SVT SVT-4 User manual

SVT-4 Outdoor Station B
User Manual
Please read this user manual prior to installing the system, and keep it well for future use.

CONTENTS
1. Parts and Functions.............................................................................................. 1
2. Terminal Descriptions .......................................................................................... 2
3. Specifications....................................................................................................... 2
4. Mounting .............................................................................................................. 3
5. System Wiring and Connections ......................................................................... 4
5.1 SVT-4 System with one entrance .................................................................... 4
5.2 SVT-4 System with two entrances .................................................................. 5
6. Cable Requirements ............................................................................................ 7
7. User Instructions . ................................................................................................ 8
5.3 SVT-4 Wiring Connection .............................................................................. 6
7.1 Visitor calls ..................................................................................................... 8
7.2 Monitor ........................................................................................................... 9
7.3 Intercom ........................................................................................................ 10

-1-
1.Parts and Functions
3
# Description
1
2
LED lights
3
High resolution camera
4
Built-in speaker
5
Call button
Built-in microphone
# Description
1 Built-in microphone
2 Monitor button
3 Intercom button
4 Door unlock button
5 Talk button
6 TFT 7” color display
7 Built-in speaker
8 Talking/Ring volume
9 Brightness
10 Contrast
Status light.
Calling in: red light
Monitoring/Talking: blue light

-2-
3.Specifications
2.Terminal Descriptions
INDOOR MONITOR
OUTDOOR STATION
Voltage: DC 14.5V
NO/NC: Max. 14.5V, 120mA
Lock Power Supply: Must be used according to lock.
Unlocking time: 01s (can be adjusted when using SVT-T20G device)
Communication duration: 120s.
Communication transmission: 2-way communication
Working temperature: -4°F to 131°F / -20°C to +55°C
Working temperature: 14°F to 131°F / -10°C to 55°C
Voltage: DC 14.5V
Communication duration: 120s.
Communication transmission: 2-way communication
110 mm
100 mm
38.5mm
110mm

-3-
160-165
cm
1 2
4.Mounting
Mounting without Rain Guard:
Mounting with Rain Guard:
Hatch
Install into the wall
Screw hole
Screws
105 mm
96mm
50mm
(fix with
button case)
Screw anchors
Screws
Screws
(fix with rain cover)
Rain
cover
Wall hole

-4-
5.1. SVT-4 SYSTEM WITH ONE ENTRANCE
5.System Wiring and Connections
Outdoor
station 1
Power supply
for lock

-5-
5.2. SVT-4 SYSTEM WITH TWO ENTRANCES
Outdoor
station 1
Outdoor
station 2
Power supply
for lock
Power supply
for lock

-6-
5.3. SVT-4 WIRING CONNECTION
1. Red 2. Blue 3. Yellow 4. White
4-Video 1-Audio 2-GND 3-V+
Indoor Monitor
1. Red
2. Blue
3. Yellow
4. White
1. Red
2. Blue
3. Yellow
4. White
NOTE: Do not remove any of the jumpers from the back of the
indoor monitors.
By removing a jumper or changing its position, some of the
features may not work properly.
NC
COM
NO
Lock
To Indoor Monitor
Connect keypad/
access control/
fingerprint - J1
White
Yellow
Blue
Red
Outdoor Station

-7-
6.Cable Requirements
B
A
Cable Usage A B
CAT5 cable (must solder the wires together to ensure a good connection).
Using different cables may affect the maximum distance the system can reach.
230 feet
70 meters
30 feet
10 meters
NOTE:
1. The system expands to a maximum of 2 outdoor stations and 4 indoor monitors.
2. Each indoor monitor requires its own power supply(14.5V, 1.3A)
3. We recommend soldering the wires together to ensure a good connection (Do not use
wire nuts).

-8-
Press the call button at anytime, the
indoor monitor will show the view
from the front door camera
automatically. Press talking
button to have communication
with the visitor by the front door.
The visitor image shown on
the monitor
7.1 Visitor calls
Check
After pressing the unlocked button,
the indoor monitor still displays
the image from the front door
camera.
End the call
Talk begins
Open the lock
The talk time is
up to 2 minutes
Press the TALK
button or hang-up the
handset
The visitor presses
the call button
on outdoor
station-1
Ring Ring
The visitor presses
the call button
on outdoor
station-2
7.User instructions

-9-
All indoor monitors
ring
During the conversation
between the outdoor
station and the indoor
monitor, press button on
the main indoor monitor.
The indoor monitor press
button again to end the
conversation.
Call transferring from main indoor monitor to extension indoor
monitor
Any indoor monitor
press button or pick
up the handset to talk
with the outdoor station.
Press twicePress once
The indicator light of
Door 1 is on.
The indicator light of
Door 2 is on.
End the monitor
Press the
monitor
button
Monitor outdoor
station 1
Monitor outdoor
station 2
Press the
talk button
Press the
talk button
Monitor the
outdoor station
Press the
monitor
button
7.2 Monitor

-10-
End the call
All indoor monitors
ring
Press the TALKPress the
TALKING button or
hang-upbutton or hang-
up the handsetthe handset
Talk begins
Any indoor monitor
presses button or pick up
the handset to talk.
7.3 Intercom
In the standby mode,
press intercom
button in any
indoor monitor
During the talking, any indoor
monitor presses the intercom
button

The design and specifications of this user manual can be changed without any notification to the user.
All copyright and interpretation rights are reserved to SVT Innovations Inc.