TAG MADDOX OFFICE User manual

INSTALLATION GUIDE
MADDOX OFFICE Organizer
components
Horizontal Bars
STEP 1 : Space horizontal bars (H) with channel facing up
STEP 1 : Space horizontal bars (H) with channel facing up
Vertical Bars End Caps Toggler #10-24 ScrewsPosts
tools
Allen Key 2.5 mm Allen Drill Bit 3mm 1/2” Drill Bit Leveler Jig K Jig L (Shop Supplied)
Posts 10-24 Screws 1/2`` Drill bit Allen key 2.5mm Leveler Toggler
Posts 10-24 Screws 1/2`` Drill bit Allen key 2.5mm Leveler Toggler
Posts
10-24 Screws
1/2`` Drill bit
Allen key 2.5mm
Leveler
Toggler
Posts 10-24 Screws 1/2`` Drill bit Allen key 2.5mm Leveler Toggler
install prep
STEP 1 : Space horizontal bars (H) with channel facing up
(included) (included)
STEP 1 : Space horizontal bars (H) with channel facing up
6”
(included)
Recommended but
not required
Refer to PART F for
placement
If installing on
partition replace
F with #8 wood
screw
60.2913.BW
INSTALL PREPARATION
PART A:
Page 1
WARNING:
This product can
expose you to
chemicals including
chromium (hexavalent
compounds), which
are known to the
State of California to
cause cancer and
birth defects or other
reproductive harm.
For more information,
visit
www.p65warnings.
ca.gov
ABCD
E
F
GHI
JKL
A
AA

V2
STEP 3 : Insert End caps (E) into channel on horizontal bars (H). Tighten set screws while pushing End cap.
step 2: Detail 1
Add arrows
Paint Jig (L), End cap
step 2: Detail 1
Add arrows
Paint Jig (L), End cap
Insert vertical
bars and end
caps
1
Insert
Jig K & L
2
STEP 3 : Insert End caps (E) into channel on horizontal bars (H). Tighten set screws while pushing End cap.
Secure
corners of
Vertical Bars
3
STEP 4 : Insert aligning Jig 1 (J1) into the channel on the horizontal bar (H).
Top view
STEP 4 : Insert aligning Jig 1 (J1) into the channel on the horizontal bar (H).
Top view
Add arrows (dotted)
Paint Vertical and drill bits
Add rotating arrow
step 3: Detail 1
Add arrows (dotted)
Paint Vertical and drill bits
Add rotating arrow
step 3: Detail 1
Add arrows (dotted)
Paint Vertical and drill bits
Add rotating arrow
step 3: Detail 2
Add arrows (dotted)
Paint Vertical and drill bits
Add rotating arrow
step 3: Detail 2
L
L
H
H
L
L
ASSEMBLY
PART B:
Page 2
B
B
B
CG
C
K
L
L
K
C
C

STEP 14 : Drill holes on the marked spot using 1/2`` drill bit. Introduce togglers into the drilled holes and fix posts using 10-24 screws.
STEP 14 : Drill holes on the marked spot using 1/2`` drill bit. Introduce togglers into the drilled holes and fix posts using 10-24 screws.
Add arrows (dotted)
Paint Vertical and drill bits
Add rotating arrow
step 4: Detail 1
D
V2
D
Top view
step 5: Detail 1
Secure
corners of
Vertical Bars
4
Tighten
Horizontal
Bars
5
Mark ONLY
top right
corner
6
STEP 8 : Use Jig 2 (J2) to align End caps (E) with each other. Tighten all remaining screws on Vertical bar (V2) while pushing horizontal bars (H) down.
Top view
STEP 8 : Use Jig 2 (J2) to align End caps (E) with each other. Tighten all remaining screws on Vertical bar (V2) while pushing horizontal bars (H) down.
Top view
B
H
A
STEP 11 : Locate frame on wall, mark hole drilling location to wall and drill hole using 1/2`` drill bit.
STEP 11 : Locate frame on wall, mark hole drilling location to wall and drill hole using 1/2`` drill bit.
ID
x1
Add arrows (dotted)
Paint Vertical and drill bits
Add rotating arrow
step 4: Detail 1
Add arrows (dotted)
Paint Vertical and drill bits
Add rotating arrow
step 4: Detail 1
Add arrows (dotted)
Paint Vertical and drill bits
Add rotating arrow
step 4: Detail 1
D
V2
D
Top view
step 5: Detail 1
D
V2
D
Top view
step 5: Detail 1
STEP 11 : Locate frame on wall, mark hole drilling location to wall and drill hole using 1/2`` drill bit.
WALL ( )
WALL
L
L
H
H
BB
L
L
If installing on partition replace
F with #8 wood screw
STEP 14 : Drill holes on the marked spot using 1/2`` drill bit. Introduce togglers into the drilled holes and fix posts using 10-24 screws.
ASSEMBLY & WALL INSTALLATION
PART C:
Page 3
E
F
D
LL
L

STEP 13 : Locatel frame using post intalled on last step. Level frame and mark wall by pressing on the remaining posts.
STEP 15 : Install frame and seccure by tightening set screws on every post.
Position and
level
7
Mark wall with
posts. Install
with post
extension.
8
Install and
secure to
complete
9
STEP 13 : Locatel frame using post intalled on last step. Level frame and mark wall by pressing on the remaining posts.
STEP 13 : Locatel frame using post intalled on last step. Level frame and mark wall by pressing on the remaining posts.
STEP 13 : Locatel frame using post intalled on last step. Level frame and mark wall by pressing on the remaining posts.
STEP 15 : Install frame and seccure by tightening set screws on every post.
STEP 15 : Install frame and seccure by tightening set screws on every post.
STEP 14 : Drill holes on the marked spot using 1/2`` drill bit. Introduce togglers into the drilled holes and fix posts using 10-24 screws.
STEP 15 : Install frame and seccure by tightening set screws on every post.
J
E
F
D
G
step 7
step 8
J
STEP 11 : Locate frame on wall, mark hole drilling location to wall and drill hole using 1/2`` drill bit.
WALL WALL
WALL ( )
WALL INSTALLATION
PART D:
Page 4

19”
42”
66”
13.5” 23” 35” 47”
VERTICALS
HORIZONTAL BARS
Available sizes
Available sizes
Available sizes
Available sizes
Available sizes
Available sizes
Available sizes
Available sizes
Available sizes
Available sizes
Available sizes
Available sizes
AVAILABLE SIZES & SUGGESTED CONFIGURATIONS
PART E:
Page 5

13.5” 23” 35” 47”
6.5''
6.5'' 6.5''6.5''
Jig1 Standard use scheme
13 1/2 inch
versions
23 inch
versions
35 inch
versions
47 inch
versions
Paint Jig
6.5''
6.5''
6.5''6.5''
Jig1 Standard use scheme
13 1/2 inch
versions
23 inch
versions
35 inch
versions
47 inch
versions
Paint Jig
6.5'' 6.5'' 6.5''
6.5''
Jig1 Standard use scheme
13 1/2 inch
versions
23 inch
versions
35 inch
versions
47 inch
versions
Paint Jig
Jig L (Shop Supplied)
.75”
6.5”
17.5”
Recommended but not required
L
6.5'' 6.5''
6.5''
6.5''
Jig1 Standard use scheme
13 1/2 inch
versions
23 inch
versions
35 inch
versions
47 inch
versions
Paint Jig
('X')
('Y')
('X')
Custom overhangh / Assembly without Jigs
- Recommended Max. 'X': 12 inches
- Recommended Max. 'Y': 40 inches
Assembly Without A Jig
Recommended
maximum ‘X’: 12”
Recommended
maximum ‘Y’: 40”
X” Y” X”
L
L
L
L
Jig L Positioning
PART F:
2”2”
Page 6

1. Standard cleaning: wipe clean with a slightly damp cloth. Do not use highly acidic or
alkaline cleaners, other non-recommended commercial cleaners or polishes, or treated cloths
that have been used to clean other furniture. Do not steam or use heat.
2. Stain removal: Mix denatured alcohol (methylated spirits) and warm water in equal
proportions, dampen a clean cloth with the mixture, and wipe stain until it’s removed.
Denatured alcohol is poisonous and highly ammable, but evaporates quickly and cleanly
and will remove stains from imitation leather surfaces. Do not steam or use heat.
Leave Behind Imitation Leather Care Instructions
Page 7

60.8916.BW
INSTALLATION GUIDE
MADDOX HOOKS
Coat Hook|300.8215.xxx
Triple Hook 300.8201.05.xxx | Shoe Hook 300.8218.05.xxx
Shoe Hook
3 1
2
"
11
4
"
51
2
"
Can be easily secured anywhere
along the frame without need of tools
4 3
8
"
1 1
2
" 3
4
"
3"
Can be easily secured anywhere
along the frame without need of tools
%
'(7$,/
%
6&$/(


$GGDUURZVDQGSDLQWSODWLFFOLSEODFN
Triple Hook
$
'(7$,/
$
6&$/(


$GGDUURZVDQGSDLQWSODWLFFOLSEODFN
Coat Hook
This product can expose you to chemicals including chromium (hexavalent compounds), which are known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov
WARNING:
Installation process for the Triple Hook and Shoe Hook is the same.

INSTALLATION GUIDE
MADDOX OFFICE ACCESSORES
Pencil Holder
310.8520.WH
60.8916.BW
This product can expose you to chemicals including chromium (hexavalent compounds), which are known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov
WARNING:
Pencil Tray + Containers
310.8522.3.WH
Paper Tray
310.8521.WH
Tablet Stand + Glass Whiteboard
310.8524.WH