Supermicro SuperServer SSG-540P-E1CTR36L User manual

USER’S MANUAL
Revision 1.0a
®
SSG-540P-E1CTR36L
SSG-540P-E1CTR36H

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes
no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update
or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note:
For the most up-to-date version of this manual, please see our website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual
at any time and without notice. This product, including software and documentation, is the property of Supermicro and/
or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except
as expressly permitted by the terms of said license.
IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGESARISING FROM THE USE OR INABILITYTO USE THIS PRODUCT
OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER
MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED
OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the
State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution
of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A or Class B digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in industrial environment for Class A device or in residential
environment for Class B device. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful interference with
radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in
which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only
to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
!
The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment,
nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical

property damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell such products
for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully
indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and
proceedings of any kind arising out of or related to such ultra-hazardous use or sale.
Manual Revision 1.0a
Release Date: March 15, 2022 mk
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this

to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 2022 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America

3
Preface
3
Preface
Preface
About this Manual
This manual is written for professional system integrators and PC technicians. It provides
information for the installation and use of the server. Installation and maintenance should be
performed by experienced technicians only.

updates on supported memory, processors and operating systems (http://www.supermicro.
com).
Notes
For your system to work properly, please follow the links below to download all necessary
drivers/utilities and the user’s manual for your server.
• Supermicro product manuals: http://www.supermicro.com/support/manuals/
• Product drivers and utilities: https://www.supermicro.com/wdl
• Product safety info: http://www.supermicro.com/about/policies/safety_information.cfm
If you have any questions, please contact our support team at:
[email protected]
This manual may be periodically updated without notice. Please check the Supermicro website
for possible updates to the manual revision level.
Secure Data Deletion
A secure data deletion tool designed to fully erase all data from storage devices can be found
on our website: https://www.supermicro.com/about/policies/disclaimer.cfm?url=/wdl/utility/
Lot9_Secure_Data_Deletion_Utility/
Warnings
Special attention should be given to the following symbols used in this manual.
Warning! Indicates high voltage may be encountered when performing a procedure.
Warning! Indicates important information given to prevent equipment/property damage


4
Contents
Contents
Chapter 1 Introduction
1.1 Overview...............................................................................................................................9
Models.................................................................................................................................9
1.2 System Features ................................................................................................................10
Front View .........................................................................................................................10
Drive Carrier Indicators..................................................................................................11
Control Panel.................................................................................................................12
Rear View..........................................................................................................................13
Power Supply Indicator..................................................................................................14
Top View............................................................................................................................15
1.3 System Architecture ...........................................................................................................16
1.4 Motherboard Layout ...........................................................................................................17
Quick Reference ...............................................................................................................18
Motherboard Block Diagram .............................................................................................20
Chapter 2 Server Installation
2.1 Overview.............................................................................................................................21
2.2 Unpacking the System .......................................................................................................21
2.3 Preparing for Setup ............................................................................................................21
Choosing a Setup Location...............................................................................................21
Rack Precautions ..............................................................................................................22
Server Precautions............................................................................................................22
Rack Mounting Considerations .........................................................................................22
Ambient Operating Temperature....................................................................................22
 ............................................................................................................................23
Mechanical Loading.......................................................................................................23
Circuit Overloading ........................................................................................................23
Reliable Ground.............................................................................................................23
2.4 Installing the Rails..............................................................................................................24
Identifying the Rails...........................................................................................................24
Releasing the Inner Rail....................................................................................................25
Installing the Inner Rails onto the Chassis .......................................................................26
Installing the Outer Rails onto the Rack...........................................................................27

5
Contents
2.5 Installing the Chassis into a Rack......................................................................................28
Removing the Chassis from the Rack ..............................................................................29
Chapter 3 Maintenance and Component Installation
3.1 Removing Power ...............................................................................................................30
3.2 Accessing the System........................................................................................................31
3.3 Processor and Heatsink Installation...................................................................................32
The Processor Carrier Assembly ......................................................................................33
The Processor Heatsink Module (PHM) ...........................................................................35
Installing the PHM into the CPU Socket...........................................................................36
Removing the PHM from the CPU Socket .......................................................................39
Removing the Processor Carrier Assembly from the PHM ..............................................40
Removing the Processor from the Carrier Assembly........................................................41
3.4 Memory...............................................................................................................................42
Memory Support................................................................................................................42
Memory Population Guidelines .........................................................................................44
Guidelines Regarding Mixing DIMMs ............................................................................44
DIMM Construction........................................................................................................44
Memory Population Sequence ......................................................................................44
Installing Memory...........................................................................................................45
3.5 Motherboard Battery...........................................................................................................46
3.6 Storage Drives....................................................................................................................47
Installing Drives.................................................................................................................47
3.7 System Cooling ..................................................................................................................49
Fans ..................................................................................................................................49
Installing the Air Shrouds ..................................................................................................50
3.8 Power Supply .....................................................................................................................51
Power Supply LEDs ..........................................................................................................51
3.9 PCI Expansion Cards ........................................................................................................53
3.10 Cable Routing Diagram.....................................................................................................54
Chapter 4 Motherboard Connections
4.1 Input/Output Ports ..............................................................................................................55
4.2 Power Connections ............................................................................................................56
4.3 Headers and Connectors ...................................................................................................56
Control Panel.................................................................................................................60

6
Contents
4.4 Jumpers..............................................................................................................................63
4.5 LED Indicators....................................................................................................................64
Chapter 5 Software
5.1 Microsoft Windows OS Installation.....................................................................................65
5.2 Driver Installation................................................................................................................67
5.3 SuperDoctor®5...................................................................................................................68
5.4 BMC....................................................................................................................................69
BMC ADMIN User Password ............................................................................................69
Chapter 6 Optional Components
6.1 Additional Storage Drives...................................................................................................70
6.2 Storage Control Cards .......................................................................................................70
6.3 Storage Drive Conversion Trays ........................................................................................70
6.4 TPM Security Module.........................................................................................................70
6.5 Intel Virtual RAID on CPU (VROC)....................................................................................71
Requirements and Restrictions.........................................................................................71
Supported SSDs and Operating Sytems ..........................................................................71
Additional Information .......................................................................................................72
Hardware Key ...................................................................................................................72
....................................................................................73
Status Indications..............................................................................................................78
Hot Swap Drives ...............................................................................................................78
Hot-unplug .....................................................................................................................78
Hot-plug .........................................................................................................................78
Related Information Links .................................................................................................78
Chapter 7 Troubleshooting and Support
7.1 Information Resources ........................................................................................................79
Website .............................................................................................................................79
Direct Links for the SSG-540P-E1CTR36(L/H) System................................................79
Direct Links for General Support and Information .......................................................79
7.2 BMC Interface .....................................................................................................................80
7.3 Troubleshooting Procedures .............................................................................................81
General Technique ............................................................................................................81
No Power ..........................................................................................................................81
No Video ...........................................................................................................................82
System Boot Failure .........................................................................................................82

7
Contents
Memory Errors ..................................................................................................................82
 ...........................................................................82
When the System Becomes Unstable ..............................................................................82
7.4 Crash Dump Using the BMC Dashboard............................................................................84
7.5 CMOS Clear .......................................................................................................................85
7.6 BMC Reset.........................................................................................................................85
7.7 Where to Get Replacement Components..........................................................................86
7.8 Reporting an Issue .............................................................................................................86
Technical Support Procedures ..........................................................................................86
Returning Merchandise for Service...................................................................................86
Vendor Support Filing System ..........................................................................................87
7.9 Feedback............................................................................................................................87
7.10 Contacting Supermicro......................................................................................................88
Appendix A Standardized Warning Statements for AC Systems
Appendix B System Specications

8
Contents
Contacting Supermicro
Headquarters
Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: [phone]
Fax: [phone]
Email: [email protected] (General Information)
[email protected] (Technical Support)
Website: www.supermicro.com
Europe
Address: Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
's-Hertogenbosch, The Netherlands
Tel: [phone]
Fax: [phone]
Email: [email protected] (General Information)
[email protected] (Technical Support)
[email protected] (Customer Support)
Website: www.supermicro.nl
Asia-Pacic
Address: Super Micro Computer, Inc.
3F, No. 150, Jian 1st Rd.
Zhonghe Dist., New Taipei City 235
Taiwan (R.O.C)
Tel: [phone]
Fax: [phone]
Email: [email protected]
Website: www.supermicro.com.tw

9
Chapter 1: Introduction
Chapter 1
Introduction
1.1 Overview
This chapter provides an outline of the functions and features of the SuperStorage server
         
capabilities.
System Overview
Motherboard X12SPI-TF
Chassis 847BTS-R1K23LPBP4
Processors 3rd Gen Intel Xeon Scalable in P+ (LGA-4189) socket
Memory Up to 2TB of ECC RDIMM/LRDIMM/LRDIMM 3DS with speeds up to 3200MHz in eight
slots
Storage
Thirty-six 3.5" hot-swap SATA/SAS bays
(Optional) Two rear 2.5" hot-swap SATA or NVMe bays
One M.2 SSD, PCIe 3.0 x4/SATA3 slot, M-Key 2280/22110
Two SATADOM (disk on module) headers
Expansion Slots 

I/O Ports
LAN: Two 10G BASE-T; one dedicated BMC port
USB: Two USB 2.0 ports
Two USB 3.2 Gen 1 ports
One VGA port
One serial port
System Cooling Seven heavy duty fans with Optimal Fan Speed Control
One air shroud
Power Two redundant 1200W power supplies, 80Plus Titanium level
Form Factor 4U; (WxHxD) 17.2 x 7.0 x 27.5 in. (437 x 178 x 699 mm)
A Quick Reference Guide can be found on the product page of the Supermicro website.
Models
• SSG-540P-E1CTR36L includes the Broadcom S3808 IT mode card.
• SSG-540P-E1CTR36H includes the Broadcom S3908 HW RAID card.

10
Chapter 1: Introduction
1.2 System Features
The following views of the system display the main features.
Front View
Figure 1-1. Front View
Storage Drives
Item Description
0-23 3.5" hot-swap SAS/SATA drive bays
Control Panel
Service/Asset Tag
with BMC Password
19
1
20
8
7
2
6
0
22
4
23
5
9
3
18
21
13
14
16
17
12
15
10
11

11
Chapter 1: Introduction
Drive Carrier Indicators
Each drive carrier has two LED indicators: an activity indicator and a status indicator. For RAID


VROC section in this manual.
Drive Carrier LED Indicators
Color Blinking Pattern Behavior for Device
Activity
LED
Blue Solid On Idle SAS/NVMe drive installed
Blue Blinking I/O activity
󰀨 Idle SATA drive installed
Status
LED
Red Solid On Failure of drive with RSTe support
Red Blinking at 1 Hz Rebuild drive with RSTe support
Red Blinking with two blinks
and one stop at 1 Hz
Hot spare for drive with RSTe support
Red 
󰀨
Power on for drive with RSTe support
Red Blinking at 4 Hz Identify drive with RSTe support
Green Solid on Safe to remove NVMe drive
Amber Blinking at 1Hz Do not remove NVMe drive

12
Chapter 1: Introduction
Control Panel Features
Feature Description
Power button The main power switch applies or removes primary power from the power supply to the server
but maintains standby power.
Reset Button Reboots the system
Power LED Indicates power is being supplied to the system power supply units. This
LED is illuminated when the system is operating normally.
HDD 
NIC LEDs 
Power Fail LED Indicates a power supply module has failed.
Information LED Alerts operator to several states, as noted in the table below.
Information LED
Color, Status Description
Red, continuously An overheat condition has occurred.
Red, blinking at 1Hz Fan failure, check for an inoperative fan.
Red, blinking at 0.25Hz Power failure, check for a non-operational power
supply.
Blue, solid UID has been activated locally to locate the
server in a rack environment.
Blue, blinking UID has been activated using the BMC to locate
the server in a rack environment.
Figure 1-2. Control Panel
Control Panel
Power
Information LED
HDD
Reset
NIC LED
Power LED
Power Fail LED
NIC LED

13
Chapter 1: Introduction
Rear View
Figure 1-3. System: Rear View
System Features: Rear
Feature Description
Power Supplies Two redundant power supply modules, PWS1 on the bottom, PWS2 on the top
Drives Optional 2.5" hot-swap storage drives, SATA or NVMe
BMC Dedicated LAN port for the BMC; for indicator details, see BMC LAN LEDs
USB Two USB 2.0 ports; two USB 3.2 Gen1 ports
LAN Two 10G BASE-T ports
VGA Video port
UID Switch/LED
󰀨
LED and a blue LED on the rear of the chassis.
This button can also be used to reset the BMC.
JBOD Ports JBOD expansion ports
Power Supplies
BMC
VGA
UID
Drives
USB 2.0
LAN
47 6 12
34
35
33
31
32
30
28
29
27
25
26
24
USB 3.2 JBOD Ports
Logical Storage Drive Numbers
Item Description
24-35 3.5" hot-swap SAS/SATA drive bays

14
Chapter 1: Introduction
Expansion Card Chassis Slots
Item Description
1
2
4
6
7
Power Supply Indicator
Power Supply Indicator
LED Color and State Power Supply Condition
󰀨 No AC power to modules
Amber, solid AC cord unplugged and in redundant mode OR power supply critical events causing
a shutdown, failure, OCP, OVP, fan fail, OTP, UVP
Amber, blinking Power supply warning events where the power supply continues to operate: high
temperature, over voltage, under voltage, etc
Green, blinking 󰀨
Green, solid Output on, functioning normally

15
Chapter 1: Introduction
Top View
Figure 1-4. System: Top View
System Features: Top
Feature Description
M.2 Sockets One socket for an M.2 SSD
Power Supply Dual redundant modules
SuperDOM Ports SATA ports allow for two Disk-on-Module SSDs mounted directly on the motherboard
DIMM Slots Eight memory slots
Processors 3rd Gen Intel Xeon Scalable with heatsink
System Fans Seven 8-cm fans with Optimal Fan Speed Control, FAN-0166L4
DIMM Slots
SuperDOM
Port
System Fans
Processor, Heatsink
Power Supply Modules
Power Distributor
M.2 Socket
SuperDOM
Port
Expansion
Slots

16
Chapter 1: Introduction
1.3 System Architecture
This section shows the locations of the system electronic components.
Figure 1-5. Main Component Locations
Storage Backplane
BPN-SAS3-846EL1
Motherboard
X12SPI-TF
Storage Backplane
BPN-SAS3-826EL1-N4
(not visible in picture;
under motherboard)

17
Chapter 1: Introduction
Figure 1-7. Motherboard Layout
1.4 Motherboard Layout

shown. See the table on the following page for descriptions. For detailed descriptions, pinout
Chapter 4 or the Motherboard Manual.
BIOS LICENSE
BAR CODE
MAC CODE
SAN MAC
DESIGNED IN USA
X12SPi-TF
REV: 2.00
IPMI CODE
PCH
621A
BMC
AST2600 X550
S-SGPIO1
JBT1
JPWR2
JSD2
JSD1
S-SATA1
S-SATA0
JSTBY1
JRK1
JPWR3
JPWR1
JNCSI
JF1
JVRM2
JVRM1
JPFR3
JPFR2
JPFR1
JL1
JPRG1
JPCK1
JPME1
JP4
FAN4 FAN3
FANB FANA
FAN5
FAN2
FAN1
NVME0/1
MH16
MH15
UID_SW
JPI2C1
JI2C_EXP1
JNVI2C
JIPMB1
MH4
MH6
MH1
MH9
MH8
MH7
MH5
MH3
MH2
VGA
JMP1
JMP2
BT1
LEDPWR
I-SATA4~7
M.2-H
COM1
DIMMG1 DIMMH1 DIMME1 DIMMF1
DIMMA1 DIMMB1 DIMMD1 DIMMC1
CPU
USB8(3.2 Gen 1)
USB6/7(3.2 Gen 1)
USB2/3
IPMI_LAN
LAN2 LAN1
I-SATA0~3
TPM/PORT80
UID-LED
CPU SLOT7 PCI-E 4.0 X8
CPU SLOT6 PCI-E 4.0 X16
CPU SLOT4 PCI-E 4.0 X16
CPU SLOT2 PCI-E 4.0 X8(IN X16)
CPU SLOT1 PCI-E 4.0 X8
USB4/5 (3.0)
LE4
USB 0/1
LEDBMC
JI2C_FP1
COM1
JIPMB1
JPME1
JI2C_FP1
USB2/3
USB6/7
(3.2 Gen 1)
DIMMG1
DIMMH1
DIMME1
DIMMF1
DIMMB1
DIMMA1
DIMMD1
DIMMC1
FAN5
JPWR1
JPWR2
JSD1
S-SATA1
I-SATA0~3
I-SATA4~7
S-SATA0
TPM/PORT80
JBT1
BT1
JL1 S-SGPIO1 FANB
FANA
SLOT1
SLOT2 SLOT4
SLOT6
SLOT7
JPRG1
JNCSI UID-LED
UID_SW
VGA
LAN2 LAN1
USB4/5 (3.2 Gen 1)
BMC_LAN
NVME0/1
M.2-H
JRK1
USB8 (3.2 Gen 1)
JP4
LED_PWR
JF1
FAN4
FAN3
JVRM1
JVRM2
JSTBY1
JNVI2C
JI2C_EXP1
JPWR3
JPI2C1
FAN2
FAN1
CPU
USB0/1
JSD2
LE4
LEDBMC

18
Chapter 1: Introduction
Quick Reference
Jumper Description Default Setting
JBT1 CMOS Clear Open (Normal)
JPME1 ME Recovery Pins 1-2 (Normal)
Connector Description
BMC_LAN Dedicated BMC LAN Port
COM1 COM Header
FAN1 ~ FAN5, FANA, FANB CPU/System Fan Headers
I-SATA0 ~ I-SATA7 Intel® PCH SATA 3.0 Ports (with RAID 0, 1, 5, 10)
JF1 Front Control Panel Header
JI2C_EXP1 SMBus I2C for Expander
JI2C_FP1 SMBus I2C for LCD Devices
JIPMB1 4-pin BMC External I2C Header (for an IPMI card)
JL1 Chassis Intrusion Header
JNCSI1 NC-SI Header for IPMI Support
JNVI2C1 NVMe I2C Header
JPI2C1 Power System Management Bus (SMB) I2C Header
JPWR1 8-pin Power Connector
JPWR2 4-pin Power Connector
JPWR3 24-pin Power Connector
JRK1 Intel RAID Key Header
JSD1, JSD2 SATA DOM Power Connectors
JSTBY1 Standby Power Header
LAN1, LAN2 Dual 10G Base-T Ports
M.2-H M.2 M-Key 2280/22110 (supports PCI-E 3.0 x4/SATA3) Slot
NVME0/1 PCI-E 4.0 x8 Slimeline SAS Connector
SLOT1 CPU PCIe 4.0 x 8
SLOT2 CPU PCIe 4.0 x8 (IN x 16)
SLOT4, SLOT6 CPU PCIe 4.0 x16
SLOT7 CPU PCIe 4.0 x8
S-SATA0, S-SATA1 SATA 3.0 Ports with SATA DOM Power
S-SGPIO Serial Link General Purpose I/O Connection Header
TPM1/PORT80 Trusted Platform Module/Port 80 Connector
UID-SW 
USB0/1 Back Panel Universal Serial Bus (USB) 2.0 Ports
USB2/3 Front Accessible USB 2.0 Headers
USB4/5 Back Panel USB 3.2 Gen 1 Ports
USB6/7 Front Accessible USB 3.2 Gen 1 Header
USB8 USB 3.2 Gen 1 Type-A Header
VGA VGA Port

19
Chapter 1: Introduction
LED Description State: Status
LE4 M.2 LED Blinking Green: Device Working
LEDBMC BMC Heartbeat LED Blinking Green: BMC Normal
LEDPWR Onboard Power LED Solid Green: Power On
UID-LED  

20
Chapter 1: Introduction
Figure 1-8. Motherboard Block Diagram
Motherboard Block Diagram
2
SPI
BIOS
PCI-E X1 G2
#13/10 USB2.0
6.0 Gb/S
ESPI
TMP432 *2 (RT1/RT2)
SPI
#5
DDR4
DMI3
#1
#2A DMI3
PECI:30
SOCKET ID:0
#2B
DMI X4
PCI-E GEN4 X8
SATA0-7
#0
SPI
M.2
PCI-E X4
PCI-E X16 G4
PCI-E X16 G4
PCI-E GEN4 X16
PCI-E GEN4 X16
PCI-E GEN4 X8
PCI-E X4 G4
(LANE REVERSE)
PCI-E X8 G4
8~15
SPI
SPI
0~7
#3A #3B
PCI-E GEN4 X8
PCI-E GEN4 X8
PCI-E TWO X4 G4
PCI-E X8 G4
6.0 Gb/S
#1
#0
SATA-DOM
#0~7
SSATA0-1
PCI-E X4 G3
#0~3
PCI-E X4 G3 (SATA X1)
#8~11
USB 2.0
Front USB2.0 x 2
Rear USB2.0 x 2
Front USB3.0 x 2
Type A USB3.2 Gen 1
Rear USB3.2 Gen 1 x 2
SPI
PCH
621A
USB 2.0
USB 3.2 Gen1
USB 2.0 x2
DDR4
2666/2933/3200
DDR4
2666/2933/3200
DDR4
2666/2933/3200
DDR4
2666/2933/3200
DDR4
2666/2933/3200
DDR4
2666/2933/3200
DDR4
2666/2933/3200
DDR4
2666/2933/3200
PCI-E x 16
PCI-E x 16
PCI-E x 8
PCI-E x 8
PCI-E x 8
SlimSAS
BMC
AST2600
BMC Boot
Flash
Dual Boot
Flash
NAND
FLASH
USB
USB
USB
USB
USB sSATA
Mini SAS HD
CPLD
(PFR)
SLOT 4
SLOT 6
SLOT 1
SLOT 2 SLOT 7
TPM HEADER
Temperature Sensor
LAN3 (To CMM)
RTL8211 FS-VS-CG
LAN 10G
X550-AT2
CPU1-B1 CPU1-A1 CPU1-D1 CPU1-C1 CPU1-G1 CPU1-H1 CPU1-F1
PVCCIN_CPU1 12V_STBY
VR13HC
7+1 PHASE
270W
LBG-R 1G
CPU1-E1
RGMII