SURIA GRANDE Series User manual

In order to use the product safely, please read the instruction manual. In addition, please keep the
instruction manual properly.
GRANDE SERIES
Operation
Manual Book

SURIA GIANT FAN SERVICES SDN BHD (1122001-T)
NO 1-2, JALAN 2/14, DATARAN TEMPLER, BANDAR BARU SELAYANG,
68100 BATU CAVES, SELANGOR DARUL EHSAN.
NO OFFICE: 03-6127 0974
ENGLISH

SURIA GIANT FAN SERVICES SDN BHD (1122001-T)
NO 1-2, JALAN 2/14, DATARAN TEMPLER, BANDAR BARU SELAYANG,
68100 BATU CAVES, SELANGOR DARUL EHSAN.
NO OFFICE: 03-6127 0974
Summary
Thank you for purchasing a permanent magnet synchronous motor (PMSM)
industrial HVLS giant fan (Grande Series). This operation manual explains how to use
the product correctly. Please read this instruction carefully before use (installation,
wiring, operation, maintenance, inspection, etc). In addition, please use the product
after understanding the safety precautions of the product.
Safety Precautions
General notes:
Please contact our sales consultant and inform us about the problems with
your product due to damage/loss.
This instruction manual is subject to change without prior notice due to
product improvements/specification changes and to improve the
convenience of the instruction manual.
Dangerous:
ATTENTION. Please note all safety information in this instruction manual. Failure to
follow the instruction may result in death or serious injury. The company will not be
responsible for any damage caused by the customer’s failure to comply with the
contents in this instruction manual.
In order to prevent electric shock
Non-professional should not perform repairs/inspections/parts
replacement.
Do not operate with the controller case removed.
Do not perform wiring work while the power is on.
Otherwise there is a risk of electric shock.
Please cut off the power of all equipment before checking and inspection. Even
though the power off, there is residual voltage in the internal capacitor. Wait for
more than one minute after confirming that all indicators are off and the main AC
voltage has dropped to a safe level.

SURIA GIANT FAN SERVICES SDN BHD (1122001-T)
NO 1-2, JALAN 2/14, DATARAN TEMPLER, BANDAR BARU SELAYANG,
68100 BATU CAVES, SELANGOR DARUL EHSAN.
NO OFFICE: 03-6127 0974
Caveat:
Safety level is measure when industrial HVLS giant fan are performed. Before switch
on the power of industrial HVLS giant fan, please make sure that there are no people
touching and no other objects in the relevant area inside and below the industrial
HVLS giant fan.
In order to prevent electric shock
Modification of industrial HVLS giant fans and controllers is strictly
prohibited.
Do not remove the controller case/the button operation panel/touch pad
while the power is on.
To prevent fire
Please confirm whether the rated voltage of industrial HVLS giant fan is consistent
with the power supply voltage before switch on the power. If the main circuit power
supply voltage is used incorrectly, it will definitely cause damage to the product.
Preface
User notice
This manual is for installation, operation and maintenance personnel to read
carefully and follow strictly. The installation and maintenance of the
industrial HVLS giant fan must be performed by a professional.
Protect the product to avoid unnecessary damage during transportation or
installation.
Safety rules
Please confirm in advance whether the input voltage matches with this
product. The standard power supply is 220/415VAC ±10%, 50/60Hz.
When operating the controller, follow the steps of static electricity
protection (ESD) fixation. Otherwise, the internal circuit of the controller will
be damaged by static electricity.
The installation, operation and maintenance of this machine are limited to
the following persons:

SURIA GIANT FAN SERVICES SDN BHD (1122001-T)
NO 1-2, JALAN 2/14, DATARAN TEMPLER, BANDAR BARU SELAYANG,
68100 BATU CAVES, SELANGOR DARUL EHSAN.
NO OFFICE: 03-6127 0974
Designated safety officer, person who has received the necessary
training and has the necessary experience.
This manual instructions can helps you for any situations that may cause
harm to person, equipment or the environment, and must be strictly
followed.
Do not allow children to touch it when running/stopping.
Operating limits & specifications
Operating limits
The company shall not be liable for damage caused by improper use or use
of products beyond the prescribed scope.
This product and accessories are selected and designed according to the
parameters provided by users. If the parameters are changed, please inform
us to confirm the feasibility.
The product is not allowed to operate in unstable areas such as high
frequency vibration areas. Please make sure that the installation location is
stable.
The product shall not be operated in harsh conditions such as freezing,
corrosion, explosion and excessive concentration of dust and gas.
Specifications and model
Permanent magnet synchronous motor (PMSM) industrial HVLS giant fan
specification model parameter in table below:
Table 1: Permanent Magnet Synchronous Motor (PMSM) Fan Technical Data Sheet
Model
Voltage
(v)
Power
(watt)
Speed
(rpm)
Blade
Diameter (ft)
Air Flow
(CFM)
Noise
(dB)
Weight
(kg)
H60X
415
1500
52-50
24’-22’
425,000-
460,000
≤40
137-135
H60
415
1300
65-56
20’-18’
380,000-
355,000
≤40
130-128
H40
415
1000
80-70
16’-14’
320,000-
285,000
≤40
111-109
H50
415
750
95-85
12’-8’
250,000-
180,000
≤40
73-70

SURIA GIANT FAN SERVICES SDN BHD (1122001-T)
NO 1-2, JALAN 2/14, DATARAN TEMPLER, BANDAR BARU SELAYANG,
68100 BATU CAVES, SELANGOR DARUL EHSAN.
NO OFFICE: 03-6127 0974
Parts & Installation
Figure 1: Permanent Magnet Synchronous Motor (Grande Series) →14ft-24ft
Figure 2: Exploded View of Grande Series→14ft-24ft

SURIA GIANT FAN SERVICES SDN BHD (1122001-T)
NO 1-2, JALAN 2/14, DATARAN TEMPLER, BANDAR BARU SELAYANG,
68100 BATU CAVES, SELANGOR DARUL EHSAN.
NO OFFICE: 03-6127 0974
Figure 3: Parts of Grande Series (H60X, H60, H40)
Table 2: Name of components PMSM industrial HVLS giant fan (Grande Series
(H60X, H60, H40))
No item
Name of part
1
I Beam bracket
2
Fasterner
3
Hollow 3”x3”
4
Lower bracket
5
Frame motor
6
Gearless motor (IME- H40, H60, H60X)
7
Safety plate
8
Shaft lock
9
Washer
10
Star plate
11
Safety blade
12
Blade (24ft, 22ft, 20ft, 18ft, 16ft, 14ft)
13
Aluminium plate
14
Winglet
6
12
4
10
3
5
8
14
2
13
10
11
8
7

SURIA GIANT FAN SERVICES SDN BHD (1122001-T)
NO 1-2, JALAN 2/14, DATARAN TEMPLER, BANDAR BARU SELAYANG,
68100 BATU CAVES, SELANGOR DARUL EHSAN.
NO OFFICE: 03-6127 0974
Parts & Installation
Figure 4: Permanent Magnet Synchronous Motor (Grande Series) –H50
Figure 5: Exploded View of Grande Series→8ft-12ft

SURIA GIANT FAN SERVICES SDN BHD (1122001-T)
NO 1-2, JALAN 2/14, DATARAN TEMPLER, BANDAR BARU SELAYANG,
68100 BATU CAVES, SELANGOR DARUL EHSAN.
NO OFFICE: 03-6127 0974
Figure 6: Parts of Grande Series (H50)
Table 3: Name of components PMSM industrial HVLS giant fan (Grande Series
(H50))
No item
Name of part
1
I Beam bracket
2
Fasterner
3
Hollow 2”x2”
4
Lower bracket
5
Gearless motor (IME- H50)
6
Frame motor
7
Shaft lock
8
Safety plate
9
Star plate
10
Safety blade
11
Blade (12ft, 10ft, 8ft)
12
Aluminium plate
13
Winglet
13
4
8
2
1
5
7
9
11
3
12
6
10