
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you keep
the good numbering when you turn the pages of the I/B.
Don’t change the page numbering. Keep the language
integrity.
12 TKG JK 1040 - 171227
Assembly page 12/25
FIELD OF APPLICATION/OF OPERATION
Use the appliance for domestic purposes only and in the way indicated in these
instructions.
This appliance is intended to be used for domestic applications and similar applications
such as:
Kitchen corners reserved for personnel in shops, offices and other professional
environments.
Farms.
The use by clients of hotels, motels and other environments with a residential
character.
Environments of the “bed and breakfast” type.
BEFORE THE FIRST OPERATION
For the perfect taste, operate the jug kettle with fresh water in order to clean any residue left
from the manufacturing process. When the appliance has cooled down, repeat the process 3
times with fresh water, before rinsing.
OPERATION
Always remove the jug from the power base before filling it or before any operation.
Open the lid and fill the jug with fresh water, paying attention not to fill under the minimum
mark and above the maximum mark on the water level indicator.
Close the lid by pressing it down until you hear a click. Make sure it closes correctly.
Put the jug onto the power base, plug into the wall socket and a beep will sound. If it does
not come on, check if the kettle is correctly positioned on the base and check if the base is
plugged in.
After pressing the ON/OFF button, "100" will appear. You can choose the temperature that
you need by pressing the “+” or ”-“ button, in 5° steps from 40 to 95°C. If no need the water
begins to heat up. DO NOT open the lid while the water is boiling. During the water boiling
process you can choose the temperature with the decrease or increase button. The
temperature adjusting scope is from 40 to 95°C. When the water reaches the desired
temperature, the LED display indicates the current temperature. The LED display indicates
the actual temperature according to changes during the boiling process.
The jug kettle will switch off automatically when the water is boiling. However, you can stop
the appliance any time by putting the switch in the off-position.
For instant reboiling, wait until the water has cooled down and switch on the appliance
again.
If you want to switch on the “KEEP WARM FUNCTION” you can choose a temperature
between 40°C and 95°C in 5° steps by pressing the “+” or ”-“ button firstly. The display
appears "b40” which means you enter the "keep warm mode" already, the kettle starts to
boil and the actual temperature flashes until the water is boiled (100°C), and then the
power goes off.
Option 2: press the ON/OFF switch and keep it pressed for 3 seconds until the display
appears "b40", the display flash and you can choose a temperature between 40°C and
95°C in 5° steps by pressing the “+” or ”-“ button. The kettle starts to boil until the water is
boiled (100°C), and then the power goes off.
The display keeps showing the actual water temperature during the process. After the water
has reached 100°C, the device switch off. When the water temperature drops under the
set temperature, the appliance will turn on and begin to work. When the temperature is up
to the set temperature, the appliance will turn off automatically. The program keeps