Sur la table SLT-4401 User manual
BEFORE USE, PLEASE READ AND FOLLOW ALL IMPORTANT
SAFEGUARDS, WARNINGS, CAUTIONS AND OPERATING INSTRUCTIONS.
DIGITAL KETTLE
WITH AUTO INFUSER
USER MANUAL
www.mcappliances.us
SLT-4401 MODEL
Congratulations!
Congratulations! You now own an
incredibly versatile, convenient and
powerful tea maker.
To get the most out of your tea maker,
please read the manual carefully before
use, and keep this manual for easy
reference.
Enjoy!
Enjoy!
*This manual is only applicable to SLT 4401. All the contents in the manual are for reference
only during the user’s use and maintenance.
The pictures are for reference only.
*All the contents in the manual have been carefully checked. If there are any printing errors
or misunderstandings in the contents, the company reserves the right to interpret.
3
1. Read all instructions.
2. Do not touch hot surfaces. Use handle.
3. Do not let the power cord hang over edge of table or counter, or touch hot surfaces.
4. Always place tea kettle and power base on a flat, sturdy surface away from hot gas
or electric burners, or in a heated oven.
5. Beware, scalding may occur if the lid is removed during the heating cycle.
6. DO NOT immerse cord plug, power base, or kettle in water or other liquids.
7. Do not operate any appliance with a damaged cord or plug, or if it has
malfunctioned in any manner.
8. Close supervision is necessary when appliance is used by or near children.
9. Do not use accessories other than the ones that come with this tea kettle to avoid the
risk of fire or electric shock.
10. Use indoors only.
11. Do not use appliance for other than the intended use.
12. Do not attempt to repair item. Repairs should be done by authorized service
personnel only.
13. Do not overfill kettle, as boiling water may spill out.
14. Unplug the kettle from the outlet when not in use and before cleaning.
15. Extreme caution must be used when moving an appliance containing hot water.
16. This appliance is not intended for use by children or by persons with reduced
physical, sensory, or mental capabilities, or lack of experience and knowledge. Close
supervision is necessary when any appliance is used near children. Children should
be supervised to ensure that they do not play with the appliance. Keep the appliance
and its cord out of reach of children.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
IMPORTANT SAFEGUARDS Power Supply
• The Digital Kettle must use a standard socket, and before use, confirm that the
voltage frequency is consistent with the voltage frequency on the product label.
• Do not use with voltages other than AC 120V~ to avoid fire or electric shock. Do not use
the power cord or plug if damaged or frayed.
• Do not touch or unplug the power plug with wet hands, as this may cause
electric shock.
• Do not forcibly bend the power cord, bundle it or place it close to any other heating
devices as this may cause damage to the power cord, fire or electric shock.
• Please check the socket, power cord and power cord plug before usage. If found that
the socket hole is loose or the power cord or power plug is damaged, do not use.
• When the product is not in use for an extended period of time, please be sure to
unplug the power cord to prevent damage to the product.
Dangerous Matters
• Avoid actions that may cause damage to the power cord and power cord plug, such
as immersing the power cord or plug in water, placing the power cord near other
heating devices, forcibly bending, twisting, stretching, pressing, or bundling the power
cord. A damaged plug or cord may cause dangerous accidents such as short circuit,
electric shock and/or fire.
• Do not use this product for purposes other than those stated in the product manual,
such as drying items, etc., as this may cause a fire.
• Do not place flammable objects in the oven cavity around the product to avoid fire.
• If any smoke appears, turn off the appliance switch and unplug the power plug, and
keep the oven door closed to control the spread of the fire. Immediately stop the
operation of the product , unplug the power plug, and cut off the main power supply
in the house if necessary.
54
If any smoke appears, unplug the power plug. Immediately stop the operation of
the product and cut o the main power supply in the house if necessary.
WHAT’S IN THE BOX
1
2
3
Product may vary slightly from illustration.
1 Strength Display
2Temp Display
3Temp Button
4Strength Button
5Start Button
Seven temperature options: 158°F, 167°F, 176°F, 185°F, 194°F, 203°F, 212°F.
Rating: 120V / 60Hz / 1500W
5
4
GETTING TO KNOW YOUR
DIGITAL KETTLE
Kettle Lid
Infuser
Glass
Kettle
Power Base
76
PRODUCT ASSEMBLY METHOD
Handle
Power Base
Kettle Lid
Tea Cover
Tea Base
Glass
Body
98
TEA STRENGTH SOAKING TIME
158°F 167°F 176°F 185°F 194°F 203°F 212°F
Strong 6min 5min 4min 4min 4min 4min 3min
Medium 5min 4min 3min 3min 3min 2min 2min
Mild 4min 3min 2min 2min 2min 1min 1min
Custom 0~10min 0~10min 0~10min 0~10min 0~10min 0~10min 0~10min
Strength and tea soaking time table is as below:
OPERATION METHOD
SETTING UP KETTLE
1. Place the power base and kettle on a flat, sturdy surface.
2. Carefully, remove all packaging.
3. Place the kettle on the power base.
4. Plug the power base to a power source.
5. Press the start/pause button.
NOTE: A buzzing noise will sound as the infuser is rising.
6. Remove the kettle from the power base and carefully rinse it and the infuser
basket. Do not submerge the kettle under water or any other liquid.
7. Dry the kettle and infuser basket with a soft cloth.
8. Enjoy!
TEMPERATURE AND TIME FOR MODES
TEMPERATURE TIME KEEP WARM
TEMPERATURE
Green 3min 165˚F
White
Black 212˚F 175˚F
Herbal 4min 175˚F
Other
Temperature
158˚F to 175˚F
185˚F
195˚F to 212˚F
1~10min
1~10min
1~10min
155˚F
165˚F
175˚F
1110
165˚F
B. If you would like to customize your time and temperature:
1. Press the temperature button ( ) to toggle between the 7
different temperature settings.
2. Once the temperature you desire is on the display, press
the start pause button ( ).
3. Next, press the temperature button ( ) to select the number
of minutes you would like the infuser to be submerged for.
4. Then, press the start button ( ) to begin brewing process.
• The display will show the temperature rising to the
ideal temperature for the tea selected.
• Once the optimal temperature is reached, the infuser
will plunge into the water. Note: a buzzing noise is
normal as the diffuser pluges.
• Once the infuser is submerged in the water, the
display will countdown the minutes the infuser will be
submerged in the water.
• Once the time is up, the infuser will automatically rise,
the kettle will beep, and your tea will be ready!
• The keep warm feature will remain on for 60 min.
USING KETTLE
1. Place the power base on a flat, sturdy surface.
2. Fill the kettle with the desired amount of water. Do not exceed the Max
markings.
3. Place the kettle on the power base.
4. Fill infuser with tea and cover it with the infuser lid.
5. Carefully place the infuser on the tube inside the kettle.
6. Place the kettle lid on.
7. Plug kettle into the power source.
8. Select desired brewing option.
A. If you would like to use a preset tea settings:
1. Press the menu option ( ) to toggle
between the different tea options
2. Once the tea option you desire is on the display,
select the start/pause button ( ) to start the brewing
process.
• The display will show the temperature rising to the ideal
temperature for the tea selected.
• Once the optimal temperature is reached, the infuser
will plunge into the water. Note: a buzzing noise is
normal as the diffuser plunges.
• Once the infuser is submerged in the water, the
display will countdown the minutes the infuser will be
submerged in the water.
• Once the time is up, the infuser will automatically rise,
the kettle will beep, and your tea will be ready!
• The keep warm feature will remain on for 60 min .
Note: Kettle will enter sleep mode if no operation
occurs within 20 seconds.
KEEP WARM
Keep warm feature will automatically turn on after the brew cycle is
complete and remain on for 60 minutes.
TEMPERATURE DISPLAY PREFERENCE
To switch between Celsius and Fahrenheit, press the temperature ( )
and menu () buttons at the same time.
1312
TROUBLE SHOOTING
Malfunction Cause Solution
The unit does not work
The unit is not plugged
in Check if the unit is plugged in
Overheating
protection due to
high temperature
Let the unit rest for a few
minutes before turning it on
normally
Thermostat or heating
element is damaged Contact customer service.
Tea basket can not move
up and down
Air pump is
damaged Contact customer service.
Control buttons or knobs
are inoperable Circuit board failure Contact customer service.
The unit has normal
displaying but no heating
function.
The dry burning
temperature of the
heating plate
exceeds 230 F
Please unplug the unit ,
remove the kettle from power
base, pour an appropriate
amount of cold water into the
kettle, and let it cool for 30
minutes.
Display code E1 /Contact customer service.
Other manuals for SLT-4401
1
Table of contents
Other Sur la table Kettle manuals
