SweTrack LITE Plus User manual
Instruction Manual
Issued by SweTrack Elec ronics AB
Version 1.0 2022-05-30
www.swetrack.com 2
Introduction
Th nk you for purch sing SweTr ck Lite+ by SweTr ck.
This instruction m nu l describes how to get st rted with your new product, s
well s getting cqu inted with the product’s exterior fe tures. Ple se re d this
instructionm nu l c refully before commencing use of the product. More
inform tion c n be foundin our Online Support Center, which is ccessible t
www.swetr ck.com/support.
www.swetrack.com 3
Installing the device
onnect the device to the wiring
SweTrack Lite+ is designed to connect directly to the electrical system of your vehicle.
SweTrack Lite+ works with power systems between 9 and 90 volts. lf you are unsure how
to install the product, contact a specialist. SweTrack accepts no liability for damage to
product or property resulting from improper installation.
In the product’s box you will nd a set of wires that are used to connect the SweTrack
Lite+ device tothe vehicle’s electrical system. Connect the wires to the device using the
round plug located on thewiring and the device.
1
onnect the device to the vehicle’s power system
Connect the black cable to a negative terminal, and the red cable to a positive terminal.
The orangecable can be connected to the ignition switch of the vehicle, which allows you
to receive noticationswhen the ignition of the vehicle is turned on or off. However, using
this cable is optional and is notrequired for the product to work.
2
The device is now ready for use
When you have installed the device in your vehicle, the device is ready to start
communicating withyou. However, you need to download the app and activate a data plan
before you can begin usingthe product
3
www.swetrack.com 4
Relay
SweTrack Lite+ has the abilit to control external electrical equipment through the use of a
rela . This rela is not included with the device and has to be bought separatel in an
construction stores. You can use the rela to control power suppl toexternal devices,
such as the start motor. We strongl recommend that ou leta professional handle the
rela connection if ou choose touse it. SweTrack accepts no liabilit for damage to
product or propert resulting from improper installation. Note that improper use of the
rela can damage both product and propert . SweTrack does not take responsibilit for
damage caused b the use of the rela
To connect the rela , ou must connect the ellow cable from the product's wiring harness
to the rela 's trigger cable. Then connect the remaining cables according to the
instructions from the purchased rela .
www.swetrack.com 5
getting started with the app
Download the app
SweTrack Lite+ is controlled through the SweTrack Live app. In the SweTrack Live app,you
can see the device’s current location, enable geofences, request location history, and
more.
Visit the App Store (iOS) or Google Play (Android) and search for SweTrack Live. The app
is free.
1
Create an account
Once you’ve started the app, select Sign up found at the bottom of the login screen. Then
ll in yourname, your email address and choose a password. Finally, you need to enter the
device’s IMEI number.The easiest way to do this is to click the Scanner button and hold
the phone’s camera against the IMEIbarcode on the back of the product. You can also
select Text and enter the IMEI number manually.
Once you have lled in all elds, click the button Create Account. You then log in with your
emailaddress and the password you chose.
2
Use SweTrack Live from a computer
SweTrack Live can also be used from the browser on a PC or Mac. To visit SweTrack Live
from yourcomputer, go to in your browser. You use the same
login information on thecomputer version as in the mobile app.
www.swetrack.com/live
www.swetrack.com 6
Activating a data plan
Ho do I activate a data plan?
SweTrack Lite+ requires an active data plan for mobile data trac to work. The dataplan
includes unlimited tracking across Europe. Without mobile data, the product can not
communicate with the Internet and transfer its position data to you.
1. Go to the web app www.swetrack.com/live and log in to your account. If you do not
have an account,click on “Sign up”, follow the instructions and then log in.
2. Go to the “Data Plans” page and click on “My Cards”.
3. Click on “Add card” and then ll in your card details. Then click on the blue “Save”
button.
4. Then click on the “Devices without data plan” tab.
5. Select the device or devices for which you want to create a data plan and then click on
“Create adata plan”.
Ho do I cancel my data plan?
1. Go to the web app and log in to your account.
2. Go to the “Data Plans” page and click on “Devices with data plan”
3. Select the devices you want to cancel a data plan, and then click “Cancel data plan”
The data plan / data plans will now be cancelled and not renewed until you choose to
reactivate themby going to the tab “Devices without data plan” and clicking “Activate
data plan”.
www.swetrack.com/live
Im
portant notice
:
N
ever perform unauthori
z
ed modications to the device, such as replacing the built
-
in
SI
M-
cardwith another SI
M-
card. The device only works with the factory installed SI
M-
card.
A
lso, do not
install thebuilt
-
in SI
M-
card into other equipment, the SI
M-
card will be permanently blocked and rendered
unusable, evenif it is reinstalled in the SweTrack device.
U
nauthori
z
ed modications can damage the
product and will cause theone
-
year factory warranty to be permanently invalidated.
www.swetrack.com 7
Using the Mobile App
power saving mode
Once you have created an account and activated a subscription, the product will start to
work within about 20 minutes. You will then be able to see it on the map in the SweTrack
Live app or via a computer by going to .
The product’s position is automatically updated every 30 seconds when the product isin
motion. Keep in mind that the product is, by default, only active when the built-invibration
sensor notes movements. lf you do not see the product on the map in the app,you may
therefore need to shake it a little outside (under open sky) so that it starts up.
www.swetrack.com/live
By default, the product is set up to only search and report position data to the app when it
is in motion.However, other functions, such as mobile antennas, are turned on. This
setting is called Standard PowerSaving Mode. With this mode, you can change settings at
any time as the product is always connected to thenetwork, but it only searches for new
positions as it moves.
Edit your power saving mode
Start by rst navigating to “My Devices” that you reach by tapping the icon on the far left in
the lowernavigation menu.
Here you get a list of all the devices that you have added to your account. Select device by
tapping thearrow icon to the right of the device name. This will open the device settings.
By pressing “Power Saving Mode”, you open a pop-up with different options for Power
Saving modes.The switch that is activated will be marked blue.
Select an option by tapping the corresponding switch and then save by clicking on “Save”.
www.swetrack.com 8
warranty
Support & service
This page contains information abo t o r warranty and service terms.
Yo ’ll nd answers to the most common q estions abo t o r prod cts and services in o r
S pportCenter, located at lf yo can not nd the answer to
yo r q estion in thisman al or in the s pport center, contact o r c stomer service at
s pport@swetrack.com.
www.swetrack.com/s pport.
Privacy Policy
We at SweTrack take the integrity of o r c stomers serio sly, and we never share personal
data orinformation abo t how the prod ct is sed with any third party. Yo can nd o r
f ll privacy policy bygoing to the page .privacy policy
Hardware warranty
The prod ct is covered by a one year limited hardware warranty. F ll warranty terms can
be fo nd at . EU cons mer laws also provide a two- or three-
year legal g arantee.
www.swetrack.com/s pport
Table of contents
Other SweTrack GPS manuals
