Taurus Amplification TH Series User manual

TH-410
TH-1210
TH-1510
TH-212
TH-Series BASS
SPEAKER CABINETS
MANUAL
DESIGNED BY MUSICIANS FOR MUSICIANS
Disposal of old Electrical & Electronic Equipment (Applicable throughout
the European Union and other European countries with separate
collection programs)
This symbol, found on your product or on its packaging, indicates that this product should
not be treated as household waste when you wish to dispose of it. Instead, it should be
handed over to an applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences to the environment and human health, which could otherwise be
caused by inappropriate disposal of this product. The recycling of materials will help to
conserve natural resources. For more detailed information about the recycling of this
product, please contact your local city office, household waste disposal service or the retail
store where you purchased this product.
Box Electronics ul. Cieszyńskiego 4, 81-881 Sopot, Poland
e-mail [email protected] / www.taurus-amp.pl
RoHS

TYPE
TH−212 TH−1510
TH−410
Power Hending
RMS
Impedance
Sensitivity
(1W/1m)
Configuration
LF − Speakers
Connectors
Weight
Cover
HF − Speakers
HF − Control
100dB 99dB 103dB 102dB
two way
2x12" 4x10"
Neodimium Neodimium Neodimium Neo + Ferrite
1x15”+1x10" 1x12”+2x10"
740mm
520mm
405mm
740mm
520mm
405mm
885mm
520mm
405mm
885mm
520mm
405mm
27kg 27kg 32.5kg 32,5kg
SPECIFICATIONS
TH−1210
H
W
D
Dimensions:
HORN level switch 100 − 60% − OFF
SPEAKON
JACK
+
SPEAKON
JACK
+
SPEAKON
JACK
+
SPEAKON
JACK
+
compression driver ceramic tweeter ceramic tweeter compression driver
+- -+
JACK MONO
SPEAKON
1+
1-
2+
2-
-
+
TERMINAL
polyurethane−hybrid elastomer
600W/2x300W 500W/2x250W 1000W/2x500W 600W/2x300W
4ohm/2x8ohm 4ohm/2x8ohm 4ohm/2x8ohm4ohm/2x8ohm
CONNECTORS
PHASE
When connecting speakers with amplifiers one should always make sure that
left and right speakers are not crossed in phase witch means that the positive
and negative signals are not swapped over in any of the speakers. Phase
mismatch results with worse quality of low frequencies and wrong stereo
image.
RMS power of the amplifier should not be higher then speaker's RMS power
assuming that impedances of both are equal.
Never overload the power AMP.
Do not connect DC sources to the speakers.
Do not place the speakers close to TV sets, PC monitors, magnetic tapes
and disks, etc.
Protect speakers from water and high humidity.
PRECAUTIONS
MONO mode - standard configuration for connecting all speakers
to one amplifier.
BI-AMP mode - each speaker section can be connected separately.
In this mode, two separate amplifiers can be connected with the cabinet
or use only one selected cabinet's section with one amplifier.
The BI-AMP option can also be used in semi-STEREO mode.
The operating mode switch gives an additional option of changing
the cabinet's impedance.
in mono mode one 4 ohm output
in Bi-AMP mode two 8 ohm outputs
Speakrs Mode Selector
4ohm output in MONO mode
8
(all speakers works)
(top section of the speakers works)
.
ohm output in BI-AMP mode
8ohm input of the bottom speakers
section - active in
BI-AMP mode only.
Tweeter volume level selector:
100% , 60%, OFF.