TECH iMPRESSiONS WorkEZ XL User manual

OVERVIEW:
Tech Impressions adjustable and portable laptop stand
with mouse pad “accordions” up and down, holding
laptops at a comfortable height and viewing angle. The
aluminum panel dissipates heat to help cool laptops.
- Each stand has 2 legs.
- Each leg has 3 segments.
- Each segment is connected with a push-button joint.
• Joints lock in ~15˚ increments (marked with the numbers 0-23).
• Each joint button has an arrow that points to the locked setting.
Insert mouse pad vertically
into the hole on the side of
the panel.
Roll mouse pad to outside
of the panel
Adjust screw so mouse pad is
level.
Depress the button
to adjust the leg.
An extended button
means the joint is locked.
HOW TO OPERATE A LEG SEGMENT:
• To adjust a leg: press the button, rotate the leg to the
desired setting, release the button.
• Once the button is depressed, joints rotate in a complete
circle or 360°.
• The joint is locked when the button is extended. Only use
laptop stand when all joints are locked.
GUIDELINES:
• Max Load < 13 lbs
• Before use, ensure that:
1. All joints are locked (extended).
2. The platform is level.
3. Both legs are adjusted identically
and evenly.
4. Laptop stand is stable.
5. The platform weight is centered
over the bottom leg.
• Do not place any devices on the
panel until you affirm the above 5
steps and have pressed down firmly
on the panel to ensure Laptop
stand is stable.
ADJUSTMENT TIPS & TRICKS:
USING THE MOUSE PAD:
b
b
c
a
c
a
Unfold
Folded
Fold
WARNING!
PINCH POINT.
Keep hands and fingers
clear when adjusting.
Step 1 - unfold A Step 2 - unfold B Step 3 - unfold C
Step 3 - fold A Step 2 - fold B Step 1 - fold C
Disclaimer:
Buyer accepts full liability for any injury or loss to themselves, their property, and anyone else at any time and from any cause while using this product. Buyer
expressly releases Tech Impressions and its agents from any liability for such loss or injury. In no event shall Tech Impressions or its agents be liable for any
direct, indirect, punitive, incidental, damages or injury whatsoever arising out of or connected with the use or misuse of its products.
A
C
B
Adjustable & Portable Laptop Stand with Mouse Tray

CUSTOMIZING THE PANEL ANGLE
Push both buttons
NAIL SAVER
• TIP! Quickly Adjust Panel Tilt
Simultaneously pressing the same joint on each leg
lets you quickly adjust the platform angle.
• TIP! Need A Little More Height?
Tilting the panel ~ 15˚ elevates screens about 2.5”.
Your stand has a seemingly infinite number of configurations. Feel free to adjust the stand to any height or angle
you’d like. Be sure that all joints are locked and the stan is stable before use.
How To Use
Slide over your index finger.
What It Does
Facilitates pressing joint buttons.
Keeps finger nails off the joints.
SITTING OR STANDING AT A DESK
SITTING ON THE COUCH OR BED
PANEL HEIGHT : 1.75”
JOINT A
JOINT B
JOINT C
0
0
0
:
:
:
PANEL HEIGHT : 3.75”
JOINT A
JOINT B
JOINT C
0
21
1
:
:
:
PANEL HEIGHT : 5.75”
JOINT A
JOINT B
JOINT C
1
22
1
:
:
:
PANEL HEIGHT : 8”
JOINT A
JOINT B
JOINT C
3
21
1
:
:
:
PANEL HEIGHT : 11.5”
JOINT A
JOINT B
JOINT C
2
19
2
:
:
:
PANEL HEIGHT : 13”
JOINT A
JOINT B
JOINT C
3
18
2
:
:
:
JOINT A
JOINT B
JOINT C
0
21
4
:
:
:
JOINT A
JOINT B
JOINT C
21
22
3
:
:
:
JOINT A
JOINT B
JOINT C
12
23
5
:
:
:
PANEL HEIGHT : 14.5”
JOINT A
JOINT B
JOINT C
3
17
4
:
:
:
PANEL HEIGHT : 16”
JOINT A
JOINT B
JOINT C
4
16
4
:
:
:
PANEL HEIGHT : 17”
JOINT A
JOINT B
JOINT C
4
15
5
:
:
:
PANEL HEIGHT : 18”
JOINT A
JOINT B
JOINT C
6
12
6
:
:
:
WARRANTY INFORMATION:
1 year limited manufacturer warranty.
Adjustable & Portable Laptop Stand with Mouse Tray