SWIT Electronics S-2210D User manual

Thank you for choosing SWIT products. Please read the instructions before using, and keep it for future reference.
Features
◆ 144pcs of ultra bright LE s, 50,000hrs long life time
◆ S-2210 : Constant 5600K color temperature, Max
luminance: 700Lux@1meter;
◆ S-2210C: 3200K - 5600K continuously adjustable,
Max luminance: 350Lux@1meter;
◆ 10%-100% flick-free dimming
◆ 6V-17V wide voltage input, support -tap cable
power, standard V battery and special slim battery;
◆ Heat-free technology and constant current circuit
design ensure consistent, stable, and accurate light
output in various environments;
◆ Multiple joint the lights to use;
◆ esigned for professional ENG recording,
videography and photography.
Caution
1. Never disassemble the light or touch its inside with
metal objects to avoid damage.
2. When powering through C-IN socket, please make
sure the power supply's voltage and power meet the
light input requirements.
3. Please do take off the battery when power cable is
connected.
4. Never block the louvers; otherwise LE lighting
effect and lifetime will be greatly reduced
5. It is recommended using SWIT battery to avoid
malfunction.
6. Only use the light in the temperature range of
-10 ~40 . ℃ ℃
Specification
MODEL S-2210D S-2210C
LE 144pcs of ultra bright LE s
Luminance 700Lux/m 3200K:350Lux/m
5600K:350Lux/m
Beam angle 60°
Color
temperature
5600K with
3200K filter
3200K-5600K
continuous
Power 9W
Input voltage C 6V-17V
imension 134(W)×36(H)×81( )mm
Weight Approx.210g
Accessory Cold shoe ball head, iffuser, 3200K
filter (only S-2210 ), Portable bag
Front and rear view
Front view:
Rear view: (S-2210C)
1 2 3 4 5 6 7 8 9
Rear view: (S-2210 )
1 2 3 4 5 6 7 8
On-camera LED Light S-2210D S-2210C
USER MANUAL
SWIT Electronics Co., Ltd.
Tel:[phone]
Fax:[phone]
http://www.swit.cc
E-mail: [email protected]
1. V battery plate
(Optional purchase)
2. Color temperature
adjusting knob
3. Power check
4. Power indicators
5. Cold shoe with
1/4” thread
6. Fasten knob
7. C input socket
8. On/Off/dimmer
9. Joint slot
1. Magnet
Ver:V1.0.0V00
1. V battery plate
(Optional purchase)
2. Power check
3. Power indicators
4. Cold shoe with
1/4” thread
5. Fasten knob
6. C input socket
7. On/Off/dimmer
8. Joint slot

Usage
1. Power the light
S-2210 /S-2210C is 6-17V voltage input and
offers various power supply methods:
●
●●
● By special slim battery S-8040 (Optional
purchase)
① Make sure there’s no power lead connected
into C-IN socket and the light is switched off
(Fully anticlockwise revolve the knob to off).
② Align a fully charged S-8040 battery to the V
mount slot to same side, and press tightly in.
Slide the battery rightward to snap together.
See Fig 4
●
●●
● By various standard DV camera batteries
① Align the S-7004 series battery plate to the V mount slot to same side, and press tightly in. Then slide the
S-7004 rightward to snap together. See Fig 5
② Fix the V mount with two screws.
③ Make sure the light is switched off (Fully anticlockwise revolve the knob to off). Mount a fully charged battery to
the S-7004 mount.
Remark: Select a compatible S-7004 battery plate to match your V battery:
Model
Compatible
battery type
Recommended
SWIT battery models
S
-
7004F
SONY NP
-
F770/970
S
-
8972, S
-
8970, S
-
8770
S
-
7004P
Panasonic
54S/ 28S
S
-
8 62
S
-
7004J
JVC BN
-
V428U
S
-
8428
S
-
7004C
Canon BP
-
930/945
S
-
8945, S
-
8845
S
-
7004U
SONY
BP
-
U60/30
S
-
8U62
S
-
7004E
Canon SLR LP
-
E6
S
-
8PE6
S
-
7004B
Panasonic VW
-
VBG6
S
-
8BG6
S
-
7004V
JVC BN
-
VF823
S
-
8823
S
-
7004
I
JVC SSL
-
JVC50
S
-
8
I50
●
●●
● By DC input cable
① Support 5.5/2.1mm pole C connector and the input voltage is 6-17V; and inner: positive, Outer: negative.
② Recommend to use SWIT S-7104 ( -tap to pole cable, optional purchase) to connect camera or battery to
power the light.
③ please make sure the power supply's voltage and power meet the light input requirements.
④ Please do take off the battery when C power cable is connected.
2. Fix the LED light to the camera
① Screw the cold shoe ball head into the light
② Install the cold shoe slice onto the camera cold shoe slot to work
3. Adjust the illuminance:
Revolve the dimmer knob to adjust the illuminance from 10% to 100%
4. Adjust color temperature:
S-2210C: Revolve the color temperature adjusting knob to adjust from 3200K to 5600K continuously
S-2210 : Output 5600K light and change the color temperature to 3200K by using 3200K filter
5. Diffuser:
Apply the diffuser in front of LE s by magnet, to get soft light.
6. Check the battery remaining power capacity
When the light is turned off, press and hold the power check button to check the remaining power capacity of the
attached battery, details are as below:
●●●● 75%-100%
●●●○ 50%-75%
●●○○ 25%-50%
●○○○ less than 25%
Fig 5
S-7004
Fig 4