How to put away your T3 Tournament Table
1) Remove net one half at a time by sliding off.
) Separate table halves. Lift up table top on one
side until vertical and x yellow locks click into
locked position. Remove wheels locks and wheel
away.
3) Repeat with other half.
4) Store net carefully in safe place. Avoid bashing,
dropping or place/leaning sharp items against
your net.
How to set up Playback Position
1) Remove both halves of the net.
) Separate table halves. Lift up one half of
table until vertical and x yellow locks
click into locked position.
3) GENTLY wheel vertical table half against
open half of table. When in place lock
wheels in position.
Safety Instructions are clearly featured on the back of the table
PLEASE READ BEFORE SETTING UP TABLE
Please read the ‘Care Instructions’ detailed in the
‘How to Get the best from your T3 Table’
www.t3pingpong.com
How to set up your T3 Tournament Table
1) Release wheel locks if secured by lifting lever.
Wheel each half into playing area.
Following the instructions detailed on the back of each
table, start by releasing the yellow table locks via the
ring pulls.
) Using both hands, pull the red cords upward
simultaneously to release both yellow locks.
Pull the table top down gently until the
legs meet the ground.
Lock wheels once in place.
3) Repeat with other half. Pushing the two halves together so the dowels and
magnetic dots meet.
4) Lock wheels in place by pressing down on lever.
5) Net – Slide each half of the net into place once again until dowels and
magnetic dots meet
If Table W eels ave been removed
•If the table wheels have been removed
from the table in transit, make sure that
when they are reattached to the table top
they are t e rig t way round.
•Match up the red dots or arrows or paint
marks on the leg to the wheel arm
