Syba SY-HUB50056 User manual

USB 3.0 to Gigabit Ethernet Adapter
User Manual
Ver. 1.00
All brand names and trademarks are properties of their
respective owners.

MN3000000089 Page 2
Contents:
Chapter 1: Introduction ......................................................3
1.1 Product Introduction ....................................................3
1.2 Features........................................................................3
1.3 System Requirements ..................................................4
1.4 Package Contents.........................................................4
Chapter 2: Getting Started .................................................5
2.1 Hardware Installation ..................................................5
2.2 Driver Installation........................................................5
2.2.1 Installation for Windows.......................................6
2.2.2 Installation for Mac OS X.....................................8
2.3 Hardware Verify.........................................................10
2.3.1 Verifying for Windows........................................10
2.3.2 Verifying for Mac OS X......................................11

MN3000000089 Page 3
Chapter 1: Introduction
1.1 Product Introduction
This USB 3.0 to Gigabit Ethernet Adapter add a single RJ-45 Ethernet
networking port to a USB enabled (USB 3.0) computer system with
link speeds up to 1000 Mbps. Backwards compatible with USB 2.0
computer system and 10/100 Mbps Ethernet networks, this compact
and portable adapter is ideal as a desktop replacement network adapter
or laptop accessory.
1.2 Features
Compliant with Universal Serial Bus 3.0 Specification, Revision
1.0
Compatible with USB Specification, Revision 2.0
Supports full duplex operation with IEEE 802.3x flow control
and half duplex operation with back-pressure flow control
Compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Supports IEEE 802.3az (Energy Efficient Ethernet)
Supports crossover detection and auto-correction

MN3000000089 Page 4
Supports advanced link down power saving when Ethernet cable
is unplugged
Supports Wake-on-LAN
Upstream port: USB 3.0 type A
Downstream port: RJ45
LEDs indicate the status of Power status and Ethernet connection
1.3 System Requirements
Windows® XP/7/8 (32/64 bit); Mac OS X 10.6/10.7/10.8
Available USB 2.0 port (Recommend USB 3.0 port)
1.4 Package Contents
1 x USB 3.0 to Gigabit Ethernet Adapter
1 x Driver CD
1 x User Manual
Note: Contents may vary depending on country/market.

MN3000000089 Page 5
Chapter 2: Getting Started
2.1 Hardware Installation
1. Plug the USB 3.0 to Gigabit Ethernet Adapter directly into an
available USB 2.0 port (Recommend USB 3.0 port) on your
computer.
2. Connect one end of your network cable into the RJ45 port of USB
3.0 to Gigabit Ethernet Adapter.
3. Connect the other end of the network cable into an available
Ethernet port on your router, switch, or any other networking
device.
2.2 Driver Installation
The following section shows you how to install the USB 3.0 to Gigabit
Ethernet Adapter driver on different operating systems.
Important! Do not connect the USB 3.0 to Fast Ethernet to your PC
before the install.

MN3000000089 Page 6
2.2.1 Installation for Windows
1. Insert the provided CD into your disk drive. The CD-ROM will
start automatically. The following screen will show up and please
click “Install Driver”.
*Note: Actual image may vary
Note: If the install program doesn’t run automatically, please
locate and double-click on the Autorun.exe file in the CD to
launch the install program.
2. Please click “USB 1000M”.

MN3000000089 Page 7
*Note: Actual image may vary
3. Please click “USB 3.0 1000M”to start the installation.
*Note: Actual image may vary
4. Follow the instructions on screen to install the driver.

MN3000000089 Page 8
2.2.2 Installation for Mac OS X
1. Insert the provided CD into your CD-ROM drive.
2. Double-click the “Ethernet Adapter” disc icon, double-click
“Drivers” folder.
*Note: Actual image may vary
3. Double-click “USB 1000M” folder, and then double click the
“USB 3.0 1000M” folder, then click “For Mac OS X
10.6/10.7/10.8” file to launch the installer.

MN3000000089 Page 9
*Note: Actual image may vary
4. Follow the instructions on screen to install the driver. After driver
installation is complete, you must restart your computer.

MN3000000089 Page 10
2.3 Hardware Verify
2.3.1 Verifying for Windows
1. Click on the “Device Manager” tab in the Windows Control
Panel.
Start > Control Panel > Device Manager
2. Entry “Network adapters”item, and you can read “ASIX
AX88179 USB 3.0 to Gigabit Ethernet Adapter”in the Device
Manager.

MN3000000089 Page 11
2.3.2 Verifying for Mac OS X
1. Choose About this Mac from the Apple menu.
2. Click on More Info…
3. In the Contents sidebar select USB from the Hardware section.
4. Scroll the list to reveal the USB 3.0 to Gigabit Ethernet Adapter
information