Supermatic Premier Excel User manual

Cigarette Making Machine
Owner’s Manual
The Excel Cigarette Making Machine is durable, light weight, and
easy to handle with a slip-resistant mat and steady grip design. All
these features make it the superior choice.
We strongly recommend that you take time to fill out and mail your
warranty card. Product must be registered for warranty and service
agreement to be
GETTING TO KNOW YOUR PREMIER EXCEL
CIGARETTE MAKING MACHINE
PLEASE KEEP YOUR CIGARETTE MAKING
MACHINE OUT OF THE REACH OF CHILDREN.
Additional Warranty Information
Additional Warranty Limitations:
EVISULCXERUOYSIYTNARRAWDETIMILEMIT-ENODEDULCNIEHT
WARRANTY AND IT REPLACES ALL OTHER WARRANTIES OR CONDITIONS,
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. THESE WARRANTIES GIVE YOU SPECIFIC
LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM JURISDICTION TO JURISDICTION. SOME JURISDICTIONS DO NOT
DEILPMIRODESSERPXEFONOITATIMILRONOISULCXEEHTWOLLA
WARRANTIES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY
TO YOU. IN THAT EVENT, SUCH WARRANTIES ARE LIMITED IN DURATION
TO THE WARRANTY PERIOD. NO WARRANTIES APPLY AFTER THAT PERIOD.
Remedy Limitations:
IN NO EVENT SHALL THE COMPANY BE LIABLE FOR SPECIAL, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES TO THE PURCHASER OR TO ANY THIRD
PARTY, INCLUDING, WITHOUT LIMITATION, DAMAGES ARISING FROM
LOSS OF PROPERTY, ECONOMIC LOSS, LOST PROFITS, LOSS OF
BUSINESS OPPORTUNITY, OR STATUTORY OR EXEMPLARY DAMAGES,
WHETHER FROM NEGLIGENCE, WARRANTY, STRICT LIABILITY OR
UNDER ANY LEGAL THEORY IN CONTRACT, TORT, OR OTHERWISE.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU.
Return Procedure:
ANY PRODUCT RETURNED UNDER THIS ONE-TIME LIMITED WARRANTY
SHOULD BE SENT BY THE CUSTOMER VIA PREPAID MAIL OR COURIER
TO THE SERVICE CENTER LOCATED AT 2301 RAVINE WAY, GLENVIEW,
IL 60025, U.S.A. PLEASE INCLUDE WITH THE RETURNED PRODUCT
TWELVE DOLLARS AND FIFTY CENTS (US$12.50) FOR RETURN SHIPPING
AND HANDLING. THE COMPANY ASSUMES NO RESPONSIBILITY
WHATSOEVER FOR ANY LOSS OR DAMAGE DURING SHIPPING AND THE
CUSTOMER IS SOLELY RESPONSIBLE FOR ANY SUCH LOSS OR DAMAGE.
NOTE: PLEASE DO NOT RETURN THE PRODUCT TO THE STORE WHERE
YOU BOUGHT IT FOR SERVICE AS THEY ARE NOT AUTHORIZED TO
SERVICE THE PRODUCT.
PLEASE SEE THE ENCLOSED ONE-TIME LIMITED WARRANTY
CARD FOR MORE INFORMATION ON YOUR EXCEL
CIGARETTE MAKING MACHINE.
1) Crank Arm
2) Grip Handle
3) Nozzle
4) Tobacco Chamber
THANK YOU for purchasing the Premier® Excel
Cigarette Making Machine.

Read these instructions carefully before operating your
Excel Cigarette Making Machine.
1. Make sure the crank arm is fully
pulled to the left and click into the
locked position before you start.
(Figure A)
Slide open end of the king size
cigarette tube on nozzle.
2. Fill the corners first and then deposit
tobacco evenly into the chamber.
Do not pack too tightly.
(Figure B)
3. Hold the machine firmly by the
grip handle, then pull handle slowly
and evenly to the right until it stops,
then return the handle to its starting
position. Gently remove your filled
cigarette from nozzle.
(Figure C)
• Clean tobacco chamber and nozzle after every use.
• Clean your Excel Cigarette Making Machine regularly by blowing
water to clean the injector, tamper, and tobacco chamber.
• DO NOT OVERFILL THE MACHINE! Overfilling the chamber with
tobacco will cause the machine to jam. It will also bend the crank arm.
DO NOT FORCE THE HANDLE! If it feels like you have to force the handle,
you are using too much tobacco. STOP and REMOVE some from the chamber
•To avoid jamming of the device, do not use the following types of tobacco:
– OVERLY MOIST TOBACCO (SUCH AS PIPE TOBACCO)
– OVERLY DRY TOBACCO
– VERY FINE CUT TOBACCO
• KEEP FINGERS CLEAR OF THE TOBACCO CHAMBER WHILE
OPERATING CRANK ARM TO AVOID CUTS OR LACERATIONS!
(see Fig. D)
•NEVER ROTATE THE CRANK HANDLE WITHOUT A CIGARETE TUBE ON
THE NOZZLE. EXTENDED INJECTOR IS VERY SHARP!
(see Fig. E & F)
• DO NOT OVERLOAD THE TOBACCO CHAMBER! DOING SO WILL
(FIG. D) (FIG. E) (FIG. F)
FIG. A
FIG. B
FIG. C
Operating Instructions Maintenance, Care & Handling
tobacco residue from moving parts. Use a cotton swab and warm
before continuing. Overfilling will void all warranties through the manufacturer.
CAUSE RESISTANCE, AND FORCING THE CRANK ARM WILL VOID
THE WARRANTY!