Taurus LED Outdoor Par 18 User manual

LED Outdoor Par 18
User Manual
PLEASE READ THIS MANUAL BEFORE OPERATION

1. Operational Approach
1.1. Key Operation
1.1.1. Basic Usage
【MENU】 Choice primary menu or come back the up menu
【ENTER】 Enter or choice submenu
【UP】 Menu choose or increase parameter
【DOWN】 Menu choose or decrease parameter
1.1.2. Key Code
【UP、DOWN、UP、DOWN】+【ENTER】
Press【UP】then loosen，Then press【DOWN】 loosen，Then press【UP】loosen it，Then press
【DOWN】 loosen it，Last press【ENTER】confirm
1.2. Menu Structure
MENU ENTER UP DOWN

1.3. Menu Description
1.3.1. Static Mode（STAT）
At【STAT】menu and press【ENTER】key enter” Static mode”，The light will automatic
entry main engine then send data mode
At【ENTER】key choice submenu：【Red】、【Green】、【Blue】、【White】、【Strobe】
At【UP】/【DOWN】key choice numerical value
At【MENU】key back primary menu
1.3.2. AUTO
At【AUTO】menu press【ENTER】key enter“Auto mode”，light will send data mode by itself
Press【UP】/【DOWN】key choice the run program or user self the program
Press【MENU】key back primary menu
1.3.3. DMX and RUN
At【RUN】menu press【ENTER】key enter it，now still“external control model”
Press【UP】/【DOWN】key choice【DMX】or【SLAV】
【DMX】mean“DMX512 control station”，only receive standard DMX512 signal
【SLAV】mean connect station，only receive master signal
Press【MENU】key back to primary menu

1.3.4. DMX address set（DMX）
At【DMX】menu press【ENTER】key enter，now still“external control model”
Press【UP】/【DOWN】key choice【1~512】number，press【MENU】key back primary menu
1.3.5. DMX512 Mode Selection（PERS）
At【PERS】menu press【ENTER】key enter，now still“external control model”
Press【UP】/【DOWN】key choice required channel pattern
Press【MENU】key back primary menu
1.3.6. ID set Add code（ID）
At【ID】menu press【ENTER】key enter，not still“external control model”
Press【UP】/【DOWN】key choice【1~66】number，press【MENU】key back primary menu
1.3.7. TEMP
At【TEMP】menu press【ENTER】key enter，now still“external control model”
Press【UP】/【DOWN】key choice【CURR】or【TOP】
At【CURR】press【ENTER】key，can see present Celsius temperature
At【TOP】press【ENTER】key，can set temperature protection（defult85），
Press【UP】/【DOWN】repair temperature protection（range：20~150），press【MENU】keep
and back

1.3.8. Scene Edit（EDIT）
At【EDIT】menu press【ENTER】key enter，light will run self program and enter master
send data station
Press【ENTER】enter submenu or choice parameter，press【MENU】key back up menu
Press【UP】/【DOWN】key choice program、scene or parameter values. Set（SET）
At【SET】menu press【ENTER】key enter，now quit“external control model”
【UPLD】 is send self-program data，press【ENTER】key enter password confirm，input
right password【UP、DOWN、UP、DOWN】+【ENTER】，light become yellow，mean is sending
data，also show the speed of download，finished send light become green。When machine
receive data light become yellow，after right received light become green。If mainly
machine light protection is yellow then explain receive failue，Please close it then
received it again after open
【REST】 is recover default setting，press【ENTER】key run it。password：【UP、DOWN、
UP、DOWN】+【ENTER】
【ID】Is ID add switch setting，press【ENTER】key enter，press【UP】/【DOWN】key choice
【ON】permit ID add function，【OFF】close ID add function

【RGBW】 is color correction switch setting，press【ENTER】 key enter，press【UP】/
【DOWN】key enter【ON】permit color correction function，【OFF】not allow。RGB three
color’s ratio can at【CAL2】setting on menu
【POW】is choice setting power，press【ENTER】key enter，press【UP】/【DOWN】key enter
【Normal】or【High】，【Normal=33%】，【High=100%】
【DIM】 is setting non-linear dimmer speed，press【UP】/【DOWN】key choice，【OFF】
is close dimmer speed，【DIM1】is speed1（fastest），【DIM2】is speed2，【DIM3】 is speed3，
【DIM4】is speed4（slowest），the slowest speed the better soft dimmer
1.3.9. Set white light balance（CAL1）
At【CAL1】menu press【ENTER】key enter，now quit“external control model”
Press【UP】/【DOWN】key choice【White 1~11】,press【ENTER】key enter set up
Press【ENTER】key and choice【Red】、【Green】、【Blue】、【White】
Press【UP】/【DOWN】key choice number【0~255】
Remind：when DMX channel model is【STAG】，Ch6 can make 11 white light to show
1.3.10. Set Color Correction（CAL2）
At【CAL2】menu press【ENTER】key enter【RGBW】，now quit“external control model”
Press【ENTER】key then choice【Red】、【Green】、【Blue】
Press【UP】/【DOWN】key choice the color-ration【25~255】
1.3.11. Set Key Protection（KEY）
At【KEY】menu press【ENTER】key enter，now still“external control model”
Press【UP】/【DOWN】key choice【ON】/【OFF】
Choice【ON】，After enter the screen saver will lock key（Even after outage then
connect electric，still keep lock station），If need de blocking enter the right
password【UP、DOWN、UP、DOWN】+【ENTER】

Choice【OFF】，The key will open always
1.4. Console Operation
1.4.1. Channel Table
Total 7 DMX channel model：【STAG】、【ARC.1】、【AR1.d】、【ARC.2】、【AR2.d】、【AR2.S】、【HSV】
STAG channel model
channel
numerical
value
control function
1
0~255
Total dimmer
2
0~255
Red（when CH8 choice PR01~10，CH2 control TIME）
3
0~255
Green（when CH8 choice PR01~10，CH3 control FADE）
4
0~255
Blue
5
0~255
White
6
0~5
Invalid
6~20
HIGH POWER(only when in NORMAL POWER model)
21~30
Invalid
31~255
Color change
7
0~10
No strobe
11~255
Strobe speed（255 fastest）
8
0~20
Invalid
21~30
Built-in program1
……
……（Each 10 number deputy one program）
110~120
Built-in program10
121~130
Self-program1
……
……（Each 10 number deputy one program）
211~220
Self- program10
221~255
Invalid
9
0~255
Built-in program speed（self-program use CH2、CH3）
10
0~9
Dimmer speed（0~9 deputy use SET dimmer speed on menu）
10~29
Closed
30~69
Speed1（fastest）
70~129
Speed2
130~189
Speed3
190~255
Speed4（slowest）
11
0~9
ID address invalid
10~19
ID1
……
……（each 10 number deputy one ID）
200~209
ID20
210
ID21

211
ID22
……
……（each 1 number deputy one ID）
254
ID65
255
ID66
ARC.1 channel model
channel
numerical
value
Control function
1
0~255
Red
2
0~255
Green
3
0~255
Blue
AR1.d control model
channel
Numerical
value
Control function
1
0~255
Total dimmer
2
0~255
Red
3
0~255
Green
4
0~255
Blue
ARC.2 control model
channel
Numerical
value
Control function
1
0~255
Red
2
0~255
Green
3
0~255
Blue
4
0~255
White
AR2.d control model
channel
Numerical
value
Control function
1
0~255
Total dimmer
2
0~255
Red
3
0~255
Green
4
0~255
Blue
5
0~255
White
AR2.S control model
channel
Numerical
value
Control function
1
0~255
Total dimmer
2
0~255
Red
3
0~255
Green
4
0~255
Blue