Symmons Museo 5303 Manual

Museo®
Model Numbers Specification
Options/Modifications
5303
Hand shower system powered by the Temptrol®pressure
balancing valve. Features adjustable stop screw to limit
handle turn, lever handle, wall connection & cradle,
exible metal hose, 2 mode hand shower with backow
prevention and standard 2.5 gpm (9.5 L/min) ow
restrictor.
5305
Shower/hand shower system powered by the Temptrol®
pressure-balancing valve. Features adjustable stop screw
to limit handle turn, separate two function diverter, lever
handle, wall connection & cradle, exible metal hose,
2 mode hand shower with backow prevention, 1 mode
showerhead and standard 2.5 gpm (9.5 L/min) ow
restrictors.
5306
Tub/shower/hand shower system powered by
the Temptrol®pressure balancing valve. Features
adjustable stop screw to limit handle turn, separate
three function diverter, lever handle, wall connection &
cradle, exible metal hose, 2 mode hand shower with
backow prevention, non-diverter tub spout and 1 mode
showerhead with standard 2.5 gpm (9.5 L/min) ow
restrictors.
Components made from metal and nonmetallic materials
plated in standard polished chrome nish.
5303
Hand Shower System
5305
Shower/Hand Shower System
5306
Tub/Shower/Hand Shower System
Compliance
-ASME A112.18.1/CSA B125.1
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
5303, 5305, 5306
Shower System Series
Operation & Maintenance Manual
-1.5 1.5 gpm (5.7 L/min) flow restrictor
-2.0 2.0 gpm (7.6 L/min) flow restrictor
-BLK Polished Graphite finish
-STN Satin Nickel finish
-TRM Trim only, valve not included
CG
Note: Append appropriate -sufx to model number.

2
Dimensions
Notes:
1) All dimensions measured from nominal rough-in (see R as reference).
2) Dimensions subject to change without notice.
Measurements
A Ø 2", 51 mm
B 11-1/8", 283 mm
C Ø 2", 51 mm
D
Male 1/2" IPS thread
must protrude 3/8"
from nished wall
E 6", 152 mm
F 77", 1956 mm
G Ø 6-1/4", 159 mm
H Ø 5", 127 mm
I Ref. 10", 254 mm
J 3-1/2", 89 mm
K Ø 2-1/4", 57 mm
L Ref. 32", 813 mm
M Ref. 12", 305 mm
N 3-1/4", 83 mm
O 3-3/4", 95 mm
P 1/2" - 14 NPT
Q 1/2", 13 mm
R(Rough in)
2-3/8" ± 1/2", 60 mm ± 13 mm
S 7-1/8", 181 mm
CC
A
H
H
G
G
K
K
L
L
M
M
F
F
B
B
D
D
J
J
I
I
N
N
O
O
R
R
S
S
Q
Q
P
P
E
E
Floor
Floor

3
Parts Breakdown
Replacement Parts
Item Description Part Number
A Wall Cradle T-673
B Shower Arm 532SA
C Showerhead 532SH
D
E
F
G
H
Plug Button
Star Washer
Handle Insert
Set Screw
Diverter Handle
T-667
I
E
F
G
J
Plug Button
Star Washer
Handle Insert
Set Screw
Shower Handle
T-665
K Dome Cover T-666
L
M
N
Escutcheon
Mounting Screws
Mounting Plate
LLD-103-NS-KIT
O
P
Q
Escutcheon
Mounting Screws
Mounting Plate
T-668-NS-K001
R Hand Shower 402W
S Tub Spout 532TS
T 60" Hose EF-02976
Notes:
1) Append -STN to part number for
Satin Nickel nish.
2) Append -BLK to part number for
Polished Graphite nish.
3) Append -1.5 or -2.0 to showerhead
or hand shower for low ow.
A
R
T
C
K
B
F
D
E
G
N
Q
L
O
S
M
P
H
K
F
I
G
J
E
Tools Required for Installation
Adjustable
wrench
Phillips head
screwdriver
Plumber tape
Silicone
Notes:
1) Apply a bead of silicone around the perimeter of all shower trim
installed ush to the nished wall (less mounting plates and
brackets). Leave opening on bottom of escutcheons for weep hole.
2) Apply plumber tape to threaded connections as necessary.
DO NOT use plumber tape on ttings with face seal washers or
o-rings.
3) DO NOT OVERTIGHTEN ttings with face seal washers or o-rings.

4
Installation
Note:
For valve body installation, please
see valve body installation guides.
1) Install small mounting plate (N)
to diverter valve (2DIV-BODY or
3DIV-BODY) and large mounting
plate (Q) to shower valve (4000-
BODY). Secure each with two
screws (M) and (P).
2) Attach diverter escutcheon (L) to
small mounting plate (N).
Note: Tabs should snap into place.
3) Attach shower escutcheon (O) to
large mounting plate (Q).
Note: Tabs should snap into place.
4) Install dome covers (K) to valves by
turning clockwise.
5) Place handle insert (F) into handle
(H/J). Install diverter handle (H)
(5305 and 5306 only) and shower
handle (J) to valves.
Note: Handles should be facing the
6 o'clock position.
6) Secure handle(s) to valves using
star washer (E) and set screw (G).
Attach plug button (D) to handle(s).
1
M
N
Q
P
1
2
L
N
O
Q
1
1
K
K
2
2
2
H
J
1
H/J
F
1
1
2
3
G
E
D

5
Installation/Operation
7) I nstall tub spout (S) to pipe
tting. Turn clockwise to secure.
8) I nstall wall cradle (A) to pipe
tting. Turn clockwise to tighten.
9) Attach shower arm (B) to vertical
shower pipe. Turn clockwise to
tighten.
10) I nstall showerhead (C) to shower
arm (B). Turn clockwise to tighten.
11) Attach large end of hand shower
hose (T) to hand shower wand
(R). Attach small end of hand
shower hose to wall elbow (A).
Turn clockwise to tighten.
Temperature Adjustment:
1) Turn shower handle
counterclockwise approximately
1/4 turn to put valve in cold
position.
2) Turn shower handle
counterclockwise approximately
1/2 turn to put valve in warm
position.
3) Turn shower handle
counterclockwise approximately
3/4 turn to put valve in hot
position.
1
S
2
1
A
2
1
C
B
2
1
2
B
A
3
1
4
R
T
T
2

Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: [phone] ■ Fax: [phone]
Copyright © 2018 Symmons Industries, Inc. ■symmons.com ■[email protected] ■ZV-3067 REV 0 ■ 080118
Troubleshooting Chart
Finish is spotting. Elements in water supply may cause
water staining on nish.
Clean nished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then quickly
rinse with water.
Operation (Diverter Control: 2DIV-BODY)
POSITION 1 POSITION 2
1) Cartridge is factory set to divert
to function 1.
2) Turn handle to position 2 to divert
to function 2.
3) Turn handle to position 3 to share
functions 1 and 2.
POSITION 3
Note: Additional handle positions for same output are illustrated.
Operation (Diverter Control: 3DIV-BODY)
1) Cartridge is factory set to divert
to function 1.
POSITION 2
2) Turn handle to position 2 to divert
to function 2.
POSITION 1 POSITION 3
POSITION 6
3) Turn handle to position 3 to divert
to function 3.
6) Turn handle to position 6 to share
functions 1 and 2.
Troubleshooting Chart
5) Turn handle to position 5 to share
functions 1 and 3.
POSITION 5
POSITION 4
4) Turn handle to position 4 to share
functions 2 and 3.
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to
cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.