Survivor GP-183-BLU User manual

System Warnings
Survivor 1000Wh
Portable Power Station
GP-183-BLU
User Manual
1. To reduce risk of electric shock, use only indoors and in dry locations.
2. Do not disassemble, puncture or crush this portable power station.
3. Must recycle and dispose of the product in accordance with local laws and regulations.
1. Please read the manual carefully before using the product.
2. Use of incompatible accessories may cause fire, electric shock or personal injury.
3. Do not use damaged or modified battery packs or devices.
4. Do not use the Portable Power Stationif any components are damaged or connect any damaged devices.
Otherwise it may cause a short circuit and risk of fire.
5. Please charge the product in a well-ventilated place, do not obstruct the air circulation.
6. If the Portable Power Station becomes damaged, battery leakage may occur; avoid contact and properly dispose
of Portable Power Stationimmediately. If you comeinto contact withthe liquid, please contact emergency medical
professionals.
7. Please do not expose the product to fire or excessive heat.
8. Please do not exceed the specified input AC voltage.
XT60
Type-B US
Battery Status
Input Status
Output Status
Charge Time Indicator
SYSTEM STANDBY FUNCTIONS
After 3 minutes of inactivity, the LCD will enter standby mode. The Portable
Power Station will remain ON in standby mode.
The Portable Power Station will automatically turn OFF if there is noactivity
within 10 minutes of turning the Portable Power Station ON.
During the operation, you can click the On/Off button to light on/off the
screen display at any time.
The LCD Screen will not enter standby mode when System Warning is present.

The UPS function of this product is not a professional-grade UPS function. Please do
not connect it to any equipment that has specific requirements for uninterrupted
power supply (such as data servers and workstations, etc.)
1. Press the ON/OFF buttonfor 3 seconds to turn ON.
2. Plug in AC appliances.
3. Press the AC buttonto toggleon/off the AC output function.
4. When the Portable Power Stationis not in use, please press the ON/OFF buttonto turn off to save power.
1. Ensure that the Portable Power Stationispowered on. Follow steps above to turn on.
2. Press the USB buttonto toggleon/off the USBoutput.
3. Plug in USB devices.
ON/OFF
USB
How to use UPS mode
1. Plug in the AC input to power the Portable Power Station. The product automatically turns on and enters the
charging mode.
2. Plug in any AC device to provide emergency battery back up power in case of mains power outage.
3. Press the AC button to turn on the AC output function. The AC outlets will enter into the UPS mode.
4. In the event the main power is lost, the Portable Power Station will continue to function as an emergency power
source.
Ensure that the AC input terminal is connected to the ground wire stably and normally.
To use the back up UPS mode, the total power of AC devices/appliances cannot
exceed 700W. Otherwise the Portable Power Station will not enter the UPS mode.
The Portable Power Station will still use the battery back up power to provide up
to 1000W of energy output.
1. Press the ON/OFF button for 3 seconds to turn ON.
2. Plug in the DC device.
3. Press the DC button to toggle on/off the DC output function.
4. When the Portable Power Station is not in use, please press the ON/OFF button to turn off to save power.
Please charge the GP-183-BLU before using.
Please fully charge the battery before storing.Please check the GP-183-BLU remaining power level every 3
months and recharge if necessary.
There are 3 charging ports on the Portable Power Station. AC Input cable included.
You can purchase solar panels and dedicated cable accessories that match the Portable Power Station to achieve
a high-power solar fast charging experience.
The maximum voltage of solar panels that Portable Power Station can support is 30V
with a maximum current of 7A.
Any Changes ormodifications not expresslyapproved bythe party responsiblefor compliance could void the
user's authorityto operatethe equipment.
Note: This equipment has been tested and found to complywiththe limitsfora ClassBdigital device,
pursuant to part 15of the FCC Rules. These limitsare designed to provide reasonable.
protectionagainst harmful interference ina residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used inaccordance withthe instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur ina particular installation. If this equipment does cause harmful interference to radio ortelevision
reception, whichcan bedetermined byturning the equipment off and on, the user is encouraged to try to
correct the interference byone ormore ofthe following measures:
-Reorient or relocatethe receiving antenna.
-Increase the separationbetween the equipment and receiver.
-Connect the equipment into anoutlet ona circuit different from that to which the receiver is connected.
-Consult the dealeroranexperienced radio/TV technicianfor help.
This equipment complies withFCC radiation exposure limits set forth foran uncontrolled environment. This
equipment should beinstalled and operated withminimum distance 20cm between the radiator & your
body.
This device complies withpart 15of the FCC Rules. Operationis subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that maycause undesired operation.
NOTE
DC
AC Input Port DC5521 Input Port
Solar Panel Input Port
Portable Power Station supports Solar Panel charging (Max 200W).