Teamson Home Peaktop User manual

V-1
PEAKTOP
PT-OD0004
PT-OD0005
Artificial Plant with Solar
Lighting
www.teamson.com
TIME SAVER!
3D Interactive Instruction

01
** Got questions? Please have your product code (on the first page of this instruction,
e.g. PT-OD0004/PT-OD0005）and the order number ready, give us a call or email us
through our customer care support! We are always ready to assist you!

02
Thank you for choosing Teamson Home
Warranty sign up
www.teamsonhome.com
Serving you well gives us great joy!
Z8
ASIA
[phone]
USA
[email protected]
Mon - Fri 10:00am ~ 2:00pm EST
[phone]
[email protected]
Mon - Thu 9:00am ~ 5:00pm GMT
Friday 9:00am ~ 4:00pm GMT
EU
[phone].分机号108
[email protected]
Mon - Sat 9:00am ~ 5:00pm GMT+8
[email protected]
[phone]
Mon - Fri 9:00am ~ 5:00pm GMT+8
深圳办公室:
台北辦公室:

Questions?
Scan Here
03
Solar lights work by using electricity generated by the solar panel to
charge internal batteries. These batteries are then used to power the
light . When switched on which is on the back of solar panel the lights
automatically illuminate at night by using a light sensor. The duration
of illumination will depend on the amount of sunlight and therefore
change received by the solar panel.
POSITION
Position the solar panel to receive
the maximum amount of sunlight.
Do not position under bright light as this
will prevent the light switching on at night .
FIRST USE
50% 8h
Whilst there may be some initial charge in the battery. We recommend fully
charging it before first use. Leave the switch in the "ON" position for 2 sunny days
to ensure the battery is fully charged. Once fully charged switch to "ON" and your
lights will come on automatically.
NOTE: The diagrams shown are for illustrative purposes only and are not to scale.
INSTRUCTIONS:
1. Turn solar unit on by pressing the power button located on the switch panel.
2. Place the product in direct sunlight.
3. For better performance, make sure solar panel have been fully charged in
direct sunlight for approximately 8-10 hours.
INSTRUCTION FOR SOLAR PANEL

Questions?
Scan Here
04
PRODUCT PARTS
A B C
Step1 Step2
B
C
A

CHANGE BATTERY
AAA NI -MH 600mAh
1.2 V rechargeable battery
Questions?
Scan Here
05
OFF
Step:1
2
1
Step:2
Step:3
x4
Step:5
ON
Step:6
2
1
Step:4
x4

Questions?
Scan Here
06
LIGHT EFFECT INSTRUCTION
There are flash and normal light effect model.
Press the model to change one model to another.