Sycreader R58B User manual

Shenzhen Sycreader RFID Technology Co., Ltd
13.56MHZ Bluetooth RFID Reader
1D 2D Bluetooth Barcode
Scanner
Manual
Model：R58B/R58D/R58C
Revise Date：2019-9-4

Shenzhen Sycreader RFID Technology Co., Ltd
R58B is 13.56M/125Khz non-contact RF card reader and 1D/2D barcode scanner based on barcode
recognition, RFID radio frequency identification technology and Bluetooth communication. Low power
consumption, up to 1 year long standby time, no need traditional wired date transmission, also no need
additional power supply (built-in Li-battery), just need Bluetooth pairing between receiving device and
reader, then it will transmit the UID of RFID card to devices directly.
1 Specifications
Item
Specifications
Pictures
Model
R58B/R58C/R58D
Frequency
125KHZ/13.56MHz
Card Type
S50/S70/Ntag203/Ntag213
Decode
Capability:
1D: UPC-A, UPC-E, EAN-8, EAN-13, Code 128, Code
39, Code 93, Code 11, Interleaved 2 of 5, Matrix 2 of
5, China post etc.
2D: QR Code, Data Matrix, etc
Communication
Bluetooth/2.4G
Format
Default 8-bit hex system (format customizable, like 10-bit 10
system/10-bit hex system etc)
Distance
20mm-60mm（depend on card type）
Reading Rate
106K/Bit
Reading Speed
0.1S
Reading Interval
0.5S
Reading Time
＜100mS
Working
Temperature
-20℃—70℃
Working Current
100mA
Charge Voltage
5V
Dimensions
（product）/142mm×90mm×61mm（package）
Weight
50G（product）/150G（package）
Operating
System
IOS, Win 7\Win 10\Android, etc
Others
Status indicator: 4-colors LED (white :connection status,
red :scan confirmation, blue: indicator, green:power
Built-in buzzer
2 Features

Shenzhen Sycreader RFID Technology Co., Ltd
⚫No need password, easy pairing.
⚫Long distance transmission, stable 10 meters.
⚫Long standby time, when fully charged. (8 hours charging, 1 year standby).
⚫Fast transmission, plug and play.
⚫Easy charging with phone charger.
⚫Default Enter when date output, no need manual click.
⚫Widely used for Windows, IOS, Android and other Bluetooth enabled devices.
3 Using Method (IOS for example)
1, Enable Bluetooth of phone or other devices (Pic1)
Pic1
2, Press blue button on reader for 1-2s, the first light on the left of the reader blinks, then “SYC
Bluetooth” (Bluetooth name of reader) will show in searching list (Pic3)
Pic2
Pic3
3, Choose “SYC Bluetooth”, if shows “connected”, then Bluetooth connection done, and into
standby for card reading (Pic4).
4, Open document of phone (like Word, notepad, Notes, Excel, etc), place card on RFID reading
Pic1
Pic2
Pic3
Pic4

Shenzhen Sycreader RFID Technology Co., Ltd
area or scan the 1D/2D barcode , then it will output date automatically (Pic5).
4 Notes
⚫This reader is only suitable for 13.56MHz IC card, not for Bluetooth card (2.4GHz)
⚫When reading card data, please adjust system language to English of phone or other device, so as
to output date more completely.
⚫For correct reading, recommend to move card to reader front panel normally, not fast sliding at
side panel which may fail to read.
⚫Attached cable not for data communication, only for reader charging.
⚫Real reading distance may differ due to many affecting factors, like different protocols, different
aerial design, different environment nearby (mainly metals), different cards, etc.
⚫Built-in sleep system. When reader not used, into auto sleep after 60 seconds, if need restarting,
press button for 1-2 seconds, reader will be back to working state.
5 Pictures
Pic5