Task Lighting LCDM-MAN-20A-24V User manual

LCDM-MAN-20A-24V
Manual LED Dimmer
LED SPECIALISTS
Features
• Digital numeric display with visible dimming level
• From 0-100% smooth dimming without ickering
• High load current up to 20A
• Logarithmic or linear dimming curve selectable
• PWM frequency 250Hz, 500Hz, 2kHz or 8kHz selectable
Technical Parameter
User Manual Ver 1.0.3
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Dimming data
Dimming range
250Hz, 500Hz, 2kHz, 8kHz
100 levels
0 -100%
Technical Parameters
Output power 240W/480W Max.
@ (12V/24V) 250Hz PWM
Output voltage 12-24VDC
Output current 1CH,20A Max.
Input and Output
Input voltage 12-24VDC
Input current 20A
Safety and EMC
EMC standard (EMC) EN301 489,EN 62479
Certification CE,EMC
EN60950
Safety standard(LVD)
Output type Constant voltage
Warranty and Protection
5 years
Protection Reverse Polarity
Warranty
PWM Frequency
Dimming level
Ta: -30
O
C ~ +55
O
C
T c:
+85
O
C
Model No.: V1-K
Rotary LED Dimmer
1 Channel/Constant Voltage/Step-less dimming/Four PWM frequency/Linear or logarithmic dimming/Numeric display
Features
● Digital numeric display, visible dimming level.
● 4096 levels 0-100% dimming smoothly without any flash.
● High load current up to 20A.
● Logarithmic or linear dimming curve selectable.
● PWM frequency 250Hz, 500Hz, 2kHz or 8kHz selectable.
OFF
IN
V1-K
DC12-24V 20A Max.
V
OUT
ON
LED Dimmer
V VV
%
1 2 3
1 2 1 2 1 2
logarithm
linear
250Hz500Hz2KHz8KHz
PWM Frequency
Dimming Curve
10A 15A 20 A 20 A
3
V1-K Rotary LED Dimmer
Page 1
AC100-240V
Power Supply
12-24VDC
Constant Voltage +Single color LED strip
Mechanical Structures and Installations
Wiring Diagram
86.00 mm
66.00 mm
67.00 mm
35.5 mm
OFF
IN
V1-K
DC12-24V 20A Max.
V
OUT
ON
LED Dimmer
V VV
%
1 2 3
1 2 1 2 1 2
logarithm
linear
250Hz500Hz2KHz8KHz
PWM Frequency
Dimming Curve
10A 1 5A 2 0A 20 A
3
Digital display
Rotary switch
Dip switch setting
LED output +
Power input -
Power input +
LED output -
Dimming curve Logarithmic or linear
Installation rack

Mechanical Structures and Installations
Wiring Diagram
User Manual Ver 1.0.3
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Dimming data
Dimming range
250Hz, 500Hz, 2kHz, 8kHz
100 levels
0 -100%
Technical Parameters
Output power 240W/480W Max.
@ (12V/24V) 250Hz PWM
Output voltage 12-24VDC
Output current 1CH,20A Max.
Input and Output
Input voltage 12-24VDC
Input current 20A
Safety and EMC
EMC standard (EMC) EN301 489,EN 62479
Certification CE,EMC
EN60950
Safety standard(LVD)
Output type Constant voltage
Warranty and Protection
5 years
Protection Reverse Polarity
Warranty
PWM Frequency
Dimming level
Ta: -30
O
C ~ +55
O
C
T c: +85
O
C
Model No.: V1-K
Rotary LED Dimmer
1 Channel/Constant Voltage/Step-less dimming/Four PWM frequency/Linear or logarithmic dimming/Numeric display
Features
● Digital numeric display, visible dimming level.
● 4096 levels 0-100% dimming smoothly without any flash.
● High load current up to 20A.
● Logarithmic or linear dimming curve selectable.
● PWM frequency 250Hz, 500Hz, 2kHz or 8kHz selectable.
OFF
IN
V1-K
DC12-24V 20A Max.
V
OUT
ON
LED Dimmer
V VV
%
1 2 3
1 2 1 2 1 2
logarithm
linear
250Hz500Hz2KHz8KHz
PWM Frequency
Dimming Curve
10A 15A 20A 20A
3
V1-K Rotary LED Dimmer
Page 1
AC100-240V
Power Supply
12-24VDC
Constant Voltage +Single color LED strip
Mechanical Structures and Installations
Wiring Diagram
86.00 mm
66.00 mm
67.00 mm
35.5 mm
OFF
IN
V1-K
DC12-24V 20A Max.
V
OUT
ON
LED Dimme r
V VV
%
1 2 3
1 2 1 2 1 2
logarithm
linear
250Hz500Hz2KHz8KHz
PWM Frequency
Dimming Curve
10A 15A 20A 20A
3
Digital display
Rotary switch
Dip switch setting
LED output +
Power input -
Power input +
LED output -
Dimming curve Logarithmic or linear
Installation rack
User Manual Ver 1.0.3
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Dimming data
Dimming range
250Hz, 500Hz, 2kHz, 8kHz
100 levels
0 -100%
Technical Parameters
Output power 240W/480W Max.
@ (12V/24V) 250Hz PWM
Output voltage 12-24VDC
Output current 1CH,20A Max.
Input and Output
Input voltage 12-24VDC
Input current 20A
Safety and EMC
EMC standard (EMC) EN301 489,EN 62479
Certification CE,EMC
EN60950
Safety standard(LVD)
Output type Constant voltage
Warranty and Protection
5 years
Protection Reverse Polarity
Warranty
PWM Frequency
Dimming level
Ta: -30
O
C ~ +55
O
C
T c:
+85
O
C
Model No.: V1-K
Rotary LED Dimmer
1 Channel/Constant Voltage/Step-less dimming/Four PWM frequency/Linear or logarithmic dimming/Numeric display
Features
● Digital numeric display, visible dimming level.
● 4096 levels 0-100% dimming smoothly without any flash.
● High load current up to 20A.
● Logarithmic or linear dimming curve selectable.
● PWM frequency 250Hz, 500Hz, 2kHz or 8kHz selectable.
OFF
IN
V1-K
DC12-24V 20A Max.
V
OUT
ON
LED Dimmer
V VV
%
1 2 3
1 2 1 2 1 2
logarithm
linear
250Hz500Hz2KHz8KHz
PWM Frequency
Dimming Curve
10A 15 A 20 A 20A
3
V1-K Rotary LED Dimmer
Page 1
AC100-240V
Power Supply
12-24VDC
Constant Voltage +Single color LED strip
Mechanical Structures and Installations
Wiring Diagram
86.00 mm
66.00 mm
67.00 mm
35.5 mm
OFF
IN
V1-K
DC12-24V 20A Max.
V
OUT
ON
LED Di mmer
V VV
%
1 2 3
1 2 1 2 1 2
logarithm
linear
250Hz500Hz2KHz8KHz
PWM Frequency
Dimming Curve
10A 15A 2 0A 20A
3
Digital display
Rotary switch
Dip switch setting
LED output +
Power input -
Power input +
LED output -
Dimming curve Logarithmic or linear
Installation rack
User Manual Ver 1.0.3
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Dimming data
Dimming range
250Hz, 500Hz, 2kHz, 8kHz
100 levels
0 -100%
Technical Parameters
Output power 240W/480W Max.
@ (12V/24V) 250Hz PWM
Output voltage 12-24VDC
Output current 1CH,20A Max.
Input and Output
Input voltage 12-24VDC
Input current 20A
Safety and EMC
EMC standard (EMC) EN301 489,EN 62479
Certification CE,EMC
EN60950
Safety standard(LVD)
Output type Constant voltage
Warranty and Protection
5 years
Protection Reverse Polarity
Warranty
PWM Frequency
Dimming level
Ta: -30
O
C ~ +55
O
C
T c: +85
O
C
Model No.: V1-K
Rotary LED Dimmer
1 Channel/Constant Voltage/Step-less dimming/Four PWM frequency/Linear or logarithmic dimming/Numeric display
Features
● Digital numeric display, visible dimming level.
● 4096 levels 0-100% dimming smoothly without any flash.
● High load current up to 20A.
● Logarithmic or linear dimming curve selectable.
● PWM frequency 250Hz, 500Hz, 2kHz or 8kHz selectable.
OFF
IN
V1-K
DC12-24V 20A Max.
V
OUT
ON
LED Dimmer
V VV
%
1 2 3
1 2 1 2 1 2
logarithm
linear
250Hz500Hz2KHz8KHz
PWM Frequency
Dimming Curve
10A 15 A 2 0A 2 0A
3
V1-K Rotary LED Dimmer
Page 1
AC100-240V
Power Supply
12-24VDC
Constant Voltage +Single color LED strip
Mechanical Structures and Installations
Wiring Diagram
86.00 mm
66.00 mm
67.00 mm
35.5 mm
OFF
IN
V1-K
DC12-24V 20A Max.
V
OUT
ON
LED Di mmer
V VV
%
1 2 3
1 2 1 2 1 2
logarithm
linear
250Hz500Hz2KHz8KHz
PWM Frequency
Dimming Curve
10A 1 5A 20A 2 0A
3
Digital display
Rotary switch
Dip switch setting
LED output +
Power input -
Power input +
LED output -
Dimming curve Logarithmic or linear
Installation rack

PWM Frequency Setting
V1-K Rotary LED Dimmer
User Manual Ver 1.0.3 Page 2
Dimming c urve setting
Linear dimming c urve Logarithmic dimming curve
100
90
80
70
60
50
40
30
20
10
PW M d uty (% )
Malfunctions Analysis & Troubleshooting
Malfunctions
Causes Troubleshooting
1. Output cable is too long
2. Wire diameter is too small
3. Overload beyond power supply capability
4. Overload beyond controller capability
1. Reduce cable or loop supply
2. Change wider wire
3. Replace higher power supply
4. Add power repeater
1.Check the power
2.Check the connection
No light
Uneven intensity
between front and
rear,with voltage drop
100
90
80
70
60
50
40
30
20
10
PW M d uty (% )
50 60 70 80 90 100
Brightness(% )
10 20 30 40
Gamma=1.6
50 60 70 80 90 100
Brightness(% )
10 20 30 40
Gamma=1.0
PWM frequency setting
1 2 1 2 1 2 1 2
250Hz500Hz2KHz8KHz
10A 15A 20A 20A
3 3
100
90
80
70
60
50
40
30
20
10
PW M d uty (% )
W e can select four PWM frequency: 250Hz, 500Hz, 2kHz or 8kHz.
Higher PWM frequency, will cause lower output current, higher power noise,
but more suitable for camera(No flickers for video).
Lorem ipsum
1. No power
2. Wrong connectipn or insecure
We can select four PWM frequency: 250Hz, 500Hz, 2kHz or 8kHz.
Higher PWM frequency, will cause lower output current, higher
power noise, but more suitable for camera (No ickers for video).
V1-K Rotary LED Dimmer
User Manual Ver 1.0.3 Page 2
Dimming curve setting
Linear dimming c urve Logarithmic dimming curve
100
90
80
70
60
50
40
30
20
10
PW M d uty (% )
Malfunctions Analysis & Troubleshooting
Malfunctions
Causes Troubleshooting
1. Output cable is too long
2. Wire diameter is too small
3. Overload beyond power supply capability
4. Overload beyond controller capability
1. Reduce cable or loop supply
2. Change wider wire
3. Replace higher power supply
4. Add power repeater
1.Check the power
2.Check the connection
No light
Uneven intensity
between front and
rear,with voltage drop
100
90
80
70
60
50
40
30
20
10
PW M d uty (% )
50 60 70 80 90 100
Brightness(% )
10 20 30 40
Gamma=1.6
50 60 70 80 90 100
Brightness(% )
10 20 30 40
Gamma=1.0
PWM frequency setting
1 2 1 2 1 2 1 2
250Hz500Hz2KHz8KHz
10A 15A 20A 20A
3 3
100
90
80
70
60
50
40
30
20
10
PW M d uty (% )
W e can select four PWM frequency: 250Hz, 500Hz, 2kHz or 8kHz.
Higher PWM frequency, will cause lower output current, higher power noise,
but more suitable for camera(No flickers for video).
Lorem ipsum
1. No power
2. Wrong connectipn or insecure
Dimming Curve Setting
Malfunctions Analysis & Troubleshooting
V1-K Rotary LED Dimmer
User Manual Ver 1.0.3 Page 2
Dimming curve setting
Linear dimming curve Logarithmic d imming curve
100
90
80
70
60
50
40
30
20
10
PW M d uty (% )
Malfunctions Analysis & Troubleshooting
Malfunctions
Causes Troubleshooting
1. Output cable is too long
2. Wire diameter is too small
3. Overload beyond power supply capability
4. Overload beyond controller capability
1. Reduce cable or loop supply
2. Change wider wire
3. Replace higher power supply
4. Add power repeater
1.Check the power
2.Check the connection
No light
Uneven intensity
between front and
rear,with voltage drop
100
90
80
70
60
50
40
30
20
10
PW M d uty (% )
50 60 70 80 90 100
Brightness(%)
10 20 3 0 40
Gamma=1.6
50 60 70 80 90 100
Brightness(%)
10 20 3 0 40
Gamma=1.0
PWM frequency setting
1 2 1 2 1 2 1 2
250Hz500Hz2KHz8KHz
10A 15A 20A 20A
3 3
100
90
80
70
60
50
40
30
20
10
PW M d uty (% )
W e can select four PWM frequency: 250Hz, 500Hz, 2kHz or 8kHz.
Higher PWM frequency, will cause lower output current, higher power noise,
but more suitable for camera(No flickers for video).
Lorem ipsum
1. No power
2. Wrong connectipn or insecure
While every effort has been made to ensure the accuracy of all information provided Task Lighting can not be held responsible for any errors.
Task Lighting also reserves the right to modify/delete product details without notice.
www.tasklighting.co.nz PH: 09 820 0004