SV3C HX Series User manual
English / Русский / Français / Español / Deutsch / Italiano
1
/
1212
12
Quick Start Guide for SV3C POE Camera
English / Русский / Français / Español / Deutsch / Italiano
3
/
1212
12
1.
About camera
1.1
Product should contain:
1.2
Product interface.
1.3
How to fit Waterproof lid.
IP Camera * 1 Power adapter * 1
User manual * 1 Network cable * 1
Screws bag * 1
English / Русский / Français / Español / Deutsch / Italiano
4
/
1212
12
2.
Connect camera
2.1
Connect network cable to router and plug in power adapter.
2.2
Connect LAN cable and power to camera, it needs about one minute to
self checking and then start working.
Network indicator light (green): always flashing means network data
transmission is normal.
The router must be able to connect to the Internet!
Please use the standard power supply.
English / Русский / Français / Español / Deutsch / Italiano
5
/
1212
12
2.3 Two-ways Connect Camera
1)
Use POE Switch for power supply
2)
Use Power Adapter for power supply
Note:
This is a POE(Power Over Ethernet) Camera:
There are two types of charging with the POE camera.
1. Single cat5 cable for both Power and Data transmission, no need power adapter. (It
requires a separate PoE Injector or PoE Switch (both not included).)
2. There are three types of Poe power supply on the market, 48V, 24V, 12V. Our poe
cameras are using the standard Poe type: 48V Poe power supply. Its security level is
higher than the other two.
The POE function of our camera can work with 48V POE switch with IEEE 802.3af.
English / Русский / Français / Español / Deutsch / Italiano
6
/
1212
12
3.
View via mobile phone
3.1
Download “CamHi” from Google Play （Andriod Phone）/ App Store
(Iphone) or scan the
QR code below to get APP information.
Android
IOS
3.2
Run APP and Add Camera.
2. Click LAN
search to search
camera UID
3. Click into
camera UID and
click “Done”
1. Click “Add
Camera”
English / Русский / Français / Español / Deutsch / Italiano
7
/
1212
12
3.3 After adding the camera, click online camera to view real-time
image
Click here
to monitor
You can only view one camera
at one time
Note: If you still can not set up camera succeed, please
refer to next page on how to set up camera’s on Internet
Explorer. Or contact customer service
English / Русский / Français / Español / Deutsch / Italiano
8
/
1212
12
4.View via PC
4.1 Install “Searchtool”fromour website: www.sv3c.com/cd, then
run it tofind thecameras.
Click “Next” can modify network parameters of the camera if you need to
change them.
English / Русский / Français / Español / Deutsch / Italiano
9
/
1212
12
Inbrowseryoucanviewimageandconfigureallparametersofcamera.
if you are not using IE browser some settings will be missing.
4.2 Access to the camera through IE browser on windows PC.
4.3 Set POE via Internet Explorer on PC
You can download PC software on our website: www.sv3c.com/cd
Note: If you can’t connect this camera with your NVR, Pls try to
change your IP Address Keep Fixed, please refer to next page on
how to change cameras’ IP Address keep Fixed
If you want to reset factory about your cameras, just pls restart or reset
thecamera viamobilephoneor PC or Search Tool
English / Русский / Français / Español / Deutsch / Italiano
10
/
1212
12
4.4 Connect and manage the multiple cameras via camera’s PC software
on windows PC!
3. Login IE
browser by
using camera ip
address. Enter
“Network” page
1. You can
select Fixed
or Dynamic
ip address
If you want to
customize the
IP address ,
you can change
it here
2. Save settings
English / Русский / Français / Español / Deutsch / Italiano
11
/
12
5.Set up FTP and Email and Motion
Detection
5.1 Follow as below steps to find installation files for setup FTP and
email on our website www.sv3c.com/cd .
1. Enter SV3C website,
find Support and
Download, click
Download
2. Find “HX series”
and click it
3. Find user Manual about how
to use the FTP and email with
motion detection
English / Русский / Français / Español / Deutsch / Italiano
12
/
12
5.2 Set motion detection alarm recording on the phone.
5.3 Set schedule recording on phone.
Motion detection alarm recording is recommended when youarewithout NVR
1. Open “Motion
Detection”
Set motion
detection area
and level
2. Set e-mail alarm
or FTP
2. Open “Enable
Record”
Select “All
Days”
If you don’t need the camera record to All Days, please turn off “Enable
Record” or select “None”.
You can also set more detailed recording schedule on browser or PC software.
English / Русский / Français / Español / Deutsch / Italiano
13
/
12
5.4 Playback record on phone.
5.5 Set Time Zone on phone.
These
parameters can
be set in more
detail via IE
browser on the
PC!
When your time is DST(daylight saving time), please turn on DST button!
1.Click here to
set time zone
for the camera
2.Select time
zone according
to your phone
time
3. Click here to reboot
camera and save the
new time zone
Click ”online
”
Click into
online
camera
English / Русский / Français / Español / Deutsch / Italiano
14
/
12
Quick Start Guide
/
Краткоеруководство
/
Quidede Démarrage Rapide
/
Guíadeinicio rápido
/
SchnellstartAnleitung
/
GuidaRapida
7. More info
This manual is to help customers to know and use the camera quickly, For
detailed instructions and video tutorials please refer to our website
www.sv3c.com/cd .
This manual may have descriptions and operations that do not match the
product, If you have any questions or need technical support Please feel free
to contact us.
Other manuals for HX Series
1
Table of contents
Other SV3C Security Camera manuals
