Swegon Conductor W4 User manual

Instructions for Use - Conductor W4
To increase the temperature
Press1. ▲Up
until the desired
temperature is
shown.
Press OK or2.
wait 3 seconds.
To decrease the temperature
Press1. ▼Down
until the desired
temperature is
shown.
Press OK or2.
wait 3 seconds.
To increase the airflow
Press1. ►Right
until the desired
airowisshown.
Press OK or2.
wait 3 seconds.
To decrease the airflow
Press1. ◄Left
until the desired
airow is shown.
Press OK or2.
wait 3 seconds.

Instructions for Use - Conductor W4
Symbols
= Heating. = Occupancy.
= Cooling. = The CO2content has
exceeded the preset limit
value.
= Fully charged battery. AUTO = Automatic operating mode.
= Half-charged battery. ECON = Economy operating mode.
= Empty battery. STOP = Standby mode.
= Open window. EMERG = Emergency mode.
= Low airow.
= Normal airow.
= High airow.
Contact and information
Get in touch with the person responsible for the building if the indoor climate system
does not operate as it should or if the battery has run out of power.
Information about the CONDUCOR W4 and how to contact Swegon is available at
our website: www.swegon.com
Energy saving
The system includes the ECON operating mode for saving energy. It is automatically
activated when no one has been in the room for a certain period of time.
CONDUCTOR W4 returns to the AUTO operating mode as soon as someone enters
the room.