Symmons Lig-Res Diverter Valve Trim User manual

Disclaimers
■ Product is designed to reduce
likelihood that unit can be used
as a device for hanging.
■ Product is not a substitute for
the evaluation, treatment or
appropriate supervision of
persons at risk of suicide.
Diverter escutcheon kit
RTS-030
Knob kit
RTS-029
Note: Valve, piping, and ttings are not included. Actual plumbing
should be determined and installed by a licensed plumber.
5/32" ligature resistant
hex wrench included
Dome cover Escutcheon
Finished wall
Visual Installation Guide Lig-Res Diverter Valve Trim, 57-458-TRM
Need Help?
Symmons customer service:
( 800) 796-6667, [phone]
[email protected]
Mon - Fri 7:30 am - 7:00 pm EST

www.symmons.com/service
• Technical help
• Product information
• Warranty policy
Model Number
57-458-TRM . Diverter Valve Trim
(diverter valve not included)
5/32" hex wrench included
Tools & Materials
Lig-Res™
Clean nished area using mild soap
or a non-abrasive cleaner and then
quickly rinse with water. A non-
abrasive wax may be used to preserve
nish area.
Care and cleaning
Installation Brief
Diverter Valve Trim 57-458-TRM
Ligature resistant

Symmons Industries, Inc. ■ 31 Brooks Drive ■Braintree, MA 02184 ■[phone], [phone] ■ Fax: [phone]
©2012 Symmons Industries, Inc. ■Printed in U.S.A. ■www.symmons.com ■[email protected] ZV-1086 ■080412
Notes:
(1) Dimensions identied with an asterisk (*) apply when diverter valve is installed
without primary mixing control valve.
When diverter valve is coupled with a primary mixing control valve, then dimen-
sion is determined by rough-in drawing provided with mixing control valve.
(2) Dimensions subject to change without notice
5-5/8" dia
(143 mm)
2-1/2" (64 mm) min*
3-5/8" (92 mm) max*
Hole size
3" (76 mm) min
3-1/2" (89 mm) max
1-1/4" (32 mm)
Diverter valve
(dual port)
nished wall
2-3/4" (70 mm) min*
3-7/8" (98 mm) max*
4-1/4" (108 mm) min*
5-3/8" (137 mm) max*
Dimensions Lig-Res Diverter Valve Trim, 57-458-TRM