SweetGo MONICA SG5021 User manual

SWEETGO MONICA SIDETABLE
SG5021
Thank you vey much for choosing Sweetgo items.We sincerely hope you
enjoy the item in coming days. If you encounter any questions, please
contact us freely.
Warm Prompt:
.Please ensure all parts are included in the box before assembly .Please
read all instructions carefully before assembly.
.Please follow the steps exactly as described in the manual as any deviation
from them may void your warranty or present a possible safety risk.
.If you experience any issues with the assembly or product, please contact
us through email:[email protected]
Product Care:
. Regularly check and tighten all screws and bolts as they are constantly
under pressure to extend the life and durability of the item.
. Avoid exposure to direct sunlight, heat or humidity to prevent damage to
the item.
.Our products are meant to last for years . However every piece of furniture
is unique and a little TLC can go a long way.
Questions:
If need more information, please get in touch with the Sweetgo Customer
team, available 7 days a week at [email protected].
www.sweetgo-home.com www.sweetgo-home.com

Thank you for purchasing the SWEETGO MONICA NIGHTDTAND.Please
read the instructions carefully to ensure safe operation of the product.
this sheet prior to assembly to familiarise yourself with the various stages of
construction.
Carefully open the pack supplied and check the contents against the parts and fittings check
list. Do not destroy any of the packaging until you are certain that you have all the necessary
parts for the assembly.
: There are small components used in the construction of this u nit. These loose
items should be kept away from young children whilst assembling your unit to avoid the
danger of choking hazards.
SWEETGO MONICA SIDETABLE ASSEMBLY INSTRUCTIONS
Please check the pack contents before assembling this product. If any components are missing,
please contact us.The fittings pack contains small items that should be kept away from small
children.
SWEETGO MONICA SIDETABLE ASSEMBLY INSTRUCTIONS
Page 2 of 10
www.sweetgo-home.com www.sweetgo-home.com
Page 1 of 10

SWEETGO MONICA SIDETABLE ASSEMBLY INSTRUCTIONS
SWEETGO MONICA SIDETABLE ASSEMBLY INSTRUCTIONS
Description: Table top panel
Qty: 1 PC
Size: 40x30x1.5cm
Description: Table bottom panel
Qty: 1 PC
Size: 40x30x1.5cm
Description: Table side panel
Qty: 2 PCS
Size: 30x28x1.5cm
Description: Support bar
Qty: 1 PC
Size: 36.5x5x1.5cm
Description: Table back panel
Qty: 1 PC
Size: 38x29.4x0.3cm
Description: Table leg
Qty: 4 PCS
Size: 24x3.5x3.5cm
Description: Drawer bottom
Qty: 2 PCS
Size: 35.2x26x.3cm
Description: Drawer front
Qty: 2 PCS
Size: 36.5x13.5x1.5cm
Description: Drawer left panel
Qty: 2 PCS
Size: 27x11.5x0.9cm
Description: Drawer right panel
Qty: 2 PCS
Size: 27x11.5x0.9cm
Description: Drawer back
Qty: 2 PCS
Size: 34.5x11.5x0.9cm
Page 4 of 10
Layout Parts on Soft Surface
Lay out all parts on a soft surface i.e. Rug, Carpet or Packaging Carton
CAUTION:There are many small components used in the construction of this product.
Please keep these components away from young children whilst assembling this product.
If you keep the fittings in a bowl during assembly you will be less likely to lose them!
Layout Parts on Soft Surface
①②③④
⑤ ⑥
www.sweetgo-home.com www.sweetgo-home.com
Page 3 of 10
Description: Cam
Qty: 10 PCS
Size: 15x10mm
Description: Cam bolt
Qty: 10 PCS
Size: 6x35mm
Description: Screw
Qty: 16 PCS
Size: 3x30mm
Description: Wood dowel
Qty: 10 PCS
Size: 8x30mm
Description: Screw
Qty: 2 PCS
Size: 3x12mm
Description: Block
Qty: 2 PCS

SWEETGO MONICA SIDETABLE ASSEMBLY INSTRUCTIONS SWEETGO MONICA SIDETABLE ASSEMBLY INSTRUCTIONS
Page 5 of 10
Page 6 of 10
STEP 2
STEP 1
A Table top panel
x1
B Table bottom
panel x1
Parts Required
Parts Required
Cam bolt x8
Block x1
Screw x1
C Table side panel
x2
D Support bar x1
Wood dowel x10
Block x1
Screw x1
Cam bolt x2
STEP 4
STEP 3
C Table side panel
x2
D Support bar x1
Cam x2
Parts Required
Parts Required
A Table top panel x1
Camx4
②
②
②
②
②
②
②
②
⑤
⑥
⑤
②
⑥
②
④
④
④
④
④
④
⑤
⑥④
⑤
⑥
②
①
①①
①①
①
www.sweetgo-home.com www.sweetgo-home.com

SWEETGO MONICA SIDETABLE ASSEMBLY INSTRUCTIONS SWEETGO MONICA SIDETABLE ASSEMBLY INSTRUCTIONS
Page 7 of 10
STEP 5 Parts Required
Page 8 of 10
STEP 6
B Table bottom
panel x1
E Table back
panelx1
Cam x 4
Parts Required
STEP 7 Parts Required
STEP 8
H Drawer left
panel x2
I Drawer right
panel x2
J Drawer back x2
Screws x8
Parts Required
G Drawer front x2
K Drawer bottom
x2
Screws x 8
①
①
①
①
③
③
③
③
③
③
③
③
www.sweetgo-home.com www.sweetgo-home.com
Can't be placed on
top of other sections,
it will scratch them
Warning:

SWEETGO MONICA SIDETABLE ASSEMBLY INSTRUCTIONS
Page 9 of 10
Page 10 of 10
STEP 9
Parts Required
www.sweetgo-home.com www.sweetgo-home.com
SWEETGO MONICA SIDETABLE ASSEMBLY INSTRUCTIONS
Complete Assembly
Your SWEETGO MONICA SIDETABLE is now completely assembled.
Periodically check to ensure that the components are in their proper position, free from damage.
Also, make sure the connectors are tight and secure.