TAG PA-223A-140 User manual

Route de Lavérune
Montée du Terral
34430 Saint Jean de Védas
FRANCE
Tel : [phone]
Fax : [phone]
[e-mail]
www.tag-fr.com
Techniques Audio Groupe
USER’S MANUAL
A-140
MIN MAX
Mic 1
MIN MAX
Mic 2
MIN MAX
Line 1
MIN MAX
Line 2
MIN MAX
Bass
MIN MAX
Mid
MIN MAX
Hi
MIN MAX
Master L
MIN MAX
Master R
On / Off
PA-223S
Option Lecteur CD
ou Lecteur / Enregistreur USB/SD
Option Récepteur HF
ou Emetteur HF
AC IN
100 - 240V ~
47 - 63Hz
PA-223S
Line Out
Pre / Post
Master Mono / St
Serial N°
Right
INPUTS
OUTPUTS
SPEAKER OUTPUTS
Left Line R Line L Rec Out Line 1 Mic 1Line 2 Mic 2
Example of one PA-223A-140

PA-223A-140 User’s Manual
2PA-223A-140 User’s Manual 3
SUMMARY
SUMMARY
INTRODUCTION
INTRODUCTION Page 3
ADVICE FOR A GOOD USE
ADVICE FOR A GOOD USE Page 3
BASIC EQUIPMENT
BASIC EQUIPMENT Pages 4-5
- Power Supply Input Page 4
- ON/OFF button Page 4
- Talk Overs Page 4
- Tone adjustment Page 4
- Inputs Page 4
- Volume Controls Page 5
-Outputs Page 5
OPTIONS
OPTIONS Pages 5-12
- Wireless receiver SDR-6216M Page 6
- Handheld microphone SQ-5016 + Charger Pages 6-7
- Beltpack transmitter SM-5016 + Charger Pages 8-9
- Audio transmitter RP-6016M Page 10
- Digital player EM040 Pages 11-12
- CD/USB player CD-456 Pages 13-15
- Digital player EM010PR Pages 16-18
- Digital record/player EM020R Pages 19-22
TECHNICAL DATA
TECHNICAL DATA Page 23
INTRODUCTION
INTRODUCTION
Thank you for choosing PA-223A-140. To ensure the best performance and get the maximum life
out of the equipment, we recommend that you read this manual carefully.
PA-223A-140 is an automatic mixer which can be equipped with 1 player, 1 audio transmitter
or/and 1 UHF wireless module. This product only functions on AC main 100-240V, 47-63 Hz.
ADVICE FOR A GOOD USE
ADVICE FOR A GOOD USE
The exclamation point inside an equilateral triangle indicates the existence of internal
components whose substitution may effect safety. Also indicates important operating
instructions.
The lightning and arrowhead symbol warns about the presence of uninsulated dange-
rours voltage. To reduce the risk of electric shock, do not remove the cover. Refer servi-
cing to qualified personnel.
3Do not use the sound system in a humid or dusty place, or near any heat sources such as radia-
tors, heat registers, neither under the sun or at very low temperatures.
3Place the sound system in a ventilated place.
3Be careful when moving this unit in order not to damage the electronics.
3Carry the sound system with caution.
3Do not forget to decrease the volume switch before turning off the sound system.
3Handle the control switches carefully.
3Clean the sound system regularly.
3Keep the carton in case of return.Transport will be safe and without any risk of damage.

PA-223A-140 User’s Manual 5
PA-223A-140 User’s Manual
4
VOLUME CONTROLS
PA-223 is equipped with 4 independent volume controls:
MIC1, MIC2, Line1, Line2.
OUTPUTS
AMPLIFIER 2 x 70 W RMS
Output 2 x 70 W on 4 pole Speakon plug. Cable 1- et 1+
2 balanced XLR outputs (3 pole connector) right and left.
1 Changeover switch Mono/Stereo : Allows to switch the Line output before or after the volume
control.
Post: The level of the output depends on the volume control.
Pré: The level of the line output is not modifiable.
1 REC OUTPUT stereo equipped with 2 dual RCA connectors, allowing to connect auxiliary pro-
duct and to register for example a speech.
BASIC EQUIPMENT
BASIC EQUIPMENT
POWER SUPPLY INPUT
AC 110/220 power supply input. Allows working on AC main. It is recommended to use
the provided cable.
ON/OFF BUTTON
Use this button to switch on/off the device.
PREAMPLIFIER
automatic mixer stereo 2 x 70 W RMS / 4 ohms
INPUTS
2 MIC INPUTS equipped with XLR(3 pins) connectors. The balanced inputs allow use of long
cables. One condition: use high quality cables.
2 LINE INPUTS equipped with 2 dual RCA connectors, allowing to connect auxiliary product such
as tuner, CD or Tape player. If all 4 inputs are connected, you can use them simultaneously. Every
input has its own volume control.
TONE ADJUSTMENT
PA-223 is equipped with 3 highly performing tone adjustments.
Bass, Mid, treble : +/- 12 dB efficiency
INPUTS
Line 1 Mic 1Line 2 Mic 2
MIN MAX
Bass
MIN MAX
Mid
MIN MAX
Hi
MIN MAX
Mic 1
MIN MAX
Mic 2
MIN MAX
Line 1
MIN MAX
Line 2
Right
SPEAKER OUTPUTS
Left
Line Out
Pre / Post
Master Mono / St
OUTPUTS
Line R Line L Rec Out

PA-223A-140 User’s Manual 7
PA-223A-140 User’s Manual
6
Microphone settings
1. Making changes to CHANNEL/FREQUENCY
Press on Set for 2 seconds to enter into Settings.
Use UP or DOWN button to go to the Channel/Frequency page. Pressing UP or DOWN button
will increase of decrease the channel number. The corresponding frequency will change accor-
dingly. When a desired channel is being selected, it will automatically be saved and stored in the
memory.
2. Making changes to SENSITIVIY
Use UP or DOWN button to go to the Set page.. Use UP or DOWN to decrease or increase sensi-
tivity. Level: 1 - 4 . for singing, Level 4 for speech or if microphone is used with a stand
3. Making changes to battery selection
Use UP or DOWN to go to the Battery selection page. Press UP or DOWN to move the cursor to
either: NiMH (rechargeable battery) or AKLN (alkaline). When the battery has been selected it is
saved and stored in the memory.
Changing Batteries
2 pieces of AA batteries are used. Unscrew the tap of battery com-
partment and insert the new batteries. BEWARE OF THE POLARITY
HC-30 Charger
Handheld microphones and beltpack transmitters can be reloaded.The charger HC-30 is for the
handheld microphone SQ-5016. Before loading check that the batteries are rechargeable ones.
For rechargeable batteries we strongly recommend NiMH batteries, no alkanies.
Wrong batteries can damage the microphone functions. Check battery status. Many
batteries are known to have leakage problem of conductive and corrosive liquid.
Remove the batteries if you do not plan to use the microphone for a few days. Also
check that transmitter and receiver are on the same channel.
LCAUTION: BATTERY
OPTIONS
OPTIONS
RECEIVER SDR-6216M
Technical caracteristics of receiver SDR-6216M
UHF receiver, True Diversity, with Pilotone.
3Switch on the receiver:
The switch on the right is power switch and volume control
3Switch on the handheld microphone/beltpack transmitter:
The LEDS A and B are lightning when the UHF link between transmitter and receiver is ok.
Channel can be changed with the switch on the left side.
HANDHELD MICROPHONE TRANSMITTER SQ-5016 (UHF)
The microphone is equipped with 16 frequencies
1. Microphone capsule
2. Battery status led
3. Power switch (ON/OFF)
4. LCD display
5. Battery compartment
6. Rotative protective cap for controls
7. Lock/Unlock
8. Set
9. UP
10.DOWN
11.Charging Port
12.Name plate
On/Off + Volume
Selection of the channel LED A et B
55001166

PA-223A-140 User’s Manual 9
PA-223A-140 User’s Manual
8
Battery Installation
SM-5016 uses 2 pieces of " AA " size batteries (Alkaline battery is recommended ).
To install or remove the batteries, press the release buttons at the edges of the
transmitter to open or close the cover as illustrated below.
HC-37 Charger
The beltpack transmitter SM-5016 can be reloaded with the charger HC-37.
Before loading check that the batteries are rechargeable ones.
For rechargeable batteries we strongly recommend NiMH batteries, no alkanies.
Wrong batteries can damage the microphone functions. Check battery status. Many
batteries are known to have leakage problem of conductive and corrosive liquid.
Remove the batteries if you do not plan to use the belt transmitter for a few days.
Also check that transmitter and receiver are on the same channel.
LCAUTION: BATTERY
BELT TRANSMITTER SM-5016 (UHF)
Belt transmitter settings
1. Making changes to CHANNEL / FREQUENCY
Press on Set for 2 seconds to enter into Settings.
Use UP or DOWN button to go to the CHANNEL /FREQUENCY page. The
cursor will flash to allow changes to be made. Pressing UP or DOWN but-
ton will increase or decrease the channel number. The corresponding fre-
quency will change accordingly. When a desired channel(frequency) is being selected, it will be
automatically saved and stored in the memory.
2. Input Level Gain Control Adjustment
Low impedance (Lo-Z) " MT" & high impedance (Hi-Z) " GT" gain controls are situated inside the
transmitter. Gain controls are adjustment ports that enable you touse microphones of differing
output levels and Guitar or instruments with Hi-Z output. To adjust microphone (Lo-Z) input
levels, turn the "MT" control and to adjust the Guitar or instrument (Hi-Z) input, adjust the "GT"
gain control to set the transmitter's desired audio input level.
3. Making changes to Battery selection
Use UP or DOWN button to go to the Battery selection page. Press SET for
about 2 seconds to activate the cursor. Press UP or DOWN button to move
the cursor to either NiMH (rechargeable battery) or AKLN (Alkaline bat-
tery) position.When the desired option has been selected, press SET for about 2 seconds to save
and store the data in the memory.
1. Antenna
2. Battery weak indicator
3. Audio mute switch
4. Mini-XLR connector
5. Power ON / OFF switch
6. LCD display
7. Charging port
8. Cover release button
9. Charging contacts
10. Lavalier microphone
11. Mic clip
12. SET
13. UP
14. DOWN
15. GT
16. MT
2
1
3
4
9
7
8
56
10
11
12
13 14
15 16

PA-223A-140 User’s Manual 11
PA-223A-140 User’s Manual
10
PLAYERS
The PA-223A-140 can be equipped with 1 player. You can chosse between 4: CD/MP3/USB Player
(reference CD-456), digital player (reference EM010PR), digital player/recorder (reference EM020R),
built in under the LED or digital player (reference T-EM040).
T-EM040
The USB/MP3 and MMC Card player can read MP3 and WMA format.
Key Explanation Front cover
of the player
PLAY/
PAUSE
Starts/
Pauses playback
STOP Stops playback.
UP/CUE
Skip
This function allows you to select a specific title.
In stop mode:
Changes the starting play track (file) during stop mode or cyclics to the
first track, if it is the last track.
In play mode, pause mode, random play mode:
Selects the next titel (file).
DOWN/
REV
Skip
This function allows you to select a specific title.
In stop mode:
Changes the starting play track (file) during stop mode or cyclics to the
last track, if it is the first track.
In play mode, pause mode, random play mode:
Selects the previous titel (file).
FOLDER UP Press this button to select the next folder.
In stop mode: Skips the starting play folder and selects the next folder
It cyclics to the first folder if it is the last folder.
In normal play mode: Skips the current file and selects the next folder's
first file.
2
1
3456
UHF TRANSMITTER RP-6016M
Technical specifications of transmitter RP-6016M
UHF 16 frequencies , True Diversity, with Pilotone
1. Power switch (ON/OFF)
2. Antenna socket (TNC)
3. Channel
4. Audio sensitivity: clockwise to increase sensitivity and anti-clockwise to decrease.
5. Output power switch. L for LOW power and H for HIGH power. Low Output power will reduce
the RF transmission distance and High Output power will extend the possible RF transmission dis-
tance.
The RP-6016M transmitter enables the link between PA-223 and other active sound systems
(XPresso, Nomade UHF, Premio UHF,...) Furthermore, PA-223 can be linked via cable to other pas-
sive annex cabinets.
UHF amplified sound system
Nomade
UHF amplified sound system
Premio
UHF amplified sound system
Xpresso

PA-223A-140 User’s Manual 13
PA-223A-140 User’s Manual
12
Key Explanation Front cover
of the player
FOLDER
DOWN
Press this button to select the previous folder.
In stop mode: Skips the starting play folder and selects the previous
folder It cyclics to the last folder if it is the first folder.
In normal play mode: Skips the current file and selects the previous
folder's first file.
REPEAT [repeat] mode is changed cyclically shown below
Repeat off repeat one track repeat all
RST System reset.
RANDOM All titles are played in a random sequence
VOL.-
VOL.+
Decrease volume
Increase volume
FUNC This button alows to select CARD or USB mode.
+10 When this key is pushed during playback, pause or stop, the device
selects the 10th MPR3 file which is following the current file.
If less than 10 files are left during playback, the device plays the first
file..
CD-456
The CD player /MP3/USB Plug is equipped with an antichoc memory making it insensible to use
handle and vibrations. The absence of drawer makes handling CDs in and out secure. It is equip-
ped with Pitch control.

PA-223A-140 User’s Manual 15
PA-223A-140 User’s Manual
14
Keys Explanation Front Panel Remote
PLAY/
PAUSE
If on Stop CD starts playing
If on Play it turns to Pause
If on Pause the CD starts playing again
STOP/
EJECT
Stops music or
CD ejection
Pitch
Control
Clockwise to increase music speed and anti clockwise to
decrease music speed.
ESP Anti choc memory. Lasts 40 seconds
UP/CUE
Skip
Single and slightly pressed skips to next track. If pressed
again a little longer goes forward in the track.
Play mode:
The selected track starts playing
Stop/Pause mode:
Skips to next track.
Program mode:
Skips to next track according to program selection
DOWN/
REV
Skip
Single and slightly pressed skips to previous track. If pres-
sed again a little longer goes to previous track
Play mode:
The selected tracks starts automatically
Stop/Pause mode:
Playing does not start automatically
Program mode:
Skips to previous track according to program selection
FOLDER
Skip
Enables to skip to next file
Stop mode: skips to next file
Program mode : skips to the first track in the next file.
Play mode : skips to the first track in the next file
Keys Explanations Front panel Remote
FOLDER
Skip
Enables to skip to previous file
Stop mode : skips to previous file
Program mode: skips to first track in previous file
Play mode: skips to first track in previous file
REPEAT "REPEAT" in following range
repeat all random repeat track play all
repeat all random repeat
PROG Enables to choose the tracks .
To delete this selection press Stop.
MUTE Mute: to cancel Mute press this button again.
CD Changes mode and skips to CD-MP3 mode
USB Changes mode and skips to USB mode
VOL- Decreases volume by 1 dB
(lowest volume = 0dB)
VOL+ Increases volume by 1 dB
(highest volume 30dB)
FIND Enables to change the display information (Album or title)
and to choose the right title or file.
0~10 The keyboard enables to choose the title directly by typing
title number + Play.

PA-223A-140 User’s Manual 17
PA-223A-140 User’s Manual
16
EM-010PR
This player is equipped with Pitch Control. Keys Explanations Front Panel
Player Remote
POWER To switch on or off the player
PLAY/
PAUSE
Play
Pause
STOP
USB/Card
(FUNC)
Stops music
Changes mode
Pitch
Control
Clockwise to increase music speed and anticlockwise to
decrease music speed
UP/CUE
Title Skip
Press briefly to skip to next title. Press a little longer (>0,7s)
to play forwards within a title
Play mode:
The selected title starts automatically
Stop/Pause mode:
The selected title does not start automatically
Program mode:
Enables to skip to next title.
DOWN/
REV
Title Skip
Press briefly to skip to previous title.
Press a little longer (>0,7s) to play backwards within a title.
Play mode:
The selected title starts automatically
Stop/Pause mode:
The selected title does not start automatically
Program mode:
Skips to previous title
PRE-UP
FOL-
DER>>
Press this to skip to next file
Stop mode : to choose next file
Program mode : to select the first title in next file.
Play mode : to select the first title in next file

PA-223A-140 User’s Manual 19
PA-223A-140 User’s Manual
18
Keys Explanations Front Panel
Player Remote
PRE-
DOWN
FOL-
DER<<
Press this to skip to previous file
Stop mode : to select previous file
Program mode : to select the first title in previous file
Play mode : to select the first title in previous file
REPEAT Press this for Repeat function
Repeat 1 track
Repeat 1 file:
Repeat all track
Repeat off repeat 1 track repeat 1 file
repeat all track
PROG Press this to select title. To delete the selection press Stop.
MUTE Mute: stops music
Press and music starts again
INTRO Intro: plays each track for 10 seconds.
RAN-
DOM
Random play mode
VOL- Decreases volume by 1 dB
(lowest volume = 0 dB)
VOL+ Increases volume by 1dB
(highest volume = 30dB)
FIND Press this to change information on display (name of album
or title) and to select title or file.
0~10 Tape directly number of title + play on the keyboard.
EM020R
MP3 / USB + SD MMC digital player/recorder.

PA-223A-140 User’s Manual 21
PA-223A-140 User’s Manual
20
Keys Explanations Front panel
player Remote
POWER On/Off
PLAY/
PAUSE
Plays music
Pause
STOP Stops music
FUNC To change mode
USB CARD AUX
UP/CUE
Title skip
Press briefly to select next title.
Press a little longer to go forward in the title (>0,7s)
Play mode :
The selected track starts automatically
Stop/Pause mode:
The selected track does not start automatically.
Program mode:
Skips to next track according to selection
DOWN/
REV
Title skip
Press briefly to select previous title.
Press a little longer to go backward in the title (>0.7s)
Play mode :
The selected track starts automatically
Stop/Pause mode :
The selected track does not start automatically
Program mode :
Skips to previous track according to selection
DELETE In USB mode, press DEL and use >> Next or << Back to
select file. .Press for a while >> Next or << again to select the
file.
Press on DEL to start deleting the file
Keys Explanations Front panel
of player
Remote
control
REC Press briefly the button FUNC to chose: MP3, SD MMC or
AUX
If you press a little longer you can choose the recording qua-
lity
MIDJHIGHJLOWJMID
MID (128Kbps = medium quality), LOW (64Kbps = lowest
quality), HIGH (256Kbps = highest quality)
Select USB or CARD with >> Next or << Back
Press "REC" to start recording . The display indicates REC
WAIT, then REC AUX
If you want to stop recording press STOP. On the display:
REC OK
CAUTION : Memory place
You need space on your USB key or your card, otherwise
recording will not be possible. The display indicates REC
NG if problem with recording
File structure of recording
PRE-UP
FOL-
DER>>
Skips to next folder
Stop mode: skips to next file
Program mode : skips to the first file in next folder
Play mode : skips to the first file in next folder
.
USB Root
TM-AUX
TMCDROM
TMCDDA
AUX001.MP3
AUX002.MP3
Filename001.MP3
Filename002.MP3
Track001.MP3
Track002.MP3

PA-223A-140 User’s Manual
22
TECHNICAL DATA
TECHNICAL DATA
Basic Equipment
Basic Equipment PA-223A-140
Power Requirements Operates on AC 100-240V, 47-63 Hz
RMS Power 70 Watts 2 ways amplified
Inputs Mixable inputs:
2 RCA Line control inputs
2 MIC control inputs on XLR (3 pins)
Switch ON/OFF
Power Supply Input
Volume controls 4 independent volume controls:
- MIC1
- MIC2
- LINE1
- LINE2
Bands EQ Bass, Mid, Treble
Outputs 2 Speakon outputs; 4 pole
1 RCA Rec output
2 balanced outputs on XLR
1 changeover switch Mono/Stereo
More Information Dimensions: 19” x 2U x 190 mm
Weight : 3 kg / 6.6 lbs
Options
Options
Wireless System 1 UHF 16 Frequency Receiver SDR-6216M
Audio Transmitter 1 Transmitter Module RP-6016M to link to cabinets
Player USB/MMC Card player T-EM040
CD/USB player: CD-456
USB/MMC Card player: EM-010PR
USB/MMC Card record player: EM-020R
PA-223A-140 User’s Manual 23
Key Explanations Front panel
Player
Remote
control
PRE-
DOWN
FOL-
DER<<
Skips to previous folder
Stop mode :
Skips to previous folder
Program mode:
Selects first title in previous folder
Play mode:
Selects first title in previous folder
REPEAT "REPEAT"
Repeat all:
Repeat album:
Repeat off repeat all repeat album
PROG PROG : to make a selection of titles
To delete this selection, press STOP
MUTE Fonction Mute: music stops
To get back to music, press again
INTRO Intro: each title is being played for 10 seconds
RAN-
DOM
Random play mode
VOL- Volume decreases by 1 dB
(lowest volume = 0dB)
VOL+ Increases volume by 1 dB
(highest volume 30dB)
FIND Press to change the information on display (name of album
or title) and to select a title.
0~10 Tape directly on the keyboard number of title + Play