TDRFORCE FL-540B User manual

FL-540B
Liquid Transfer Pump
Operating Instruction
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com

1
Specifics
FL-540B
Input Voltage 110-120V Power 330 W
Frequency 60Hz AMPS 3.2A
Connection 1’’ + 3/4’’ Flow Rate 10.5 GPM
Working Pressure 22 psi Max Head 36 ft
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com

2
OPERATION MANUAL
1.INSPECTION
-After unpacking the pump, please check if it has been damaged during transport. If so, please
contact TDRFORCE online services at the first time.
2.INSTALLATION
-Make sure that the main voltage corresponds to the voltage specified on the motor rating plate.
-Place the pump as near as possible to the suction tank.
-Do not submit the pump body to mechanical stress.
-The pump must be sheltered from weather ( sun- rain- wind- snow- chill).
-The motor must be absolutely grounded before any other operation.
-The suction pipe diameter must always be bigger than the suction port. Always fit a foot valve
with strainer on the suction pipe. Both suction and delivery pipe must be well fastened.
3.STARTING THE PUMP
-Check that the pump does not run out of the operating data.
-For the proper functioning of the system,allow a 20-minute stop for every 20 minutes of
dispensing. Operation of the pump without dispensing is only admitted for periods of no longer
than 3 minutes.
-The pump could be only used in fresh water & urea circulating and transferring.
-We recommend that the pump remains switched off whenever the system is not in use.
4.MAINTENANCE
-The dispensing system was designed and built to require a minimal amount of maintenance.
-Before carrying out any maintenance work, disconnect the dispensing system from any electrical
and hydraulic power source.
-During maintenance,the use of personal protective equipment (PPE)is compulsory.
-Whenever there is risk of frost, empty the plumb system.
-Check that the pipe connections are not loose to prevent any leaks.
-Check and keep the filter installed on the suction line clean. Check the pump body and keep it
clean and free of any impurities.
-Check that the electrical supply cables are in good condition.
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com

3
POSSIBLE WORKING DEFECTS
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com

4
Warranty Card
Customer contact, please keep it properly.
Dear customer:
Thank you for choosing products of TDRFORCE. In order to provide you with more satisfactory
service and better protect your rights, please read this regulation carefully and keep the warranty
card properly.
Regulations:
1.For any quality issue of TDRFORCE product within 180 days after sale, we offer no-hassel
return service for our customers;
2.Please contact our Amazon online customer service or [e-mail] before return;
3.Valid evidence of purchase will be essential such as order ID or warranty card;
4.Valid evidence showing product problems shall be provided in the contact such as videos, photos
or detailed descriptions.
5.Warranty card shall be filled out and attached with the return product.
Please notice:
The following situations are not applicable to our no-hassel return policy.
1. Product damage caused by installation or use not in accordance with the instruction manual;
2. Product beyond 180 days after sale;
3. Product return with no reason;
4. Product damage caused by self-disassembly or sabotage;
5. Product damage caused by force majeure such as earthquakes, fires, etc.
Buyer’s Name:
Tele:
E-mail:
Order ID:
Return Address:
Product Problem Description:
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com
www.tdrpump.com