SystemBase MultiPort USB User manual

MultiPort USB
User Manual
Version 2.9
2012. 04. 10

Revision History
Revision Date
Version
Pages
Description
14/07/2006
2.0
All
Renewal by shlee
02/08/2008
2.1
Partial
Vista added by khheo
13/05/2009
2.2
Partial
Modified by hjnoh
26/05/2009
2.3
Partial
Modified by hjnoh
26/10/2009
2.4
Partial
Modified by ymwon
06/02/2010
2.5
Partial
Modified by ghpark
18/10/2010
2.6
Partial
Modified by Louis Kim
16/11/2010
2.7
Partial
Modified by hsjung
19/07/2011
2.8
Partial
Modified by ymwon
10/04/2012
2.9
All
Renewal by ymwon
Copyright 2006 SystemBase Co., Ltd. All rights reserved.
Website: http://www.sysbas.com/
Tel: 82-2-855-0501 Fax: 82-2-855-0580
16th Fl. Daerung Post Tower-1, 212-8, Guro-dong, Guro-gu, Seoul, Korea
For any inquiries or comments, contact tech@sysbas.com

Contents
What is USB MultiPort?................................................................................................................. 5
Multiport USB Specifications.........................................................................................................6
Connectivity Method...................................................................................................................... 7
RS232 ....................................................................................................................................7
RS422 ....................................................................................................................................8
RS485 ..................................................................................................................................10
Termination Resistor.................................................................................................................... 11
Multi-1/USB Ver4.0......................................................................................................................13
- Specification.......................................................................................................................13
1. RS232 Model ...................................................................................................................14
2. RS422, RS485 Model ......................................................................................................14
Multi-2/USB Ver4.0......................................................................................................................18
- Specification.......................................................................................................................18
1. RS232 Model ...................................................................................................................19
2. RS422, RS485 Model ......................................................................................................19
Multi-4/USB Ver4.0......................................................................................................................23
- Specification.......................................................................................................................23
1. RS232 Model ...................................................................................................................24
2. RS422, RS485 Model ......................................................................................................24
Multi-4U Ver1.7............................................................................................................................28
- Specification.......................................................................................................................28
1. RS232 Model ...................................................................................................................29
2. RS422, RS485 Model ......................................................................................................29
Multi-8U Ver1.7............................................................................................................................35
- Specification.......................................................................................................................35
1. RS232 Model ...................................................................................................................36
2. RS422/RS485 Model .......................................................................................................36
Multi-4U/8U under V1.5...............................................................................................................42
1. RS232 Model ...................................................................................................................42
2. RS422, RS485 Model ......................................................................................................43
Multi-4U/8U V1.5 and V1.6..........................................................................................................44
1. RS232 Model ...................................................................................................................44
2. Combo (RS422/RS485) Model ........................................................................................45

Installing Windows 98 Device Driver...........................................................................................49
Installing Windows 2000/XP/2003 Device Driver........................................................................51
Installing Window Vista/2008 Device Driver................................................................................54
Installing Window 7 Device Driver...............................................................................................57
Automatic Driver Installation in Windows....................................................................................61
Windows Device Driver Setup.....................................................................................................63
Removing Windows 98/2000/XP/2003 Driver.............................................................................66
Removing Windows Vista/2008/7 Driver.....................................................................................70
Multi-4U/8U Version History ........................................................................................................75

What is USB MultiPort?
USB is a complex word of “Universal”, meaning all peripheral devices use the same connector,
and “Serial”, meaning devices are connected as a daisy chain through serial transmission. USB
is an interface suggesting a solution to inconvenience and inefficiency caused by slow speed
and limited device connection of existing external ports(serial or parallel). Compared to external
ports that were only used to connect devices such as modems, printers and scanners, USB is
powerful in that it connects all types of basic peripheral devices that were each connected via
different types. Also, when a new device is plugged, it’s auto-detected without any rebooting or
setup process, enabling 127 connections maximum. Installation is handy since PnP is perfectly
supported. No extra equipment is needed since most of the main-board chipsets include the
USB controller.
USB cable type supported is type A, which can utilize the USB port of the PC or the USB hub.
This product obtains power from USB, and this makes the product powerful since no external
power supply is required.

Multiport USB Specifications
- Hardware
Number of Ports: 1, 2, 4, 8
USB Interface: USB Spec 1.1/2.0
Serial Interface: RS232/COMBO(422/485)
LED: Tx and Rx per each port
Serial Connector: DB9 (Male) 1,2,4/ DB9 (Female) 4,8 Panel type
Serial Communication Speed: 921.6Kbps maximum
External Power: Selectable/Disable(*1)
- Software
Supports Windows 98/2000/XP/2003/Vista/2008/7, and Linux Driver (*2)
Supports Windows XP/2003/Vista/2008/7 x64
*1: You can connect external power supply to Panel type USB MultiPort H/W ver. 1.5 or above
only.
*2: If you would like to use USB Multiport for Linux, please contact tech@sysbas.com
Multiport USB Specifications

Connectivity Method
Connectivity Method
RS232
How to connect to a Terminal
DCD
DSR
RXD
RTS
TXD
CTS
DTR
RI
GND
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
DCD
DSR
RXD
RTS
TXD
CTS
DTR
RI
GND
PC Terminal
How to connect to a Modem
DCD
DSR
RXD
RTS
TXD
CTS
DTR
RI
GND
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
DCD
DSR
RXD
RTS
TXD
CTS
DTR
RI
GND
PC Modem

Connectivity Method
RS422
Point-to-Point Mode Connection
PC
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
RX+
RX-
TX+
TX-
RX+
RX-
TX+
TX-
Multi-Drop Mode Connection
PC
Device 1
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
RX+
RX-
TX+
TX-
RX+
RX-
TX+
TX-
Device 2
1
2
3
4
5
6
7
8
9
RX+
RX-
TX+
TX-
※Please check your device Pin Spec

Connectivity Method

Connectivity Method
RS485
Connectivity Method
1
2
3
4
5
6
7
8
9
TRX+
TRX-
1
2
3
4
5
6
7
8
9
TRX+
TRX-
1
2
3
4
5
6
7
8
9
TRX+
TRX-
PC
Device 1
1
2
3
4
5
6
7
8
9
Device 2
1
2
3
4
5
6
7
8
9

Termination Resistor
Termination Resistor
What is Termination Resistor?
Termination Resistor purpose to reduce of reflection wave in network. We use 120 Ωresistor
in RS422/RS485 communication.
Installation
RS422 Mode
PC
Device 1
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
RX+
RX-
TX+
TX-
RX+
RX-
TX+
TX-
Device 2
1
2
3
4
5
6
7
8
9
RX+
RX-
TX+
TX-

Termination Resistor
RS485 Mode
PC
Device 1
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
TRX+
TRX-
TRX+
TRX-
Device 2
1
2
3
4
5
6
7
8
9
TRX+
TRX-

Multi-1/USB Ver4.0
Multi-1/USB Ver4.0
Multi-1/USB Ver4.0 is a model that supports USB1.1 and USB 2.0. It is detected automatically
when user connects USB port with computer. It supports maximum communication speed of
921.6Kbps. Furthermore, it is equipped with surge protector to protect internal systems from
outer shock.
In Combo Model, user can set line interface, communication mode and terminal resistor.
Also, the LED is attached outside to show the current status of signal lines.
- Specification
Communication Speed
Max 921.6Kbps
Bus Interface
USB 2.0 (Full Speed)
Line Interface
RS232/RS422/RS485
Controller
FTDI 223R
Connector
DB9 Male
Protection
15kV Surge Protector
O/S
Windows 98/2000/XP/2003/Vista/2008/7, Linux
Manufaturer
SystemBase Co., Ltd

Multi-1/USB Ver4.0
1. RS232 Model
- DB9 Male Pin Assignment
2. RS422, RS485 Model
- DB9 Male Pin Assignment

Multi-1/USB Ver4.0
- DIP Switch Setting
ON
OFF
1
Interface Select
RS485
RS422
2
Echo/Non-Echo Select
Echo
Non-Echo
3
RS422 terminal resistor
Install
Uninstall
4
RS485 terminal resistor
Install
Uninstall

Multi-1/USB Ver4.0
- Jumper Setting
①Loosen the two screw on the bottom case.
②Remove the side cap.
Look at the rear side of case, you can find the small grooved.
③Top cover is slid to the inside of the case.

Multi-1/USB Ver4.0
10M: Not use Slew Rate Limit ability. Maximum communication speed
921.6Kbps in this mode.
250K: Use Slew Rate Limit ability. Communication speed is limited under
250Kbps.
Slew Rate Limit allows communication without errors by activating slew-rate driver to reduce
reflection waves and EMI electromagnetic waves. However, communication speed is limited
when it is used.

Multi-2/USB Ver4.0
Multi-2/USB Ver4.0
Multi-2/USB Ver4.0 is a model that supports USB2.0. It is detected automatically when user
connects USB port with computer. It supports maximum communication speed of 921.6Kbps.
Furthermore, it is equipped with surge protector to protect internal systems from outer shock.
In Combo Model, user can set line interface, communication mode and terminal resistor.
Also, the LED is attached outside to show the current status of signal lines.
- Specification
Communication Speed
Max 921.6Kbps
Bus Interface
USB 2.0
Line Interface
RS232/RS422/RS485
Controller
FTDI 2232H
Connector
DB9 Male
Protection
15kV Surge Protector
O/S
Windows XP/2003/Vista/2008/7, Linux
Manufaturer
SystemBase Co., Ltd

Multi-2/USB Ver4.0
1. RS232 Model
- DB9 Male Pin Assignment
2. RS422, RS485 Model
- DB9 Male Pin Assignment

Multi-2/USB Ver4.0
- DIP Switch Setting
ON
OFF
1
Interface Select
RS485
RS422
2
Echo/Non-Echo Select
Echo
Non-Echo
3
RS422 terminal resistor
Install
Uninstall
4
RS485 terminal resistor
Install
Uninstall
This manual suits for next models
2
Table of contents
Other SystemBase Adapter manuals