FLOS Philippe Starck BON JOUR UNPLUGGED User manual

REV. 1
DATE 24/08/2021
1
BON JOUR UNPLUGGED
Designed by Philippe Starck, 2015
F1037057
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.

EN
2
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
01. RF25460
–Top cover chrome assembly
05. RF1037200
–Base assembly with NEW battery kit
06. RF1035109
–Power charger with electrical cable & plugs
BON JOUR UNPLUGGED
F1037057
REV. 1
DATE 24/08/2021

EN
3
RF25460
TOP COVER CHROME ASSEMBLY
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
BON JOUR UNPLUGGED
F1037057
REV. 1
DATE 24/08/2021
Bon Jour
Versailles
Small
p.03
Bon Jour
Unplugged
p.03

4
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Support the lampshade (A) (Optional, not included) on the device body's
profile (B); mount the TOP COVER (C) on the device body making sure you
accurately position the three magnet disks (D) in their housings in the body
(E) so that the TOP COVER (C) on completion of the assembly uniformly
adheres to the body's profile.
EN
Fig.1
REV. 1
DATE 24/08/2021
RF25460
TOP COVER CHROME ASSEMBLY
BON JOUR UNPLUGGED
F1037057
E
A
C
B
D
C

EN
5
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF1037200
BASE ASSEMBLY WITH NEW BATTERY KIT
REV. 1
DATE 24/08/2021
BON JOUR UNPLUGGED
F1037057

6
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Remove the base assembly with battery kit:
It’s necessary to remove the rubber pad (A)
from underneath the lamp base.
Unfasten the three fixing screws (B).
Fig.1
Fig.2
A
B
RF1037200
BASE ASSEMBLY WITH NEW BATTERY KIT
REV. 1
DATE 24/08/2021
BON JOUR UNPLUGGED
F1037057

7
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Remove the damaged base assembly with
battery kit (C) from the lamp body (D).
Disconnect the connector (E) using a small
clamp from the battery kit.
Assemble now the new spare-part:
Connect the connector (E) to the battery kit
(C).
Fig.3
Fig.4
C
E
D
C
RF1037200
BASE ASSEMBLY WITH NEW BATTERY KIT
REV. 1
DATE 24/08/2021
BON JOUR UNPLUGGED
F1037057

8
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Assemble the base the new battery kit (C) to
the lamp body (D).
Remarks!!!
ensure that the USB port is in
correspondence with the opening slot of the
lamp body.
Fasten the three fixing screws (B).
Fig.5
Fig.6
C
D
B
RF1037200
BASE ASSEMBLY WITH NEW BATTERY KIT
REV. 1
DATE 24/08/2021
BON JOUR UNPLUGGED
F1037057

9
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Apply the new rubber pad (A) underneath the
lamp base.
Fig.7
Fig.8
A
A
RF1037200
BASE ASSEMBLY WITH NEW BATTERY KIT
REV. 1
DATE 24/08/2021
BON JOUR UNPLUGGED
F1037057

EN
10
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF1035109
POWER CHARGER WITH ELECTRICAL CABLE & PLUGS
REV. 1
DATE 24/08/2021
BON JOUR UNPLUGGED
F1037057
Bon Jour
Unplugged
p.10
Bellhop
Battery
p.03
Last Order
Clear
p.09
Last Order
Fluted
p.09

11
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.1
RECHARGING THE BATTERY.
Insert the plug (G) in the power adaptor (H) in the
preferred working position (the plug can be inserted in any side of the power adaptor
block) until you hear the snap-in click (use the correct type of plug for the country the
lamp is installed in); to remove the plug press the power adaptor's push button (I). Insert
the USB plug (L) of the cable provided in its housing (M) on the power adaptor then
insert the micro-USB plug (O) into the lamp's connector (P). The complete recharging
time is 3 hours. With the lamp turned on to 100% of the light intensity, the operating
autonomy without cable is 6 hours; after 6 hours the
light intensity automatically reduces by 20% and the lamp signals the need for recharge
with three flashes which will be repeated every 10 minutes until it is put on charge.
NOTE
: This product includes a self-protection system. If it remains connected to the
power source for more than the indicated charging time, the service life of the battery
will not be affected (1000 charging cycles guaranteed).
RF1035109
POWER CHARGER WITH ELECTRICAL CABLE & PLUGS
REV. 1
DATE 24/08/2021
BON JOUR UNPLUGGED
F1037057
L
M
I
G
HO
P
UNLOC
K
CLICK!