Tailwind FlexiPole Connect User manual

FlexiPole Connect (ES)
Quick Installation Guide
© 2013 Tailwind Solutions Ltd

FlexiPole Connect (ES)
Quick Installation Guide
1
TOOLS
5 min
PARTS
x1
x1
Remove original
cover from stand
Slot new cover on to stand.
CHECK
Features MUST
NOT be aligned or
plinth will not slot
into pole correctly
3
CHECK
Ensure logo on
cover is facing
forward. Must line up
with slot in stand
x1
IMPORTANT !!
Part MUST be
fitted with feature
on plug facing rear
of pole
2REAR
Position very important
Check before fitting
Must look like this
CLICK
Slot Flexipole
Connect into pole
until click
Plinth rotates in pole