Supero AOC-MTG-b2T User manual

Preface
User's Guide
Revision 1.0
AOC-MTG-b2T

AOC-MTG-b2T Add-on Card User's Guide
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor
assumes no responsibility for any inaccuracies that may be contained in this document, and makes no
commitment to update or to keep current the information in this manual, or to notify any person or organization
of the updates. Please Note: For the most up-to-date version of this manual, please see our website at
www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this
manual at any time and without notice. This product, including software and documentation, is the property of
Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is
not allowed, except as expressly permitted by the terms of said license.
IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS
PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN
PARTICULAR, SUPER MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,
SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING,
REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County
in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for
the resolution of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for
the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s
instruction manual, may cause harmful interference with radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference, in which case you will be required to correct the
interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies
only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling
may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: Handling of lead solder materials used in this product may expose you to lead, a
chemical known to the State of California to cause birth defects and other reproductive harm.
The products sold by Supermicro are not intended for and will not be used in life support systems, medical
equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or
other critical systems whose failure to perform be reasonably expected to result in signicant injury or loss of life or
catastrophic property damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell
such products for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer
agrees to fully indemnify, defend and hold Supermicro harmless for and against any and all claims, demands,
actions, litigation, and proceedings of any kind arising out of or related to such ultra-hazardous use or sale.
Manual Revision 1.0
Release Date: March 7, 2018
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part
of this document. Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 2018 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America

Preface
Preface
About this User's Guide
This user's guide is written for system integrators, IT professionals, and
knowledgeable end users. It provides information for the installation and use of the
AOC-MTG-b2T add-on card.
An Important Note to the User
All graphic images and layout drawings shown in this user's guide are based upon
the latest PCB revision available at the time of publishing of this user's guide. The
add-on card you have received may or may not look exactly the same as the graph-
ics shown in this user's guide.
Returning Merchandise for Service
A receipt or copy of your invoice marked with the date of purchase is required before
any warranty service will be rendered. You can obtain service by calling your ven-
dor for a Returned Merchandise Authorization (RMA) number. When returning the
motherboard to the manufacturer, the RMA number should be prominently displayed
on the outside of the shipping carton, and the shipping package is mailed prepaid
or hand-carried. Shipping and handling charges will be applied for all orders that
must be mailed when service is complete. For faster service, you can also request
a RMA authorization online (http://www.supermicro.com/RmaForm/).
This warranty only covers normal consumer use and does not cover damages in-
curred in shipping or from failure due to the alternation, misuse, abuse or improper
maintenance of products.
During the warranty period, contact your distributor rst for any product problems.
Conventions Used in the User's Guide
Pay special attention to the following symbols for proper system installation and to
prevent damage to the system or injury to yourself:
Warning: Important information given to ensure proper system installation
or to prevent damage to the components or injury to yourself.
Note: Additional information given to differentiate between various models
or provides information for correct system setup.
iii

AOC-MTG-b2T Add-on Card User's Guide
Naming Convention
SMC Networking Add-on Cards
Naming Convention for SIOM Network Adapters
A O C – M TG – b 2 T
1 – 2 3 – 5 6 8
Character Representation Options
1st Product Family AOC: Add On Card
2nd Form Factor S: Standard, P: Proprietary, C: MicroLP,
M: Super IO Module (SIOM), MH: SIOM Hybrid
3rd Product Type/Speed G: GbE (1Gb/s), TG: 10GbE (10Gb/s), 25G: 25GbE (25Gb/s),
40G: 40GbE (40Gb/s), 50G: 50GbE (50Gb/s), 100G: 100GbE
(100Gb/s), IBE: EDR IB (100Gb/s), IBF: FDR IB (56Gb/s),
IBQ: QDR IB (40Gb/s), HFI: Host Fabric Interface
4th Chipset Model (Optional) N: Niantec (82599), P: Powerville (i350), S: Sageville (X550)
5th Chipset Manufacturer (Optional) i: Intel, m: Mellanox, b: Broadcom
6th Number of Ports 1: 1 port, 2: 2 ports, 4: 4 ports
7th Connector Type (Optional) S: SFP+/SFP28, T: 10GBase-T, Q: QSFP+, C: QSFP28
8th 2nd Controller/Connector Type
(Optional)
G: GbE RJ45, S: 10G SFP+, T: 10GBase-T
iv

Preface
Contacting Supermicro
Headquarters
Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: [phone]
Fax: [phone]
Email: [email protected] (General Information)
[email protected] (Technical Support)
Web Site: www.supermicro.com
Europe
Address: Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
's-Hertogenbosch, The Netherlands
Tel: [phone]
Fax: [phone]
Email: [email protected] (General Information)
[email protected] (Technical Support)
[email protected] (Customer Support)
Web Site: www.supermicro.nl
Asia-Pacic
Address: Super Micro Computer, Inc.
3F, No. 150, Jian 1st Rd.
Zhonghe Dist., New Taipei City 235
Taiwan (R.O.C)
Tel: [phone]
Fax: [phone]
Email: [email protected]
Web Site: www.supermicro.com.tw
vi

AOC-MTG-b2T Add-on Card User's Guide
Table of Contents
Preface
Chapter 1 Overview
1-1 Overview ......................................................................................................... 1-1
1-2 About this Add-on Card................................................................................... 1-1
1-3 Key Features................................................................................................... 1-1
1-4 Technical Specications .................................................................................. 1-2
General............................................................................................................ 1-2
Host Interface.................................................................................................. 1-2
Networking Features ....................................................................................... 1-2
Stateless Ofoad Features ............................................................................. 1-3
NIC partitioning (NPAR) .................................................................................. 1-3
Virtualization Features..................................................................................... 1-3
Manageability .................................................................................................. 1-4
Flow Processingt............................................................................................. 1-4
Data Center Bridging ...................................................................................... 1-4
Power Savings ............................................................................................... 1-4
Power Consumption........................................................................................ 1-4
Physical Dimensions ....................................................................................... 1-5
Operating Conditions ..................................................................................... 1-5
1-5 Compliance/Operating Environment ............................................................... 1-5
1-6 Available SKUs ............................................................................................... 1-5
Chapter 2 Hardware Components
2-1 Add-On Card Image and Layout..................................................................... 2-1
2-2 Jumpers and Connectors................................................................................ 2-2
2-3 LAN Ports and LAN LED Indicators................................................................ 2-3
LAN Ports ................................................................................................... 2-3
LAN Port LED Indicators............................................................................ 2-3
Chapter 3 Installation
3-1 Static-Sensitive Devices.................................................................................. 3-1
Precautions ..................................................................................................... 3-1
Unpacking ....................................................................................................... 3-1
3-2 Before Installation ........................................................................................... 3-2
3-3 Installing the Add-on Card .............................................................................. 3-2
3-4 Installing Drivers on Windows OS .................................................................. 3-5
3-5 Installing Drivers on Linux (for Broadcom BCM57416) .................................. 3-5
Linux Drivers ................................................................................................... 3-5
Windows Drivers ............................................................................................. 3-7
vii

Chapter 1: Overview
1-1
Chapter 1
Overview
1-1 Overview
Congratulations on purchasing your add-on card from an acknowledged leader in
the industry. Supermicro products are designed with the utmost attention to detail
to provide you with the highest standards in quality and performance.
1-2 About this Add-on Card
Supermicro AOC-MTG-b2T features latest Broadcom NetXtreme BCM57416 Ether-
net controller that is designed for today’s rapid growing datacenter and cloud-scale
applications. In small form factor SIOM, it features VXLAN, NVGRE, and Geneve
along with Broadcom TruFlow technology that enables users to reduce CPU loads
and increases VM densities. In addition, NPAR (NIC Partitioning) technology pro-
vides exible connectivity for different networking requirements. The Supermicro
AOC-MTG-b2T is a truly exceptional 10GbE Ethernet Adapter for your continuously
growing cloud applications and datacenters.
1-3 Key Features
The product highlights of this add-on card include the following:
• Super I/O Module (SIOM) Form Factor
• Broadcom® BCM57416 10GbE controller
• Dual RJ45 Connectors
• TruFlow
• NPAR (NIC Partitioning)
• VXLAN and NVGRE
• Low latency RDMA over Converged Ethernet (RoCE)
• Asset Management Features with thermal sensor
• RoHS compliant 6/6

1-2
AOC-MTG-b2T Add-on Card User's Guide
1-4 Technical Specications
General
• Super I/O Module (SIOM) Form Factor
• Broadcom BCM57416 dual-port 10Gbps controller
• Dual RJ45 connectors
• TruFlow Technology
Host Interface
• PCI-E 3.0 (8GT/s)
• MCTP over SMBus
• Function Level Rest (FLR) support
• Message Signal Interrupt (MSI-X)
Networking Features
• Jumbo Frames (up to 9600-byte)
• 802.3x ow control
• Link Aggregation (802.3ad)
• Virtual LANs 802.1q VLAN tagging
• Congurable Flow Acceleration
• IEEE 1588 and Time Sync
• RDMA over Converged Ethernet (RoCE)

Chapter 1: Overview
1-3
Stateless Ofoad Features
• TCP, UDP, IPv4, IPv6 checksum ofoad
• Large Send Ofoad
• Receive Segment Coalescing
• TCP Segmentation Ofoad
• Large Receive Ofoad
• Receive Side Scaling (RSS)
• Transmit Side Scaling (TSS)
NIC partitioning (NPAR)
• 16 Physical Functions
• QoS per partition
• Partitioning control via sideband communication
• Up to 64MAC/VLAN lters per partition
• Stateless ofoad conguration per partition
• VEB/VEPA support
Virtualization Features
• NetQueue, VMQueue, and Multiqueue
• Support for 128 Virtual Functions
• VXLAN
• NVGRE
• Geneve
• Edge Virtual Bridging (EVB)

1-4
AOC-MTG-b2T Add-on Card User's Guide
Manageability
• Network Controller Sideband Interface (NC-SI)
• PXE and iSCSI boot
• Asset Management with Thermal Sensors
Flow Processingt
• Exact/Wildcard Match Flow Lookup
• VLAN insertion/deletion
• NAT/NAPT
• Mirroring
Data Center Bridging
• Priority-based Flow Control (PFC; IEEE 802.1Qbb)
• Enhanced Transmission Selection (ETS; IEEE802.1Qau)
• Quantized Congestion Notication (QCN; IEEE802.1Qau)
• Data Center Bridging Capability eXchange (DCBX; IEEE802.1Qaz)
• 8 trafc classes per port, fully DCB compliant per 802.1Qbb
Power Savings
• ACPI compliant power management
• PCI Express Active State Power Management (ASPM)
• Ultra low-power mode
• Pass-through Energy Efcient Ethernet (IEEE802.3az-2010)
Power Consumption
• Maximum power consumption: 11W

Chapter 1: Overview
1-5
Physical Dimensions
• Card PCB dimensions: 14.224cm x 6.89cm (5.6in x 2.71in) (LxW)
• Height of end brackets: standard – 12cm (4.725in), low-prole – 8cm (3.15in)
Operating Conditions
• Operating temperature: 0°C to 55°C (32°F to 131°F)
• Storage temperature: -40°C to 70°C (-40°F to 158°F)
• Storage humidity: 90% non-condensing relative humidity at 35°C
Note: This product is intended to be used with Supermicro server systems
or motherboards as an integrated solution package.
1-5 Compliance/Operating Environment
The AOC-MTG-b2T add-on card is compliant with the following environmental
regulations:
• RoHS Compliant 6/6, Pb Free
• AOC-MTG-b2T for Storage Systems, AOC-MTG-b2TM for Twin Systems.
• Please check SIOM Compatibility Matrix online http://www.supermicro.com/sup-
port/resources/AOC/AOC_Compatibility_SIOM.cfm
1-6 Available SKUs
SKUs Part Number Description
AOC-MTG-b2T AOC-MTG-b2T 2-port 10 Gigabit Ethernet Adapter
BKT-0086L Swappable bracket for 2U+ chassis
AOC-MTG-b2TM AOC-MTG-b2TM 2-port 10 Gigabit Ethernet Adapter
BKT-0085L Internal Bracket
Jumper
JBT1
JP1
JPG1
JPME1
JPME2

1-6
AOC-MTG-b2T Add-on Card User's Guide
Notes

Chapter 2: Hardware Components
2-1
AOC-MTG-b2T
REV: 1.00
DESIGNED IN USA
JLAN1JLAN2
Broadcom
BCM 57416
Chapter 2
Hardware Components
2-1 Add-On Card Image and Layout
The AOC-MTG-b2T Image
The AOC-MTG-b2T Layout
2
2
3
3
4
4
I
I
1. Broadcom BCM 57416 3. LAN1 RJ45 Port1
2. Jumper JP1 4. LAN2 RJ45 Port2

2-2
AOC-MTG-b2T Add-on Card User's Guide
2-2 Jumpers and Connectors
AOC-MTG-b2T
REV: 1.00
DESIGNED IN USA
JLAN1JLAN2
Broadcom
BCM 57416
2
3
I
The following major components are installed on the AOC-MTG-b2T:
1. Broadcom BCM57416 10GbE Controller
2. Dual RJ45 LAN (LAN 1/LAN 2) Ports
3. Super IO Module Networking Card
Jumper Description Default Setting Note
JP1 I2 Address Mode 1-2: ARP Mode 2-3: Fixed, 0x30

Chapter 2: Hardware Components
2-3
2-3 LAN Ports and LAN LED Indicators
LAN Ports
There are two LAN ports on the AOC-MTG-B2T. These LAN ports support connec-
tion speeds of 10Gbps. Use RJ45 type LAN cables.
Link LED Activity LED
The AOC-MTG-b2T Image
LAN Port LED Indicators
Each LAN port has two LEDs to indicate speed and data activity. Refer to the table
below for LED color and denition.
RJ45 LAN Port Link LED (Right) LED
State
LED Color Status Denition
Off Off No Connection
Green Solid Link
Green Flashing Active
RJ45 LAN Port Link LED (Left)
LED State
LED Color Denition
Green 10 Gbps
Amber 1 Gbps
Off 100 Mbps

3-1
Chapter 3: Installation
Chapter 3
Installation
3-1 Static-Sensitive Devices
Electrostatic Discharge (ESD) can damage electronic components. To avoid dam-
aging your add-on card, it is important to handle it very carefully. The following
measures are generally sufcient to protect your equipment from ESD.
Precautions
• Use a grounded wrist strap designed to prevent static discharge.
• Touch a grounded metal object before removing the add-on card from the
antistatic bag.
• Handle the add-on card by its edges only; do not touch its components.
• Put the add-on card back into the antistatic bags when not in use.
• For grounding purposes, make sure that your system chassis provides excellent
conductivity between the power supply, the case, the mounting fasteners and
the add-on card.
Unpacking
The add-on card is shipped in antistatic packaging to avoid static damage. When
unpacking your component or system, make sure you are static protected.
Note: To avoid damaging your components and to ensure proper instal-
lation, always connect the power cord last, and always remove it before
adding, removing or changing any hardware components.

3-2
AOC-MTG-b2T Add-on Card User's Guide
3-2 Before Installation
Before you install the add-on card, follow the instructions below.
1. Power down the system.
2. Unplug the power cord.
3. Use industry-standard anti-static equipment such as gloves or a wrist strap
and follow the precautions on page 3-1 to avoid damage caused by ESD.
4. Familiarize yourself with the server, motherboard, and/or chassis documenta-
tion.
5. Conrm that your operating system includes the latest updates and hotxes.
3-3 Installing the Add-on Card
Follow the steps below to install the add-on card into your system.
1. Remove the server cover and, if any, set aside any screws for later use.
2. Remove the add-on card slot cover. If the slot cover has a screw, place it
aside for later use.
3. Position the add-on card in front of the SIOM slot and gently push in both
sides of the card until it slides into the slot.
Note: This add-on card does not support hot plug. Please turn off the AC
power and remove the power cord from the wall socket before you install
or remove the add-on card.
SIOM card with the
bracket installed
Insert the SIOM
card into this slot

3-3
Chapter 3: Installation
Follow this step to install the add-on card if your system does not support a swap-
pable bracket. Insert the SIOM card in the motherboard and then install the moth-
erboard in the chassis. An internal bracket comes with the SIOM card 1U chassis
SKU. It needs to be installed onto the chassis.
4. Secure the add-on card to the chassis. If required, use the screw that you
previously removed.
5. Attach any necessary external cables to the add-on card.
6. Replace the system cover.
7. Plug in the power cord and power up the system.
Insert the SIOM card
into the motherboard
Install the bracket
onto the chassis
Install the motherboard
in the chassis
1
2
3
4
Tighten the screw
Note: It is recommended that the SIOM card installation above be com-
pleted by a system integrator or the manufacturer.

3-4
AOC-MTG-b2T Add-on Card User's Guide
Follow the steps below to install the add-on card into your system that supports a
swappable bracket. The add-on card must be installed in the swappable bracket
before it can be installed in your system
1. Install the add-on card into the swappable bracket.
2. Position the add-on card in front of the SIOM slot and gently push in both
sides of the card until it slides into the slot.
3. Once the card is in the slot, push both knobs in and turn to the right to lock
the card in the system. The left knob has the unlock/lock symbols next to it.
To ensure that the add-on is locked, make sure that the knob position indica-
tor is pointing to the lock symbol.

3-5
Chapter 3: Installation
3-4 Installing Drivers on Windows OS
Follow the steps below to install the drivers needed for your Windows OS support.
The controller comes with a driver on the CD-ROM CDR-NIC.
1. Run the CDR-NIC. (If you do not have a product CD-ROM, download drivers
from the Supermicro Support Website and then transfer them to your system.)
2. When the SUPERMICRO window appears, click on the computer icon next to
the product model.
Note: If the FOUND NEW HARDWARE WIZARD screen displays on
your system, click CANCEL.
3. Click on INSTALL DRIVERS AND SOFTWARE.
4. Follow the prompts to complete the installation.
3-5 Installing Drivers on Linux (for Broadcom
BCM57416)
Linux Drivers
Use the following procedures to install drivers on the Linux operating system.