & CPU PWR Connectors .............................................. 2-16
External Power Connector ...................................................................... 2-16
Fan Headers............................................................................................. 2-17
Overheat/Fan Fail LED (JOH).................................................................. 2-18
Front Panel Audio Header........................................................................ 2-18
Chassis Intrusion ..................................................................................... 2-19
SATA DOM Power .................................................................................... 2-19

X7SPA-L/X7SPA-H/X7SPA-HF/X7SPE-H/X7SPE-HF User’s Manual
viii
Power SMB I2C Connector ...................................................................... 2-19
CD Header .............................................................................................. 2-20
SMB.......................................................................................................... 2-20
T-SGPIO 0/1 Headers .............................................................................. 2-20
LVDS Connector....................................................................................... 2-21
Inverter Power Connector ........................................................................ 2-21
2-6 Jumper Settings ............................................................................................ 2-22
Explanation of Jumpers............................................................................ 2-22
LAN Port Enable/Disable ......................................................................... 2-23
SMB (I2C) Bus to PCI Slots...................................................................... 2-23
CMOS Clear ............................................................................................. 2-24
USB Wake-Up ......................................................................................... 2-25
TPM Support Enable................................................................................ 2-26
Watch Dog Enable/Disable ...................................................................... 2-26
COM3 Redirection Select......................................................................... 2-26
Power LED/Speaker................................................................................. 2-27
BMC (X7SPA-HF/X7SPE-HF Only) ........................................................ 2-27
VGA Enable (X7SPA-HF/X7SPE-HF only)............................................... 2-28
HDA/AC97 Select .................................................................................... 2-28
Power Force On Enable/Disable.............................................................. 2-29
DCD / P5V Select .................................................................................. 2-29
2-7 Onboard Indicators........................................................................................ 2-30
LAN Port LEDs......................................................................................... 2-30
2-8 Serial ATA and HDD Connections................................................................. 2-31
SATA Connectors ..................................................................................... 2-31
Chapter 3 Troubleshooting
3-1 Troubleshooting Procedures ........................................................................... 3-1
Before Power On ............................................................................................ 3-1
No Power ........................................................................................................ 3-1
No Video ......................................................................................................... 3-1
Memory Errors ............................................................................................... 3-2
Losing the System’s Setup Conguration....................................................... 3-2
3-2 Technical Support Procedures ........................................................................ 3-2
3-3 Frequently Asked Questions ........................................................................... 3-3
3-4 Returning Merchandise for Service................................................................. 3-5
Chapter 4 BIOS
4-1 Introduction...................................................................................................... 4-1
Starting BIOS Setup Utility.............................................................................. 4-1

How To Change the Conguration Data ......................................................... 4-1
How to Start the Setup Utility ......................................................................... 4-2
4-2 Main Setup ...................................................................................................... 4-2
4-3 Advanced Setup Congurations...................................................................... 4-4
4-4 Security Settings ........................................................................................... 4-20
4-5 Boot Settings ................................................................................................ 4-22
4-6 Exit Options................................................................................................... 4-23
Appendix A POST Error Beep Codes
Recoverable POST Error Beep Codes ......................................................................A-1
Appendix B Software Installation Instructions
B-1 Installing Drivers..............................................................................................B-1
B-2 Conguring Supero Doctor III .........................................................................B-2
Table of Contents

Notes
X7SPA-L/X7SPA-H/X7SPA-HF/X7SPE-H/X7SPE-HF User’s Manual

Chapter 1: Introduction
1-1
Chapter 1
Introduction
1-1 Overview
Checklist
Congratulations on purchasing your computer motherboard from an acknowledged
leader in the industry. Supermicro boards are designed with the utmost attention to
detail to provide you with the highest standards in quality and performance.
Please check that the following items have all been included with your motherboard.
If anything listed here is damaged or missing, contact your retailer.
All the following items are included in the retail box only.
One (1) Supermicro Mainboard•
Two (2) SATA cables (CBL-0044L)•
One (1) I/O shield (MCP-260-00003-00)•
One (1) Supermicro CD containing drivers and utilities (CDR-X7-UP)•
One (1) User's/BIOS Manual (MNL-1166)•

1-2
X7SPA-L/X7SPA-H/X7SPA-HF/X7SPE-H/X7SPE-HF User’s Manual
X7SPA-L Image
Note: All graphics shown in this manual were based upon the latest PCB Revision
available at the time of publishing of the manual. The motherboard you've received
may or may not look exactly the same as the graphics shown in this manual.

Chapter 1: Introduction
1-3
X7SPA-H Image
Note: All graphics shown in this manual were based upon the latest PCB Revision
available at the time of publishing of the manual. The motherboard you've received
may or may not look exactly the same as the graphics shown in this manual.

1-4
X7SPA-L/X7SPA-H/X7SPA-HF/X7SPE-H/X7SPE-HF User’s Manual
X7SPA-HF Image
Note: All graphics shown in this manual were based upon the latest PCB Revision
available at the time of publishing of the manual. The motherboard you've received
may or may not look exactly the same as the graphics shown in this manual.

Chapter 1: Introduction
1-5
X7SPE-H Image
Note: All graphics shown in this manual were based upon the latest PCB Revision
available at the time of publishing of the manual. The motherboard you've received
may or may not look exactly the same as the graphics shown in this manual.

1-6
X7SPA-L/X7SPA-H/X7SPA-HF/X7SPE-H/X7SPE-HF User’s Manual
X7SPE-HF Image
Note: All graphics shown in this manual were based upon the latest PCB Revision
available at the time of publishing of the manual. The motherboard you've received
may or may not look exactly the same as the graphics shown in this manual.

Chapter 1: Introduction
1-7
Motherboard Layout (X7SPA-L/X7SPA-H/X7SPA-HF)
Important Notes to the User
Jumpers not indicated are for testing only.•
See Chapter 2 for detailed information on jumpers, I/O ports and JF1 front•
panel connections.
" " indicates the location of "Pin 1".•
MH2
MH3MH4
D17
JPW1
JUSB1
JD1
JPC3
JPUSB1
JWD1
JPG1 JBMC1
JPL1
JPT1
JPL2
JDIMM2
1
JDIMM1
JI2C2
JI2C1
JOH1
JL1
JL2
SP1
+
J2
J3
JBT1
JBAT 1
JPCIE1
JUSB5
JUSB4
JUSB3
JUSB2
JLPC80
R1050
JSMB1
FAN1 FAN2
JCOM2
JCOM4
JPI2C1
JWF1
J8
JVGA1
CD1
JPB
FA N
FAN
COMS CLEAR
2-3 DISABLE 1-2 ENABLE
JPB:BMC ENABLE/DISABLE
CD-in
JPT1:TPM ENABLE/DISABLE
1-2 ENABLE 2-3 DISABLE
AUDIO FP
T-SGPIO2 T-SGPIO1
JPI2C:PWR I2C
JSMB1:SMBus1
JPUSB1:USB WAKE UP
2-3 DISABLE 1-2 ENABLE
JWF1:DOM PWR
JD1:1-3 PWR LED
4-7 SPEAKER
ON:ENABLEJI2C2
OFF:DISABLE
JI2C1
OFF:DISABLE
ON:ENABLE
JL2:AUDIO FRONT PANEL SELECT
ON:AC'97 FRONT PANEL
OFF:HD AUDIO FRONT PANEL JPG1:VGA
2-3 DISABLE 1-2 ENABLE
2-3 DISABLE
JPL2:1-2 ENABLE
JPL1:1-2 ENABLE
2-3 DISABLE
JL1:CHASISS INTRUSION
JF1 PWR ON RST X OH/FF NIC2 NIC1 HDD LED PWR LED X NMI
2-3 NMI
JWD1:1-2 RST
JBT1:
LAN2
LAN1
I-SATA 5
I-SATA 2
I-SATA 4
I-SATA 1
I-SATA 3
I-SATA 0
SLOT1 PCI-E X4 (IN X16 SLOT )
SYS
CPU
KB/MOUSE
COM4
COM3
COM2
COM1
SODIMM2
SODIMM1
CPU
REV:1.00
X7SPA-L
J6
J5
J10 J11
J12
J13
J14 JPF

1-8
X7SPA-L/X7SPA-H/X7SPA-HF/X7SPE-H/X7SPE-HF User’s Manual
Motherboard Layout (X7SPE-H/X7SPE-HF)
Important Notes to the User
Jumpers not indicated are for testing only.•
See Chapter 2 for detailed information on jumpers, I/O ports and JF1 front•
panel connections.
" " indicates the location of "Pin 1".•
MH2
MH3MH4
D17
JPW1
JUSB1
JD1
JWD1
JPG1 JBMC1
JPL1
JPL2
JDIMM2
1
JDIMM1
JI2C2
JI2C1
JOH1
JL1
SP1
+
J2
J3
JBT1
JBAT 1
JPCIE1
JUSB5
JUSB4
JUSB3
JUSB2
JLPC80
R1050
JSMB1
FAN1 FAN2
JCOM2
JPI2C1
JWF1
J8
JVGA1
JPB
FA N
FAN
COMS CLEAR
2-3 DISABLE 1-2 ENABLE
JPB:BMC ENABLE/DISABLE
JPT1:TPM ENABLE/DISABLE
1-2 ENABLE 2-3 DISABLE
T- SGPIO2 T- SGPIO1
JPI2C:PWR I2C
JSMB1:SMBus1
JPUSB1:USB WAKE UP
2-3 DISABLE 1-2 ENABLE
JWF1:DOM PWR
JD1:1-3 PWR LED
4-7 SPEAKER
ON:ENABLEJI2C2
OFF:DISABLE
JL2:AUDIO FRONT PANEL SELECT
ON:AC'97 FRONT PANEL
OFF:HD AUDIO FRONT PANEL JPG1:VGA
2-3 DISABLE 1-2 ENABLE
2-3 DISABLE
JPL2:1-2 ENABLE
JPL1:1-2 ENABLE
2-3 DISABLE
JL1:CHASISS INTRUSION
JF1 PWR ON RST X OH/FF NIC2 NIC1 HDD LED PWR LED X NMI
2-3 NMI
JWD1:1-2 RST
JBT1:
LAN2
LAN1
I-SATA 5
I-SATA 2
I-SATA 4
I-SATA 1
I-SATA 3
I-SATA 0
SYS
CPU
KB/MOUSE
COM2
COM1
SODIMM2
SODIMM1
CPU
JPF

Chapter 1: Introduction
1-9
MH2
MH3MH4
D17
JPW1
JUSB1
JD1
JPC3
JPUSB1
JWD1
JPG1 JBMC1
JPL1
JPT1
JPL2
JDIMM2
1
JDIMM1
JI2C2
JI2C1
JOH1
JL1
JL2
SP1
+
J2
J3
JBT1
JBAT 1
JPCIE1
JUSB5
JUSB4
JUSB3
JUSB2
JLPC80
R1050
JSMB1
FAN1 FAN2
JCOM2
JCOM4
JPI2C1
JWF1
J8
JVGA1
CD1
JPB
F A N
FAN
COMS CLEAR
2-3 DISABLE 1-2 ENABLE
JPB:BMC ENABLE/DISABLE
CD-in
JPT1:TPM ENABLE/DISABLE
1-2 ENABLE 2-3 DISABLE
AUDIO FP
T-SGPIO2 T-SGPIO1
JPI2C:PWR I2C
JSMB1:SMBus1
JPUSB1:USB WAKE UP
2-3 DISABLE 1-2 ENABLE
JWF1:DOM PWR
JD1:1-3 PWR LED
4-7 SPEAKER
ON:ENABLEJI2C2
OFF:DISABLE
JI2C1
OFF:DISABLE
ON:ENABLE
JL2:AUDIO FRONT PANELSELEC T
ON:AC'97 FRONT PANEL
OFF:HD AUDIO FRONT PANEL JPG1:VGA
2-3 DISABLE 1-2 ENABLE
2-3 DISABLE
JPL2:1-2 ENABLE
JPL1:1-2 ENABLE
2-3 DISABLE
JL1:CHASISS INTRUSION
JF1 PWR ON RST X OH/FF NIC2 NIC1 HDD LED PWR LED X NMI
2-3 NMI
JWD1:1-2 RST
JBT1:
LAN2
LAN1
I-SATA 5
I-SATA 2
I-SATA 4
I-SATA 1
I-SATA 3
I-SATA 0
SLOT1 PCI-E X4 (IN X16 SLOT)
SYS
CPU
KB/MOUSE
COM4
COM3
COM2
COM1
SODIMM2
SODIMM1
CPU
REV:1.00
X7SPA-L
J6
J5
J10 J11
J12
J13
J14 JPF
9
5
4
3
10
11
8
7
6
1
2
12 14
15
16
18
19
23
24
25
26
27
28
29
30
31
45
50
13
32
33
41
42
43 44
X7SPA-L/X7SPA-H/X7SPA-HF Quick Reference
17
20 21
22
343536
Note 2: Jumpers that are not indicated are used for factory testing only.
1
37
1
38
1
39
1
40
47
46
49
48
51
52
53
Note 1: USB 3/4, COM3/4 are available on the X7SPA-L only. LAN2 and
SATA 2/3 are available on the X7SPA-H/X7SPA-HF/X7SPE-H/X7SPE-
HF only.

1-10
X7SPA-L/X7SPA-H/X7SPA-HF/X7SPE-H/X7SPE-HF User’s Manual
MH2
MH3MH4
D17
JPW1
JUSB1
JD1
JWD1
JPG1 JBMC1
JPL1
JPL2
JDIMM2
1
JDIMM1
JI2C2
JI2C1
JOH1
JL1
SP1
+
J2
J3
JBT1
JBAT 1
JPCIE1
JUSB5
JUSB4
JUSB3
JUSB2
JLPC80
R1050
JSMB1
FAN1 FAN2
JCOM2
JPI2C1
JWF1
J8
JVGA1
JPB
F A N
FAN
COMS CLEAR
2-3 DISABLE 1-2 ENABLE
JPB:BMC ENABLE/DISABLE
JPT1:TPM ENABLE/DISABLE
1-2 ENABLE 2-3 DISABLE
T- SGPIO2 T - SGPIO1
JPI2C:PWR I2C
JSMB1:SMBus1
JPUSB1:USB WAKE UP
2-3 DISABLE 1-2 ENABLE
JWF1:DOM PWR
JD1:1-3 PWR LED
4-7 SPEAKER
ON:ENABLEJI2C2
OFF:DISABLE
JL2:AUDIO FRONT PANELSELEC T
ON:AC'97 FRONT PANEL
OFF:HD AUDIO FRONT PANEL JPG1:VGA
2-3 DISABLE 1-2 ENABLE
2-3 DISABLE
JPL2:1-2 ENABLE
JPL1:1-2 ENABLE
2-3 DISABLE
JL1:CHASISS INTRUSION
JF1 PWR ON RST X OH/FF NIC2 NIC1 HDD LED PWR LED X NMI
2-3 NMI
JWD1:1-2 RST
JBT1:
LAN2
LAN1
I-SATA 5
I-SATA 2
I-SATA 4
I-SATA 1
I-SATA 3
I-SATA 0
SYS
CPU
KB/MOUSE
COM2
COM1
SODIMM2
SODIMM1
CPU
JPF
5
4
3
11
7
6
1
2
12 14
15
16
18
19 23
25
26
27
28
29
30
31
45
50
13
32
33
44
X7SPE-H/X7SPE-HF Quick Reference
17
20 21
22
343536
Note 1: USB 3/4, COM3/4 are available on the X7SPA-L only. LAN2 and
SATA 2/3 are available on the X7SPA-H/X7SPA-HF/X7SPE-H/X7SPE-
HF only.
Note 2: Jumpers that are not indicated are used for factory testing only.
1
37
1
38
1
39 52