Taurus T3-Cam User manual

Printed in China
© 2016 TAURUS. All Rights Reserved.
www.taurus-group.at
IP116
T3-Cam
B9700079008505074312
Made in PRC
bhp – best home products
Handels GmbH
St. Peter 38
9184 St. Jakob im Rosental
AUSTRIA
INPUT: DC 5V 1A
Wireless standards: IEEE802.11b/g/n
Frequency range: 2.4 GHz ~ 2.4835 GHz
S/N: 2008001

T3-Cam
HD WiFi Camera
MULTILINGUAL
QUICK GUIDE
EN DE FR NL

EN
Overview
• FrontView
Red indicator Blinking Enter WiFi pairing state
Blue indicator Blinking Searching network
On Network connected
• SideView • BackView
LED Indicators
Camera
Night Vision IR LEDs
Microphone
Day / Night Sensor
Reset button
microSD Card
Slot
Heat Vent
Power Jack
DC5V
Micro SD

EN
microSDCard(Notincluded)
Support 32GB microSD card maximum; please do not insert the
card after the camera is powered on.
This camera automatically records and saves video once every
20 minutes; the video recorded at the earliest will be replaced with
the latest ones if the microSD card is full.
Note: Please format your microSD card before inserting into this slot if any
le had been written in.
Whatisinsidethebox
WiFi Camera×1 AC Adapter×1
Quick guide×1 Reset Pin×1
Mounting materials (adhesive pad, screws, plugs, mounting plate) 1x

EN
DownloadtheApp
Download the App by searching “IP116 camera” from Apple Store
or Google Play.
If you also bought a smanos alarm system, you don't need to
download the separate app for the camera, just setup through the
app for the alarm system.
IP116 Camera
WiFi Pairing
1. Preparation
• Connect the device to the power
supply. Hold the reset button by
using the supplied reset pin until
the camera beeps once, and
then the red indicator starts to
blink.
• Find and choose the WiFi
named “smanos IP6” from
your phone’s WiFi list.

EN
2. PairingCamerawithWiFithroughApp
ENEN
Download the App
Download the App by searching “IP116 camera” from Apple Store
or Google Play.
If you also bought a Chuango alarm system, you don't need to
download the separate app for the camera, just setup through the
app for the alarm system.
IP116 Camera
WiFi Pairing
1. Preparation
•Hold the reset button by using
the supplied reset pin until the
camera beeps once, and then
the red indicator starts to blink
•Find and choose the WiFi
named “HD WiFi Cam”
from your phone’s WiFi list
2. Pairing Camera with WiFi through App
*
*
*
•Launch the App,
and then tap [+] to
add a new camera
*Make sure the
UID No. is displayed
before tapping [OK]
•Name your
camera, enter the
password (default:
888888) and input
your home WiFi
name & password
•When the blue
indicator is on,
it means the
camera has
connected with
WiFi
The paired camera will be displayed in the video list.
Note: For safety, it is recommended to change the password of your
camera on the setting menu after pairing.
ENEN
Download the App
Download the App by searching “IP116 camera” from Apple Store
or Google Play.
If you also bought a Chuango alarm system, you don't need to
download the separate app for the camera, just setup through the
app for the alarm system.
IP116 Camera
WiFi Pairing
1. Preparation
•Hold the reset button by using
the supplied reset pin until the
camera beeps once, and then
the red indicator starts to blink
•Find and choose the WiFi
named “HD WiFi Cam”
from your phone’s WiFi list
2. Pairing Camera with WiFi through App
*
*
*
•Launch the App,
and then tap [+] to
add a new camera
*Make sure the
UID No. is displayed
before tapping [OK]
•Name your
camera, enter the
password (default:
888888) and input
your home WiFi
name & password
•When the blue
indicator is on,
it means the
camera has
connected with
WiFi
The paired camera will be displayed in the video list.
Note: For safety, it is recommended to change the password of your
camera on the setting menu after pairing.
ENEN
Download the App
Download the App by searching “IP116 camera” from Apple Store
or Google Play.
If you also bought a Chuango alarm system, you don't need to
download the separate app for the camera, just setup through the
app for the alarm system.
IP116 Camera
WiFi Pairing
1. Preparation
•Hold the reset button by using
the supplied reset pin until the
camera beeps once, and then
the red indicator starts to blink
•Find and choose the WiFi
named “HD WiFi Cam”
from your phone’s WiFi list
2. Pairing Camera with WiFi through App
*
*
*
•Launch the App,
and then tap [+] to
add a new camera
*Make sure the
UID No. is displayed
before tapping [OK]
•Name your
camera, enter the
password (default:
888888) and input
your home WiFi
name & password
•When the blue
indicator is on,
it means the
camera has
connected with
WiFi
The paired camera will be displayed in the video list.
Note: For safety, it is recommended to change the password of your
camera on the setting menu after pairing.
• Launch the App,
and then tap [+] to
add a new camera
*Make sure the
UID No. is displayed
before tapping [OK]
• Name your
camera, enter the
password (default:
888888) and input
your home WiFi
name & password
• When the blue
indicator is on,
it means the
camera has
connected with
WiFi
The paired camera will be displayed in the video list.
Note:For safety, it is recommended to change the password of your
camera on the setting menu after pairing.

EN
Settings
Setting
Button
Camera
Sharing QR
Code
Device ID
ShareorStopSharingCamerawithYourFriends
ENEN
Settings
Setting
Button
Camera
Sharing QR
Code
Device ID
Share or Stop Sharing Camera with Your Friends
Tap and save the QR code icon on your
camera’s [Settings] interface, send to your
friends so they can watch your camera
from his/her App by scanning the given
QR code.
If you want to stop sharing the camera,
please change the password of camera.
Password
All the successfully paired phones have the same authority
as administrator who can view and set the camera (including
changing the password), so it is recommended to pair the phones
of users with caution. For non-administrator users, you can share
the camera by sending the QR code for them to scan.
Sync the Date and Time
Check if the camera’s date and time are set correctly. Sync them
with your phone’s time if necessary.
Enjoy the App
Snapshot
Record
Hold To Talk
Speaker
Tap and save the QR code icon on your
camera’s [Settings] interface, send to
your friends so they can watch your
camera from his/her App by scanning
the given QR code.
If you want to stop sharing the camera,
please change the password of camera.

EN
Password
All the successfully paired phones have the same authority
as administrator who can view and set the camera (including
changing the password), so it is recommended to pair the phones
of users with caution. For non-administrator users, you can share
the camera by sending the QR code for them to scan.
SynctheDateandTime
Check if the camera’s date and time are set correctly. Sync them
with your phone’s time if necessary.
EnjoytheApp
Snapshot
Record
Hold To Talk
Speaker

EN
Installation
Important: This camera should be placed where the WiFi signal is
strong for optimal performance.
1. Separate the mounting
template on the bottom
of this camera from the
bracket by pressing the
snap as picture shows
2. Mount the template on the
wall by using the supplied
screws
3. Push and press the bracket
of the camera into the
template carefully, and then
adjust the angle to achieve
best shooting effect

EN
Specications
Image sensor 1/4” CMOS sensor
Min. illumination 0.02Lux @(F2.0,AGG ON),
0 Lux with lR
Shutter time 1/50s to 1/100,000s
Lens 2.4mm F2.0
Angle of view 95°
Video compression H.264
Bit rate Self-adaption
Max. image resolution 1280 x 720
Frame rate 30fps (1280 × 720)
Storage Built-in microSD card slot, up to 32GB
Wireless standards IEEE802.11b/g/n
Frequency range 2.4 GHz ~ 2.4835 GHz
Channel bandwidth 20/40MHz Support
Operating conditions Temperature: -5 °C - 60 °C
(23 °F - 140 °F)
Humidity: < 95% (non-condensing)
Power supply DC 5V 1A
Power consumption 5W MAX
Dimensions (L x W x H) 91 x 78 x 115 mm

T3-Cam
HD-WLAN-Kamera
SCHNELLANLEITUNG
DE

Übersicht
• Vorderansicht
Rote Anzeige Blinkt WLAN-Verbindung wird aufgebaut
Blaue Anzeige Blinkt Netzwerk suchen
Ein Netzwerk verbunden
• Seitenansicht • Rückansicht
LED-Anzeigen
Kamera
Nachtsicht-IR-LEDs
Mikrofon
Tag-/Nachtsensor
Rücksetztaste
MicroSD-
Kartensteckplatz
Entlüftung
Netzteil-
anschluss
DC5V
Micro SD
DE

MicroSD-Karte(nichtimLieferumfangenthalten)
Für 32GB-MicroSD-Karte (maximal). Bitte die Karte nicht
einstecken, wenn die Kamera eingeschaltet ist.
Die Kamera nimmt automatisch auf und speichert alle 20 Minuten.
Das zuerst aufgenommene Video wird mit dem zuletzt
aufgenommenen überspielt, wenn die MicroSD-Karte voll ist.
Hinweis: Bitte formatieren Sie Ihre MicroSD-Karte vor dem Einstecken in
den Steckplatz, falls bereits eine Datei darauf geschrieben wurde.
PrüfenSiedenPackungsinhalt
1x WLAN-Kamera×1 1x Wechselstromadapter
1x Schnellanleitung 1x Rücksetzstift
1x Montagematerial (Klebepad, Schrauben, Dübel, Montageplatte)
DE

Appherunterladen
Laden Sie die App aus dem Apple Store oder von Google Play
herunter, indem Sie „IP116 Camera“ suchen.
Wenn der IP Kamera mit der Alarmanlage von TAURUS O3
zusammen arbeitet, wird nur die APP der Alarmanlage benötigt.
IP116 Camera
WLAN-Verbindung
1. Vorbereitung
• Schließen Sie das Gerät an die
Stromversorgung an.
• Halten Sie die Rücksetztaste mit
dem mitgelieferten Rücksetzstift,
bis die Kamera einen Signalton
ausgibt und die rote Anzeige zu
blinken beginnt
• Suchen und wählen Sie das
WLAN namens „smanos
IP6“ in der WLAN-Liste
Ihres Telefons
DE

2. VerbindungderKameramitdemWLANmittelsApp
ENEN
Download the App
Download the App by searching “IP116 camera” from Apple Store
or Google Play.
If you also bought a Chuango alarm system, you don't need to
download the separate app for the camera, just setup through the
app for the alarm system.
IP116 Camera
WiFi Pairing
1. Preparation
•Hold the reset button by using
the supplied reset pin until the
camera beeps once, and then
the red indicator starts to blink
•Find and choose the WiFi
named “HD WiFi Cam”
from your phone’s WiFi list
2. Pairing Camera with WiFi through App
*
*
*
•Launch the App,
and then tap [+] to
add a new camera
*Make sure the
UID No. is displayed
before tapping [OK]
•Name your
camera, enter the
password (default:
888888) and input
your home WiFi
name & password
•When the blue
indicator is on,
it means the
camera has
connected with
WiFi
The paired camera will be displayed in the video list.
Note: For safety, it is recommended to change the password of your
camera on the setting menu after pairing.
ENEN
Download the App
Download the App by searching “IP116 camera” from Apple Store
or Google Play.
If you also bought a Chuango alarm system, you don't need to
download the separate app for the camera, just setup through the
app for the alarm system.
IP116 Camera
WiFi Pairing
1. Preparation
•Hold the reset button by using
the supplied reset pin until the
camera beeps once, and then
the red indicator starts to blink
•Find and choose the WiFi
named “HD WiFi Cam”
from your phone’s WiFi list
2. Pairing Camera with WiFi through App
*
*
*
•Launch the App,
and then tap [+] to
add a new camera
*Make sure the
UID No. is displayed
before tapping [OK]
•Name your
camera, enter the
password (default:
888888) and input
your home WiFi
name & password
•When the blue
indicator is on,
it means the
camera has
connected with
WiFi
The paired camera will be displayed in the video list.
Note: For safety, it is recommended to change the password of your
camera on the setting menu after pairing.
ENEN
Download the App
Download the App by searching “IP116 camera” from Apple Store
or Google Play.
If you also bought a Chuango alarm system, you don't need to
download the separate app for the camera, just setup through the
app for the alarm system.
IP116 Camera
WiFi Pairing
1. Preparation
•Hold the reset button by using
the supplied reset pin until the
camera beeps once, and then
the red indicator starts to blink
•Find and choose the WiFi
named “HD WiFi Cam”
from your phone’s WiFi list
2. Pairing Camera with WiFi through App
*
*
*
•Launch the App,
and then tap [+] to
add a new camera
*Make sure the
UID No. is displayed
before tapping [OK]
•Name your
camera, enter the
password (default:
888888) and input
your home WiFi
name & password
•When the blue
indicator is on,
it means the
camera has
connected with
WiFi
The paired camera will be displayed in the video list.
Note: For safety, it is recommended to change the password of your
camera on the setting menu after pairing.
• Starten Sie die
App und tippen
Sie auf [+], um
eine neue Kamera
hinzuzufügen
*Achten Sie darauf,
dass die UID-Nr.
angezeigt wird, bevor
Sie auf [OK] tippen
• Geben Sie Ihrer
Kamera einen
Namen, geben Sie
das Kennwort ein
(Standard: 888888)
und geben Sie den
Namen und das
Kennwort Ihres
Heim-WLAN ein
• Wenn die
blaue Anzeige
aueuchtet,
bedeutet dies,
dass die Kamera
erfolgreich mit
dem WLAN
verbunden wurde
Die verbundene Kamera wird in der Video-Liste angezeigt.
Hinweis:Aus Sicherheitsgründen wird empfohlen, das Kennwort für Ihre
Kamera nach dem Verbinden im Menü Einstellungen zu ändern.
DE

Einstellungen
Taste
Einstellungen
QR-Code für
Kamerafreigabe
Geräte-ID
KamerafürFreundefreigebenoderFreigabebeenden
ENEN
Settings
Setting
Button
Camera
Sharing QR
Code
Device ID
Share or Stop Sharing Camera with Your Friends
Tap and save the QR code icon on your
camera’s [Settings] interface, send to your
friends so they can watch your camera
from his/her App by scanning the given
QR code.
If you want to stop sharing the camera,
please change the password of camera.
Password
All the successfully paired phones have the same authority
as administrator who can view and set the camera (including
changing the password), so it is recommended to pair the phones
of users with caution. For non-administrator users, you can share
the camera by sending the QR code for them to scan.
Sync the Date and Time
Check if the camera’s date and time are set correctly. Sync them
with your phone’s time if necessary.
Enjoy the App
Snapshot
Record
Hold To Talk
Speaker
Tippen Sie auf das Symbol QR-Code in
den [Einstellungen] Ihrer Kamera, damit
andere Ihre Kamera von ihrer App sehen
können, indem sie den angegebenen
QR-Code scannen.
Wenn Sie die Kamerafreigabe beenden
möchten, ändern Sie das Kennwort der
Kamera.
DE

Kennwort
Alle erfolgreich verbunden Telefone verfügen über dieselben
Administratorrechte zur Ansicht und Einstellung der Kamera
(einschließlich Änderung des Kennworts), deshalb wird empfohlen,
die Telefone von Benutzern mit Vorsicht zu verbinden. Für
Benutzer ohne Administratorrechte können Sie die Kamera
freigeben, indem Sie ihnen den QR-Code zum Scannen senden.
DatumundUhrzeitsynchronisieren
Prüfen Sie, ob Datum und Uhrzeit der Kamera richtig eingestellt
sind. Synchronisieren Sie sie falls nötig mit Ihrem Telefon.
GenießenSiedieApp
Schnappschuss
Aufnahme
Zum Sprechen
halten.
Lautsprecher /
hineinhören
DE

Installation
Wichtig: Die Kamera sollte für optimale Leistung dort platziert werden,
wo das WLAN-Signal stark ist.
1. Trennen Sie die
Bohrschablone auf der
Unterseite der Kamera von
der Halterung, indem Sie
die Rastnase drücken, wie
auf dem Bild gezeigt
2. Montieren Sie die Schablone
mit den mitgelieferten
Schrauben an der Wand
3. Justieren Sie die Halterung
der Kamera sorgfältig auf
der Vorlage und stellen Sie
dann den Winkel ein, um
den besten Aufnahmeeffekt
zu erzielen
DE

TechnischeDaten
Bildsensor 1/4” CMOS sensor
Min. Beleuchtung 0.02Lux @ (F2.0, AGG ON),
0 Lux mit lR
Verschlusszeit 1/50 s bis 1/100.000 s
Objektiv 2,4 mm F2.0
Bildwinkel 95°
Video-Komprimierung H.264
Bitrate Selbstständige Anpassung
Max. Bildauösung 1280 x 720
Bildwechselfrequenz 30 fps (1280 × 720)
Speicher Eingebauter MicroSD-
Kartensteckplatz mit bis zu 32 GB
WLAN-Standards IEEE802.11b/g/n
Frequenzbereich 2,4 GHz ~ 2,4835 GHz
Kanalbandbreite Unterstützung für 20/40 MHz
Betriebszustand Temperatur: -5 °C - 60 °C
(23 °F - 140 °F)
Luftfeuchtigkeit: <95 %
(nicht-kondensierend)
Stromversorgung DC 5V 1A
Stromaufnahme 5 W max.
Abmessungen (L x B x H) 91 x 78 x 115 mm
DE