SV3C Cloud Series User manual
Solar Wireless Security Camera
Thank you for choosing our security camera. Please read the quick
installation guide carefully before using and keep it in good conditions.
Quick Installation Guide
Cloud-Series
Solar Charger Include:
1
1
for Camera
2
2
Floodlight LEDS
3
3
4
4
5
5
001
6
6
HD
HD
HD
7
s
s
8
8
Charge the Camera
lt's recommend to fully charge the battery before mounting the camera outdoors.
Charge the battery with the Solar Panel (Not
included if you only purchase the camera).
Charge the battery with a power adapter.
(not included)
Charging Indicator:
RED LED: Charing !Blue LED: Fully charged !
For better rain protection, when charging
with a solar panel, please only open the
small rubber labeled "POWER“ and keep
the outside rubber closed well.
Please keep the rubber closed always after
installation of the Micro SD card.
9
9
Follow the below chart. Drill the holes according to the positioning sticker provided.
Screw the expansion nut into the holes, then connect the bracket to the expansion
nut with the screw to complete the installation.
10
10
11
11
Please choose a location for your solar panel that gets the most sunlight throughout the
year. The solar panel needs only afew hours of direct sunlight to sufficiently power up
your camera daily. The amount of energy that the solar panel can produce is affected by
weather conditions, seasonal changes, geographic locations, etc.
Important to know
Troubleshooting
Make sure the solar panel is not blocked. The energy harvesting efficiency drops
drastically even when a small portion of the solar panel is blocked.
Please don't install the solar panel completely horizontally. Otherwise your solar
panel might accumulate dust and other debris easily. It's advised to install the solar
panel angularly to receive the most direct sunlight.
Wipe the solar panel regularly to remove dust or debris.
Please charge the batteries in temperature between -20.5°C ~48.5*C(-59F~120*F).
The solar panel won't charge the camera at temperatures below -20.5%C.
Stop Charging the Battery-powered Cameras
If your solar panel can't charge the camera anymore, try the following solutions:
solar panel and camera is stable.
buildings, or other objects.
or above48.59C(120*F).
12
12
B a s e
S c r e w s
W a l l A n c hors
W a l l
1
Locking Screw Cap Socket nut
Solar Panel
F r o n t
B a c k
2
3
Fix the base to your mounting location using the included screws.
to drill a hole in the wall,then insert the anchor nail into the hole ,
and fix the base with screws.
First,install the locking screw cap into the universal joint and then screw
the circular socket nut into the universal joint.
Screw the universal joint into the back of the solar panel.Tighten it firmly
with the attached nut.
13
13
B a s e
4
5
°
S leev e R o d
6
Screw the locking screw cap into the base.Make sure that the universal
joint is angled upward.
When adjusting the solar panel left or right,loosen the locking screw cap,
turn the sleeve rod,and tighten the locking screw cap when the panelis
in position.
Solar pane's angle can be adjusted up and down up to 90°
Tip:After the installation is complete,please check that all locking mechanisms
are tightly secured.
Locking Screw Cap
Locking Screw Cap
14
14
Ideal Angle = Local Latitude + 5°
Find the area that gets the most direct sunlight throughout the day
Angle the solar panel at local latitude+ 5 degree upward
Point it south if in the northen hemisphere and north if in the
southern hemisphere.
HOW TO POSITIONYOUR SOLAR PANEL
1
2
3
Cable length:3m
Operating voltage:5V DC
Operating temperature:-20.5°C to 48.5°C(-5°F to 120°F)
BASICPARAMETERS
15
HD
HD
16
Mirco-SD
17
18
HD
HD
HD
19
Table of contents
Other SV3C Security Camera manuals
