Svive Virga AC1200 User manual

VIRGA AC1200
WIFI PCIE ADAPTER
QUICK INSTALLATION GUIDE

Congratulations on your purchasing of
Svive Virga AC1200 Wifi PCIe adapter.
This Wireless Adapter provides a
simple, economical, standard and high-
peormance solution for you. Please read
Quick Installation Guide before using the
product and save it for future reference.

PRODUCT OVERVIEW
The product is a highly integrated and cost-eective Wireless Adapter that provides PCI Express inteace,
and full compliance with IEEE802.11ac and IEEE802.11a/b/g/n standards. Wireless transmission rates can
reach up to 1200Mbps. Using the Wireless Desktop PCI-E Adapter not only can you connect your desktop
computer to a high-speed Wi-Fi network and experience faster files transmission and high-speed Internet
browsing from fuher distances across your home than that in previous-generation Wireless n technology,
but also you can enjoy high peormance wireless viewing HD multimedia and real-time online war game
when the PCI-E Adapter workin 11ac 5G mode. This Desktop PCI-E Adapter is the best choice for the desktop
computer users who want to enjoy a beer wireless peormance and high-speed Wi-Fi network.
FEATURES
• Complies with IEEE 802.11ac 、IEEE 802.11n/a/b/g standards
• Suppos PCI-E 1.1 X1 bus
• 2.4G/5G dual frequency optional, 5GHz band rate up to 900Mbps,
• 2.4GHz band rate up to 300Mbps
• Suppos Cisco CCX
• Suppos multiple BSSID
PACKAGE CONTENTS
• Svive Virga Wifi PCI adapter
• Two antennas
HARDWARE INSTALLATION
Steps:
1. Please shut down the computer, unplug its power cord and remove its chassis cover.
2. Inseing PCI EXPRESS X1 PCI Bus po of Wireless Adapter into PCI EXPRESS X1 slot of PC.
Press the Wireless Adapter into the slot firmly.
3. Install chassis cover of PC.
4. Reconnect the computer power cord, and switch computer power on.
Suppoing Operating Systems:Microso Windows 7 32/64, Windows 10 32/64.
Environments:
Operating Temperature: 0、~40、,
Storage Temperature: -10、~70、,
Operating Humidity: 10%~90% non-condensing,
Storage humidity: 5%~90% non-condensing.

SOFTWARE INSTALLATION
The following instruction used to set up the Wireless Adapter run on the PC whose operating system is
windows 10 64-bit. Please refer to soware installation instruction of windows 10 64-bit for other operating
systems.
1. Download driver from www.svivegaming.com
2. Unzip the downloaded file
3. Double click the setup.exe file. Click “Yes” buon to sta installation.
4. The Setup wizard inteace will show as shown.

5. Click the “Finish” buon to resta computer. The installation is now finished.
ACCESSING WIRELESS ADAPTER TO WIRELESS NETWORK
1. Aer the soware is installed successfully,
security key select the wireless network that you
want to connect by click the “Connect “buon.
2. Please enter the network security key. (You
could view network on the web page of Router
or AP). Click “Next “buon.

3. Wireless network is connecting. Please wait.
4. The wireless network connection is successful.
APPENDIX: TECHNICAL SPECIFICATIONS
Model Svive Virga WiFi PCIe Adapter
Chipset RTL8812AE
Standards IEEE802.11ac, IEEE802.11n、IEEE802.11b, IEEE802.11g, IEEE802.11a
PCI Bus PCI EXPRESS X1
Sensitivity @PER 5G 11ac
VHT80M MCS9:-55dBm @10% PER
HT40M MCS7: -65dBm @10% PER
HT20M MCS7: -68dBm @10% PER
2.4G 11N
HT40M MCS7: -65dBm @10% PER
HT20M MCS7: -68dBm @10% PER
OFDM 54M:-70dBm@10% PER
11b 11M:-81dBm@8% PER
Transmit Power 20dBm (Max.)
WiFi Frequencies: 2.4G: 2412-2472MHz
5G: 5180-5825MHz
Antenna 2*3dBi dual band removable omnidirectional antennas
Transmission Rate 2.4G up to 300Mbps
5G up to 900Mbps
Operating System Microso Windows 7 32/64, Windows 10 32/64
LED Link/Act
Environment Operating Temperature: 0、~40、
Storage Temperature: -10、~70、
Operating Humidity: 10%~90% non-condensing
Storage humidity: 5%~90% non-condensing

Impoed by Svive, Østre Kullerød 4,
N-3241 Sandeord, Norway
www.svivegaming.com