TDC 900 User manual

900 2 DOOR CABINET ASSEMBLY INSTRUCTIONS ©TDC Limited
ASSEMBLY INSTRUCTIONS
900 2 DOOR CABINET
IMPORTANT!
Please read these instructions carefully prior to assembling the cabinet.
This will prevent damage to product and save you time.
 Assemble cabinet on a flat clean surface.
 protect floor surface with cardboard or soft covering.
 When Moving Cabinets they MUST be lifted NOT dragged across the floor.
YOU WILL REQUIRE THE FOLLOWING TOOLS
 Screwdriver–Pozi-Drive No.2
 Hammer
YOUR PACK CONTAINS THE FOLLOWING COMPONENTS
1 x Left Side
1 x Right Side
1 x Bottom
1 x Shelf
1 x Frontrail
2 x Backrails
2 x Doors
1 x Toekick
1 x Hardware kit

900 2 DOOR CABINET ASSEMBLY INSTRUCTIONS ©TDC Limited
TIP : Arrow pointing outward
1
1
Hinge Mount
Place hinge mounts on sides as indicated.
Note: Check mount position.
2
2 Place Cam Studs into position.
A lite tap maybe required
To front edge of
cabinet
Catch end Front edge
Hinge mounts here
CamStud
Rafix CamConnector
Place Rafix Cam connectors into
position.
Place Cam Connectors into back
rails and Floor
Cam Connector
3
3
Rafix CamStud
Fit Rafix CamStud to Front rail
Use screw driver to screw stud in
Back Rails
Front Rail

900 2 DOOR CABINET ASSEMBLY INSTRUCTIONS ©TDC Limited
4
4 Fit Back Rails to side and tighten
Cam Connectors
Turn cam clockwise
to tighten
5
5
NOTE: Fit Floor to side with Cam holes
face down toward Bottom of cabinet
Fit front rail and tighten Rafix Cam Connector
Turn cam clockwise
to tighten
Fit remaining side and
tighten all cams
Tip : Check all Cam connectors twice
to make sure they are tight.
NOTE: Looking at the unit from
the back

900 2 DOOR CABINET ASSEMBLY INSTRUCTIONS ©TDC Limited
7
7 Fit shelf studs in place and fit shelf. Clip on door to hinge mounts
and use adjustment screw to align doors. Fit handles to doors with
handle screws.
Shelf studs
handles and screws
6
6
Knock In Hinges
Fit Knock IN hinges to doors.
Line up holes and tap into place
Before fitting top.
Place silicone around top edge of the cabinet
Then carefully insert sink on top of cabinet
HOW TO ADJUST
TIP : Clean excess silicone off quickly with a clean
cloth. Do not use your fingers
FITTING SINK TOP