Syba CL-ADA24021 User manual

802.11N WIRELESS USB ADAPTER
INSTALLATION GUIDE
Package Contents
Before you starting to use this wireless network card, please check if there’s anything missing in the
package, and contact your dealer of purchase to claim for missing items:
□USB Wireless Network Card (1 pcs)
□Quick Installation Guide (1 pcs)
□Driver/Utility/User Manual CD-ROM (1 pcs)
For further details, please refer to complete manual on CD.
WPS setting
WPS (Wifi Protected Setup) enables to have an automatic and secure WIFI connection to let you
connect to Wireless network without additional setting, nor password setting.
It can run only with router or modem equipped with WPS button no matter what trademark is.
The setting is simple and easy:
-After creating wireless secure network on your box/router/modem-router (consult the device manual),
go to WPS function.
-Press down the WPS button of the wireless USB device.
-The 2 devices will automatically synchronize instantly: you just have to wait.
-You will be automatically connected to your secure wireless network.

Network Card Installation
Please follow the following instructions to install your new USB wireless network card.
1. Insert the USB wireless
network card into an empty
USB 2.0 port of your
computer when computer is
switched on.
Never use force to insert the
card, if you feel it’s stuck, flip
the card over and try again.
2. The following message will
appear on your computer,
click ‘Cancel’.
3. Insert device driver
CDROM into the CD/DVD
ROM drive of your computer,
and execute ‘Setup.exe’
program. Please select
Setup Language and then
click ‘Next’ to continue.

4. Click “Next” to go to next
step.
5. Now you’ll see the
following message, please
click ‘Install’ to begin the
installation.
Please wait while the
installation procedure is
running.
6. The installation is
completed, please click
‘Finish’.

Connect to Wireless Access Point
Using Configuration Utility to Connect to Wireless Access Point:
1. After installation is complete,
wireless configuration utility will
be shown in the desktop of your
computer automatically. You will
also see an icon at the lower-right
corner of your windows system.
You can click the icon by right
mouse key, and select the
configuration utility.
2. Configuration utility will scan for
wireless access points and
access to any unencrypted
wireless access point
automatically. If you wish to
connect to another access point,
select the access point and
double click it.
If the wireless access point you
want to connect does not show
here, please click ‘Rescan’.
3. If the wireless access point
uses encryption, you have to input
WEP key or WPA preshared key.
Please ask the owner of the
wireless access point you want to
connect and input the correct key
here, and then click ‘OK’. If the
value you inputted here is wrong,
you will not be able to connect to
wireless access point.

4. If the wireless access point is
successfully connected, you’ll see
a symbol appears in
front of the name of wireless
device.
5. The primary goal of Wi-Fi
Protected Setup (Wi-Fi Simple
Configuration) is to simplify the
security setup and management
of Wi-Fi networks. This adapter
supports the configuration setup
using PIN configuration method.
Click Pin Input Config and enter
PIN code.
For advanced settings and other features of this USB wireless network card, please refer to user
manual enclosed in supplied CD-ROM.
This product is in compliance with the essential requirements of the European Directives for which it is
concerned.
You can download declaration of conformity on the website: http:// www.connectland.eu
Copyright © 2011. CONNECTLAND. All right reserved.