TeachLogic Maxim III User manual

owner’s manual
Infrared Wireless Microphone System

owner’s manual
Maxim III

notes
Date of Purchase:
Model Number:
Serial Number:
Notes:

contact
thank you
If you should encounter
some unresolved issue,
please contact TeachLogic
customer service depart-
ment for further assistance.
4
owner’s manual
Congratulations on the purchase of your new Maxim
III Infrared Wireless Microphone Sound System. You
can be assured that the Maxim III fulfills all
specifications and was produced to very high
quality control standards. TeachLogic incorporates
the latest state of the art technology, employs the
most advanced manufacturing methodology and
uses only premium quality components to assure
many years of reliable performance. We appreciate
your confidence by your selection of our product. It
is TeachLogic’s intent to uphold that confidence by
providing factory assistance and dealer support.
We hope you will take the time to view this manual
to familiarize yourself with the product operation
and features. This manual will help you learn to use
and gain the maximum benefit of the Maxim III
system. The manual provides a basic explanation on
the principles and advantages of infrared
transmission. Followed by the system description,
operation and installation instructions, the manual
will conclude with maintenance and troubleshooting
procedures.
Brian Van Waay
President
1•800•588•0018
[e-mail]
1•760•631•1283
www.teachlogic.com
Maxim III

safety instructions
Read Instructions
All safety and operation instructions should be read
before operating this TeachLogic product.
Retain Instructions
Safety and operating instructions should be kept
for future reference.
Water & Moisture
This product should not be operated near water.
Heat Environment
Do not subject this product to excessive heat
conditions.
Power Source
This product must be connected to an AC power
source per the voltage input specified and marked
on the power supply.
Power Cord Caution
Power cable should be routed clear of foot traffic
and supported clear of kinking or abrasion.
Object Protection
Locate the operating unit so it will not be subjected
to falling objects or water entry.
Internal Service
User should not attempt to service this product.
All internal service must be accomplished by a
qualified technician.
Electric Shock
Do not adapt or modify the AC power plug thus
lifting the earth ground connection.
certifications
Listed
US CA
TeachLogic systems are
manufactured using lead-
free processes and are free
of materials harmful to the
environment. They conform
to the most stringent new
European guidelines for
consumer products (RoHS).
Recycle—Do not dispose
rechargeable batteries in
trash. Actually it is unlawful
to do so in CA, NY & ME.
Contact: Earth911.com
1-800-CLEANUP
Save our resources and
don’t contaminate.
Go Green
caution

transmitter
table of contents
About Infrared .....................................................
Product Description ............................................
Maxim III System Description IMA-520 ............
Sapphire Microphone/Trasmitter IRT-60 .........
Handheld Microphone/Transmitter IRH-35 .....
Drop-in Charger BRC-55/Ceiling Sensor ICS-55
Installation of Ceiling Sensor .............................
Installation of Ceiling Speakers .........................
Installation of Wall Mount Speakers .................
System Wiring ...................................................
Page Pass Through .............................................
Fire Alarm ............................................................
RS-232 Features .................................................
Security Alert Features ......................................
Operation of Wirless Microphone.....................
Trouble Shooting ................................................
System Specifications .....................................
Five Year Limited Warranty ..................................
1
2
3
4
5
6
7
8
9
10-11
12
13
14
15
16
17
18-19
20
6
owner’s manual
Maxim III

a brief word about infrared
Infrared is a light ray that is below the visible
spectrum, just like the soun extends beyond your
hearing ability. An example of infrared transmission
is the remote control for your TV set. When a button
is pressed, a beam of infrared light is emitted by
a Light Emitting Diode (LED) from the remote
control. It is detected by a receiving diode in your
TV set. When you press a certain command on your
control, the internal electronics cause the infrared
light to flicker in a programmed sequential pattern
(called modulating the light beam). The modulated
infrared beam is detected by the receiving diode
and is electronically decoded. The decoded signal
activates the circuitry to perform the command
function on your TV set.
Sohowdoesthis applytothe infraredcommunication
system you are about to start using? The
microphone/transmitter has several Light Emitting
Diodes (LED) that emit infrared light beams to the
sensor located in the corner of the room. Now
when you talk into the microphone, the microphone
element modulates the light beam, causing it to
flicker in sync with your speech. The sensor detects
the sequential signal and the electronic circuitry in
the Maxim III converts that sequential signal into a
line level analog audio signal. Now that audio signal
can be fed into an amplifier. The amplifier magnifies
the electronic signal and sends it to the speakers.
This causes the speaker cone to move in sync with
your voice. The speaker replicates your voice and
disperses your voice evenly throughout the room.
1
IR transmission
The IR transmitter
transmits directly to the
sensor. However; due to
the strength of the IR
transmitter, the infrared
signal will bounce off the
walls, ceiling and floor for
reception thus providing
continuous connectivity
throughout the room.
Benefit: total freedom
of movement within the
room with no restriction
of orientation.
Infrared will not
penetrate a solid surface
thus preventing any
transmission from
going out of the room.
“What’s said in
the room, stays in
the room”.

2
owner’s manual
2
Maxim III
product description
The Maxim III is an infrared wireless microphone
system that can be added to any sound system.
It can be a supplement to an existing multi-media
system to expand it's utilization to provide voice
reinforcement.
The addition of a Maxim III system to your multi-
media system will transform your classroom
sound system into a totally hands free voice
re-enforcement system, resulting in reduced voice
fatigue, enhanced student listening and improved
student learning. The wireless function permits
360° connectivity throughout the classroom
regardless of body position or orientation.
The system is comprised of an infrared detecting
sensor(s) installed in the ceiling. The sensor
collects the IR wireless signal from the microphone/
transmitter and sends a composite signal to the
receiver. The receiver transforms the composite
signal into an analog audio signal which is fed to
the multi-media amplifier. The amplifier powers the
speakers for even voice reinforcement throughout
the room.
The microphone / transmitter can be the Sapphire
or Handheld. The rechargeable batteries will
provide 6 – 8 hours of service per charge. The drop-
in charger will recharge the batteries overnight,
ready for another day’s use.
Reliable
performance.
Use with
confidence.

3
front of IMA-520 receiver/amplifier
back of IMA-520 receiver/amplifier
Power on/off
CH A Microphone Volume Control
CH B Microphone Volume Control
DVD Volume Control
Computer Volume Control
Speaker Output - Two Channel
Four pin Phoenix connector
Fire Alarm - AC/DC 5-24 volt
Page Pass Through 2 pin Phoenix
Sensitivity control
Impedence selector
Five band digital equalizer ±12 dB
Two Sensor Inputs (RCA)
5 Volt USB for BRC-55 charger
Power Input: 19 VDC 3.4A
Aux Volume Control
MP3 Volume Control
MP3 Input (3.5mm)
Lesson Capture Volume Control
Lesson Capture Output (3.5mm)
ALS gain control
ALS Input 3-5mm
RS-232 Tx,Gnd,Rx -3 pin
Security Alert - Com,N/O,N/C -3pin
Aux-Mic Input Selector
Aux-Mic Input 3.5mm
Computer Input 3.5mm
Computer Anti hum ON/OFF
DVD dual Mono Inputs (RCA)
1
2
3
4
5
6
7
8
9
10
10
1 1
12
13
14
15
16
17
18
1
2
3
4
5
6
7
8
9
7
6
5
4
3
2
1
Maxim III system
The Maxim III system is comprised of a microphone / transmitter, either the
Sapphire (IRT-60), or Handheld (IRH-35) for voice transmission to a ceiling
sensor (ICS-55) that sends the signal to the receiver / amplifier (IMA-520).
The receiver/amplifier processes the signal and produces an analog signal of
your voice for output to the sound field speaker system.
CH A CH B
AUX
LESSON
CAPTURE
OUTPUT
INPUT
DVD COMPUTER MP3
Maxim III
8910
INPUTS
COMPUTER DVD SENSOR
POWER
19V DC
3.4A MAX
EQUALIZER
SPEAKER OUTPUT
B +
_
123
+_
RS232 SECURITY ALERT
FIRE ALARM
AC/DC 5-24V
1KHZ
300
100
MIC
1 Tx
2 Gnd
3 Rx
COM N/O N/C
COMP/ANTI-HUM
4ohm load = 25watts/amp
10KHZ
3KHZ
ON OFF
AUX
SENSITIVITY
ALS
PAGE INPUT OUTPUT
100V
70V
25V
5 VOLT
OUTPUT
A
+_
+_
7
6
5
4
3
2
1
8
10
INPUTS
COMPUTER DVD SENSOR
POWER
19V DC
3.4A MAX
EQUALIZER
SPEAKER OUTPUT
B +
_
123
+_
RS232 SECURITY ALERT
FIRE ALARM
AC/DC 5-24V
1KHZ
300
100
MIC
1 Tx
2 Gnd
3 Rx
COM N/O N/C
COMP/ANTI-HUM
4ohm load = 25watts/amp
10KHZ
3KHZ
ON OFF
AUX
SENSITIVITY
ALS
PAGE INPUT OUTPUT
100V
70V
25V
5 VOLT
OUTPUT
A
+_
+_
9
11 12 13 14 15 16 17 18

2
owner’s manual
4
Maxim III
infrared microphone/transmitters
The infrared microphone/transmitter is comprised of a microphone input, signal processing
circuits and several emitting diodes that transmit the vocal signal to the sensor.
The microphone/transmitter can be the Sapphire or Handheld. The rechargeable batteries will
provide 6–8 hours of service per charge. Place the microphone/transmitter in the charger for
overnight charge and it will be ready for another day’s use.
The drop-in battery chargers are specifically designed to recharge lithium & NiMH batteries
at an optimum rate for maximum operating capacity and extended service life. Charger will
automatically start charging the batteries upon insertion and will shift to a maintenance
charge when batteries are fully charged.
The Sapphire’s vocal clarity is unsurpassed. Its
high level output is achieved by the unidirectional
(Cardioid) microphone and a unique free air
suspension system. With a built-in breath filter, the
Sapphire can function as a pass around hand mic.
The strategic alignment of the emitting diodes
assures reliable connectivity throughout the room
without static or drop out.
With a tap on the power button, the microphone
is muted for private conversation—tap again to
restore to normal operation. The auxiliary input
allows wireless playback of your iPod™ through the
Sapphire. A three position slide switch provides
selection of low, medium, or high microphone
sensitivity.
features
•Elegant design
•Only 1.4 oz. including battery
•Long life “Lithium ion” bat-
tery
•Rechargeable via USB cable
to computer
•Battery level indicator – Back
light under power switch
•Momentary mute button,
backlight blinks in mute
mode
•Push “on/off” power
•Channel “A” or “B” selectable
•Three level microphone
volume switch
•(HI, MID -3dB, LOW -6dB)
HI is normal
•Auxiliary input (3.5mm)
•Wear with a lanyard or slide
directly on neckline collar
(IRT-60) sapphire transmitter

5
IRH-35 handheld transmitter
The Handheld Microphone Transmitter (IRH-
35) is most applicable for student use or direct
presentation. It has an “on/off” switch and a
battery level indicator LED; Green=useable charge,
Red=low battery. The transmitter has 10 emitting
diodes: 8 around the bottom of the handle, and 2
toward the top of the handle. The metal housing
provides low handling noise and insures durable
longevity.
features
•Condenser microphone
element
•Power “on/off” switch
•Battery level indicator—
LED
•Channel “A” or “B” select-
able
•10 high-power emitting
diodes
•Diodes at top and bottom
of handle for increased
Coverage (2 Top aimed
out, 6 Bottom 360°,
2 Bottom aimed down)
•360º IR radiation for as-
sured connectivity
•Two “AA”, Duracell, re-
chargeable NiMH batteries
IRT-60 remote control features
1. Moving the priority switch Up/Down will control
the volume of the line inputs.
2. A momentary tap of the priority switch will
duck down the line inputs 15dB. The receiver front
panel power switch changes to a blinking PURPLE.
A second tap will restore line input back to normal.
3. Hold in priority switch for 4 seconds closes
the contact closure on the Security Alert output.
The receivers front panel power switch changes
to binking GREEN. Holding the button down for
another 4 sec. returns the contact to normal.

owner’s manual
6
Maxim III
BRC-55 drop-in battery charger
This stylish desktop drop-in charging station makes
it convenient and easy to recharge both Sapphire
Pendant and Handheld Microphones. Charge one
IRH-35 handheld transmitter and up to two IRT-60
Sapphire transmitters simultaneously. Charging
indicator lights illuminate Red when charging, and
Green when fully charged. The “TL” logo illuminates
Blue when plugged in.
ICS-55 ceiling sensor
sensor cable
The ceiling sensor is the preferred infrared sensor
for optimum performance. This is the unit that
needs to be installed on the ceiling. It comes with
a mounting/support bracket and 50 feet of plenum
rated cable with RCA connector on each end. The
ideal location for the dome sensor would be in the
center of the ceiling. This will provide a clear signal
path for the IR transmission from the transmitter to
the dome sensor without obstruction. In addition,
you will have 360° coverage and will minimize
the transmission distance for more reliable
performance. It collects the infrared transmission
signal via 6 large detecting diodes.
A Cable connects the sensor to the receiver. The
cable is dual-shielded with a male RCA connector
on each end and is plenum rated.
Green light indicates that
the sensor is receiving
power from the receiver.
power “on” LED

7
installation of ICS-55 ceiling sensor
The ideal location for the ceiling sensor is in the center of the ceiling. This will provide a
clear signal path for the IR transmission from the transmitter to the dome sensor without
obstruction. In addition, you will have 360º coverage and will minimize the transmission
distance for more reliable performance.
ICS-55
ICS-55

owner’s manual
4
Maxim III
8
Ceiling Sensor
Listening Area
Front of Room
Ceiling Speakers
Listening Area
Front of Room
Ceiling Speakers
Ceiling Sensor
Optional:
Two Additional Speakers
installation of speakers
installing two SP-628 ceiling speakers
•Determine the listening area.
•Divide listening area into two quadrants
•Locate and identify the center most tile in each
quadrant
•Lay ceiling tile face down on clean flat surface
•Lay tile bridge on ceiling tile and center it
•Trace and cut the large hole using a keyhole or
drywall saw
•Strip the speaker cable ends, approx. ½"
•Route speaker wire from speaker opening to
amplifier
•Reinstall ceiling tile with tile bridge in place above
the hole
•Pull speaker cable back down through speaker
hole
•With a pointed tool or paper clip, lift up and
remove speaker grille
•Set speaker on top of ladder and connect speaker
cable connect
•Observe speaker polarity, connect Red wire to (+)
terminal and black wire to the (C) terminal
•With the mounting clamps folded back, position
speaker into speaker hole
•With a #2 Phillips screwdriver, tighten the quick
clamps
•Reinstall speaker grille and remove any soil or
fingerprints
•Repeat same for other speaker
Two wall mount or ceiling speakers can be powered by the receiver/amplifier. It has two amplifiers
(25 watts ea.). One speaker will be connected to each amplifier.
Optional: Two additional speakers can be powered by the amplifier. Connect two speakers in
parallel. Then bring a cable from each pair to the amplifier. Connect one pair to each amplifier.

79
Optional:
Two Additional Speakers
installing SP-2000 wall mount speakers
•First observe the shape of the room: ceiling height,
door locations, windows, mounting surface, and
seating area
•Ordinary installation would be to locate the
speakers on each side wall approximately even
with the front row of listeners
•Mount the speakers 6–7 feet above the floor
•Install the mounting brackets in the vertical (up/
down) orientation
•Mount brackets using the appropriate hardware
•Insert speaker with the tweeter in upper position
•Secure speaker in bracket with the hand fasteners
•Orient each speaker toward the center of that half
of the listening area
•Strip speaker cable ends ½” and connect to
speaker
•Observe speaker polarity: Connect (+) wire
(with printed writing) to (+) terminal and (-) wire
(unprinted & textured) to the (-) terminal
•Route speaker cable to the receiver/amplifier in a
safe, least visible, tidy manner
Receiver
Amplifier
Front of Room
Wall Speakers
Ceiling Sensor
Receiver
Amplifier
Front of Room
Wall Speakers
Ceiling Sensor
final connection of the system
With receiver/amplifier located, speaker and sensor
cables neatly routed, we are ready to complete the
installation.
•Cut the speaker wire to the appropriate length
•Strip about 3/8” off the end of each speaker
wire.
•Twist the wire and if you have a soldering iron,
tin the wire ends
•Unplug the phoenix connector, insert (+) wire
(with printed writing) into either outside (+)
terminal. Plug the other (-) wire into center (-).
•Tighten set screws.
•Repeat for other pair and insert plug firmly into
speaker receptacle
•Plug power supply into AC outlet

note
owner’s manual
10
Maxim III
owner’s manual
owner’s manual
Maxim III rear view
Maxim III front view
INPUTS
COMPUTER DVD SENSOR
POWER
19V DC
3.4A MAX
EQUALIZER
SPEAKER OUTPUT
+
_
123
+_
RS232 SECURITY ALERT
FIRE ALARM
AC/DC 5-24V
1KHZ
300
100
MIC
1 Tx
2 Gnd
3 Rx
COM N/O N/C
COMP/ANTI-HUM
4ohm load = 25watts/amp
10KHZ
3KHZ
ON OFF
AUX
SENSITIVITY
ALS
PAGE INPUT OUTPUT
100V
70V
25V
+_
+_
Assistive Listening
Device
Secruity Alert
Panel
RS-232 Wall Control
Panel
Classroom
Paging Speaker
From
Page System
Fire Alert
Panel
Ceiling Speakers
A
B

11
owner’s manual
owner’s manual
system wiring
Maxim III rear view
Maxim III front view
INPUTS
COMPUTER DVD SENSOR
POWER
19V DC
3.4A MAX
EQUALIZER
COMP/ANTI-HUM
ON OFF
5 VOLT
OUTPUT
Lesson Capture
Recorder
DVD Player MP3 Player
Computer
Ceiling Sensor
Drop-in Charger Infrared Transmitter
“Sapphire” IRT-60
Ceiling Speakers
CH A CH B
AUX
LESSON
CAPTURE
OUTPUT
INPUT
DVD COMPUTER MP3
Maxim III

transmitterowner’s manual
page over-ride/page pass through
12
Maxim III
The page over-ride feature allows you to connect the TeachLogic amplifier to
the school paging/intercom system for muting purposes. A simple connection
between the in-classroom paging speaker (typically 25v or 70v) and the
TeachLogic page input will mute all the inputs and pass the page to the speakers
connected to the TeachLogic amplifier
Unplug the 2 pin green Phoenix connector
Connect the speaker cable from the paging system to the 2 pin
Phoenix connector of the Page input
Reconnect the 2 pin green Phoenix connector
Determine the signal level of the paging system (25v, 70v, or 100v)
Set the slide switch to the appropriate speaker level setting
With the TeachLogic amplifier turned ON, send a page signal through
the page input
Adjust the page input SENSITIVITY control so that an incoming
page/intercom signal will override any audio (mics, dvd etc) plugged
into the TeachLogic amplifier.
In the event of a loss of AC power, the TeachLogic amplifier will continue to
pass the page on to 2 of the speaker connections as outlined on the following
diagram. Only the upper left and lower right speaker outputs will pass page
without power.

13
blank page
fire alarm input
page pass through - fire alarm contacts
The 2 pin orange Phoenix connector labelled Fire Alarm, was designed to
provide an emergency mute of the TeachLogic amplifier. When interfaced to
the fire alarm relay contact output, all audio devices (microphones, dvd, etc.)
will turn SILENT. In the event of a fire, this will help to lower the overall decibel
levels and help students and staff hear the audible fire alarm tones/instruction
within the classroom. This feature only requires a 5-24 volt AC or DC source.

transmitterowner’s manual
14
Maxim III
blank page
RS-232 codes
Baud Rate : 9600
Parity Bit : NONE
Data Bit : 8
Stop Bit : 1
TL COMMAND Functionstring HEX
POWER ON Power:ON 4c 69 6e 6b 78 3a 50 6f 77 65 72 3a 4f 4e
POWER OFF Power:OFF 4c 69 6e 6b 78 3a 50 6f 77 65 72 3a 4f 46 46
Gain DVD UP Gain:DVD:UP 4c 69 6e 6b 78 3a 47 61 69 6e 3a 41 55 58 3a 55 50
Gain DVD DOWN Gain:DVD:DOWN 4c 69 6e 6b 78 3a 47 61 69 6e 3a 41 55 58 3a 44 4f 57 4e
Gain DVD MUTE Gain:DVD:MUTE 4c 69 6e 6b 78 3a 47 61 69 6e 3a 41 55 58 3a 4d 55 54 45
Gain Computer UP Gain:Computer:UP 4c 69 6e 6b 78 3a 47 61 69 6e 3a 44 56 44 3a 55 50
Gain Computer DOWN Gain:Computer:DOWN 4c 69 6e 6b 78 3a 47 61 69 6e 3a 44 56 44 3a 44 4f 57 4e
Gain Computer MUTE Gain:Computer:MUTE 4c 69 6e 6b 78 3a 47 61 69 6e 3a 44 56 44 3a 4d 55 54 45
blank page
RS-232 features
The RS-232 feature allows the user to
remotely operate the line level media
inputs via a convenient wall panel
controller.
Audio levels very often need to
be adjusted when switching from
computer audio to DVD players and
other audio sources. Such operations
as level UP, DOWN and MUTE are
easily accomplished via a typical eight
button controller, as shown here. This
allows the receiver/amplifier to be
placed in an area or compartment
that is not easily accesssed by the
user. Codes that are required for this
setup are also available below or from
TeachLogic's website.