SV3C POE HX Series User manual

Quick start Guide
for sv3c poE Camera
US Email address: [e-mail]
UK Email address: [e-mail]

1.About Camera
2.Connect Camera
3.Add Camera via LAN cable
4.
5.View Via PC
6.More Info
Set Micro SD Card Recording
01
02
04
07
11
16

The router must be able to connect to the Internet!
Please use the standard power supply.
2.2 Connect LAN cable and power to camera, it needs about
one minute to self checking and then start working.
2) Use Power Adapter for power supply
1) Use POE Switch for power supply
2.3 Two-ways Connect Camera
2. There are three types of Poe power supply on the market, 48V,
24V, 12V. Our poe cameras are using the standard Poe type: 48V
Poe power supply. Its security level is higher than the other two.
The POE function of our camera can work with 48V POE switch
with IEEE 802.3af.
Note:
This is a POE(Power Over Ethernet) Camera:
There are two types of charging with the POE camera.
1. Single cat5 cable for both Power and Data transmission, no need
power adapter. (It requires a separate PoE Injector or PoE Switch
(both not included).)
2. Connect camera

4. Click “Power is on,
next step”
5. Click “Connected network
cable” to search for devices
on the same network 6.Click the camera
you want to add
7. Click “ADD TO”
8. Enter the camera
name
3.2 Add Camera.
Please click “Device in use” to add a camera via UID
number if you have connected the camera on other
devices, UID is in this format ZZZZ-123456-ABCDE
3. Click “New device”
2. Click “IP camera” to
add camera
1.Click “ + ” to add device
3.1 Download “CamHipro” from Google Play (Android Phone) /
App Store(iPhone) or scan the QR code below to get APP
information.

Share camera, please click “Add a sharing device” to scan
camera UID QR code, then you can add the camera on a
different device.
3.3 Add a sharing device.
3.4 View Camera
Click setting button after
connected the camera
successfully
Click here to get the QR
code of the connected
camera
Click “Add a sharing
camera” to scan QR code
Click the blank area to
monitor
Panup/down/left/right
onlyavailablefor ptz camera.
4.1 SD Card Setting and Alarm Setting
4.Set Micro SD Card Recording
1. Click “format SD card”
before the first recording
2. Open “Motion
detection alarm”
3. Open “Alarm recording
to SD card”
Adjust the motion
detection area and
sensitivity
Motion detection
custom time setting
Click “Audio Settings”
to adjust the volume
of Microphone and
Speaker

1.Alarm push:
✲ Please open “Receive alarm push” if you need text
notifications.
2.Equipment alarm:
✲ Please open “Motion detection alarm” to make
motion detection work.
3. Alarm linkage:
✲ Open “Alarm recording to SD card” after format the
SD card if you need motion detection recordings.
✲ Select “Easy setup”, if you need the motion detection
work all days. Click “advanced” button to set motion
detection schedule for the camera.
✲ Click “Adjust motion detection” to adjust the detection
area and sensitivity. Drag the frame to change the
motion detection zone. You can adjust the sensitivity
from 1 to 50, 1 is the lowest setting.
✲Open “Alarm capture sent to Email” if you need
Email alert with pictures, click “Configure Email” to
complete Email settings, for more detailed settings,
please refer to the instruction on SV3C website or
contact SV3C customer service.
✲Open “Alarm recording to FTP” and “Alarm capture
saved to FTP” if you need to save motion detection
recordings and pictures to FTP server. Click “Configure
FTP” to complete FTP settings, please refer to the FTP
instruction on SV3C website.
✲ Motion detection alarm recording is recommended
when the Micro SD card is small.
4.2 Schedule Recording Setting
3. Play or download
video files
1. Open “Enable Record”
2. Select “Easy setup”
Schedule recording custom
time setting
If you select “Easy setup”, the camera will record for 7/24
all days. Click “advanced settings” to set recording
schedule for the camera.
4.3 Playback Record
1.Click this icon to play
back recordings saved
in SD card 2. Click the search button
to find more recordings

4.4 Set Camera Time Zone
1. Click here to set
camera time zone 2.Choose your local
time zone to save 3. Click “Set device time
zone” to save settings
and prompt camera to
restart
Note: When your time is DST(daylight saving time),
please turn on DS button, otherwise the recording time
will be incorrect.
5.1 Access to the camera through browser on PC.
5.View Via PC
5.2 Set POE camera via browser on PC
Note: If you can’t connect this camera with your NVR,
Please try to change your IP Address Keep Fixed, please
refer to next page on how to change cameras’ IP Address
keep Fixed.
If you want to reset factory about your cameras, just pls
restart or reset the camera via mobile phone or PC.
Please download PC software on SV3C website:
www.sv3c.com

1.Login IE browser by
using camera ip address.
Enter “Network” page
2.You can select Fixed or
Dynamic ip address
If you want to customize
the IP address , you can
change it here
3.Save settings
Please enter 8.8.8.8
5.3 Connect and manage multiple cameras at a same time via
P2P PC Client software on windows and MAC PC!
This manual is to help customers to know and use the
camera quickly, For detailed instructions and video
tutorials please refer to SV3C www.sv3c.com
6. More Info
This manual may have descriptions and operations
that do not match the product, If you have any questions
or need technical support Please feel free to contact us.
US Email address:
UK Email address:
[e-mail]
[e-mail]