Syride SYS'Nav User manual

28
syride
®
SYS’Nav
EN
Guide d’utilisation : p1
User guide : p28
Manual de usuario : p56
Benutzerhandbuch : p84

29
Foreword
Welcome in the community of Syriders! Your SYS'NAV is an extra light instrument with the
most recent technologies, which will able you to improve yourself and guide your improvements. You
will also be able to build a unique and highly detailed online flight book. Your practice of paragliding is
going to take a new dimension with the SYS'NAV!
As a member of the community, you will become to a key pilot in the evolution and
continuous improvement. The range of innovative sensors included in the SYS'NAV allows the
development of future features. We encourage you to share your suggestions for your greater
satisfaction.
Syride whishes you beautiful flights.

30
I. Setup the SYS PC Tool ...................................................................31
II. Place the instrument .................................................................... 32
III. Recharging the battery ................................................................. 33
IV. Information about GPS state.........................................................34
V. Menu synoptic ............................................................................. 35
VI. Flight screens ...............................................................................36
VII. Configure your device...................................................................38
VIII. Advanced configuration................................................................40
IX. Customize your screens and vario sound.......................................41
X. Height above ground .................................................................... 42
XI. Locate airspaces ........................................................................... 43
XII. Navigation....................................................................................45
XIII. Display and delete a flight.............................................................47
XIV. Warnings and reset ......................................................................48
XV. Transfer your flights .....................................................................49
XVI. Parameters .................................................................................. 52
XVII. Suggestion of use ......................................................................... 53

31
I. Setup the SYS PC Tool
1. Download the lastest version of the
SYS PC Tool by checking the following
webpage :
http://www.syride.com/en/logiciel
2. Follow the instructions to install it on
your computer.
3. Once installed, an icon shows in the
task bar. It detects when your
instrument is connected.
4. The software will automatically start
with your operating system.
10:39

32
II. Place the instrument
1. Syride suggests to place your
instrument on the risers. 2 velcros
ables you to place it on any existing
riser. Take care not to « lock » your
rope or pulley accelerator.This position
ables you to manipulate the instrument
while flying without releasing the
brakes.
We recommend you to insert a
protection between the velcro and
your riser in order to avoid the
abrasion of it.
2. Velcros also allow placing the
instrument on a cockpit,on thigh, (with
extension) or on the wrist.
3. You can secure your instrument by
using the strap provided for this
purpose.
EN

33
III. Recharging the battery
1. Simply connect your instrument with
the USB cable to a computer. A red led
shows the right loading of the device.
2. Your instrument will display
“Charging…” and the percentage of
charge. To complete, a charge it
requires 2 hours.
3. Disconnect USB to stop the charge.
Your instrument has a Li-ion battery,
which has no memory effect.
4. When your instrument will start the
battery icon needs 10 seconds to be
stable.
Charging…
54%

34
IV. Information about GPS state
The GPS fix after a long period of inactivity, or after an important change in geographical
position, can take up to 10 minutes. It is recommended to be outdoor to ease the first
GPS adjustment. We suggest you to turn ON your instrument a few minutes before
taking-off.
1. GPS state is shown with the bargraph
on the top center of the screen :
Blinking = GPS not ready
Low level signal
Medium level signal
High level signal
Optimum level signal
A number indicates the number of synchronized satellites 6 .
2. The plane icon on the top left of the screen
indicates that your SYS’NAV is recording your
flight. The vario automatically detects when
you’re flying.
EN
SYS’Nav

35
V. Menu synoptic
1
Flight
screen
2
Flight
screen
3
Flight
screen
4
Flight
screen
5
MAP
screen
6
Backup
screen
7
Navigation
menu
8
Flights
menu
9
Setup
menu
1
Load
route
2
Create
route
3
Delete
route
4
Create
waypoint
5
Delete
waypoint
See « VI. Flight screens »
See « XII. Navigation »
See « XIII.
Display and
delete a
flight »
4
Thermal
sniffer
1
Volume
screen
2
Threshold
screen ↑
3
Threshold
screen ↓
5
Backlight
screen
See « VII. Configure your device »
0
Goto
0
Info
screen
6
Airspace
screen
7
Altitude
screen

36
VI. Flight screens
1. Screens #1 to #4 shows the
informations you previously choosed.
If your device do not receive a GPS
signal strong enough, NO GPS will
appear.
2. Pressing the central button will turn
OFF and ON the sound of the vario.
This is usefull when you need to
concentrate on a transition or when
landing.
3. Press the central button on the screen
#6 in order to save your current GPS
position. The result will show you the
distance, the vertical gain from that
point and a route indication to return to
this saved position.
3
6
6
EN

37
4. Screen #5 (MAP screen) displays on the whole LCD area. You can see :
•Your current position and heading on the middle of the screen
•The topography grayscaled (if previously uploaded to the instrument)
•Airspaces (if previously uploaded to the instrument)
•Your GPS trace for the last 10 minutes
•Waypoints and optimized navigation route (if a route is loaded)
Pressing the middle button changes the zoom level.
The North is on the upper side of the map.