Swing Set Stuff SSS-0035 User manual

Installation Guide
2 People Glider Swing Seat with Ropes/Chains (SSS-0035)
Part List
Tools Gloves
Finish Plan
X 4X 2X 2 X 1
Safety Glasses
4
3. Insert the
Eye Bolt of the
Rope through
the hole in the
Handle
Assembly.
4. Completed
all 4 Ropes in
the Handle
Assembly,
Make sure that
the nuts are
tightened prior
to use.
Ratchet
By accepting this product you are agreeing to Swing Set Stuff Inc.’s terms and conditions. You can review the terms and conditions at www.swingsetstuff.com/terms-conditions/
Product Instructions are provided by the manufacturer for the convenience of the customer. Swing Set Stuff Inc. does not make any representations or warranties about any product instructions that may be included
in customer’s shipment or downloaded from Swing Set Stuff Inc.’s website. Any such product instruction is made available independent of Swing Set Stuff Inc. A copy of the product instructions can be found on
www.swingsetstuff.com/product-instructions/.
1. Line up the
holes of the
Seat with the
holes of the
Handle
Assemblies.
2. Repeat the
step 1 to
complete the
other side of the
Handle
Assemblies.
1
2
X 4
3

Finish Plan
NOTE：Before connecting the S hook with the chains onto the Glider
Bracket please make sure the glider bracket is attached to the swing beam.
1. Attach chain with S
hook to the swing
hangers.
2. Use the Bender
Tool to bend the S
hook completly. All
S-hooks must be bent
fully closed.
3. Repeat the Step 1
& 2 to connect all 4
Chains into the Glider
Bracket.
Part List
Tools
SSS-0035 X 1SSS-0113-P X 1
By accepting this product you are agreeing to Swing Set Stuff Inc.’s terms and conditions. You can review the terms and conditions at www.swingsetstuff.com/terms-conditions/
Product Instructions are provided by the manufacturer for the convenience of the customer. Swing Set Stuff Inc. does not make any representations or warranties about any product instructions that may be included
in customer’s shipment or downloaded from Swing Set Stuff Inc.’s website. Any such product instruction is made available independent of Swing Set Stuff Inc. A copy of the product instructions can be found on
www.swingsetstuff.com/product-instructions/.
Assembly of Glider Swing Seat
2 People Glider Swing Seat with Ropes/Chains (SSS-0035)
bender tool
Gloves
Safety Glasses
X 4
1
2
3

Finish Plan
NOTE：Before connecting the Spring Clips with the chains onto the Glider
Bracket please make sure the glider bracket is attached to the swing beam.
1. Attach chain with
Spring Clips to the
swing hangers.
2. Repeat the Step 1
to connect all 4
Chains into the Glider
Bracket.
Part List
Tools
SSS-0035 X 1SSS-0113-P X 1
By accepting this product you are agreeing to Swing Set Stuff Inc.’s terms and conditions. You can review the terms and conditions at www.swingsetstuff.com/terms-conditions/
Product Instructions are provided by the manufacturer for the convenience of the customer. Swing Set Stuff Inc. does not make any representations or warranties about any product instructions that may be included
in customer’s shipment or downloaded from Swing Set Stuff Inc.’s website. Any such product instruction is made available independent of Swing Set Stuff Inc. A copy of the product instructions can be found on
www.swingsetstuff.com/product-instructions/.
Assembly of Glider Swing Seat
2 People Glider Swing Seat with Ropes/Chains (SSS-0035)
Gloves
Safety Glasses
X 4
1
Finish
2