Techly I-LAMP-DSK7 User manual

EN EN EN
LED TABLE LAMP
PACKAGE CONTENTS
• Power adapter x1pc • USB cable x1pc • Manual instruction x1pc
CAUTIONS
➊Use or replace power adaptor could be only with the same specifications
and USB port.
➋While the LED light on, do not shine on eyes in short distance to prevent
eye injury.
➌ This product in strong electromagnetic interference may be turned on or
off.
➍ The lamppost can’t be bent; otherwise it would damage the lamppost.
➎ This product is indoor use only.
➏ Protect Product to stay away from raining, moisture fire, high temperature
environment, so as not to damage the product.
➐ Lamp should be often used, if it is not used for a long time, please charge
the lamp one time every 2 month.
➑ When the lamp became dim, it indicates that the lamp is almost out of
power. Please recharge the battery and stop using. Otherwise it may
damage the battery and shorten the battery life.
Dear Customer, thank you for choosing our LED desktop lamp. Please read this
instruction carefully before use to fully enjoy the advantages of this product
MAIN FEATURES & TECHNICAL PARAMETERS
• Rated voltage: DC5V
• Rated power: 5W
• Touch key to control
• Sensor touch to dimmer
• Smart Timing lights
• Lighting source: Semiconductor super bright LED lamp (LED)
• Three mode light switch: natural light, white light, yellow light
• Min Luminous flux: <150LUX (measured vertically 37cm away from the
lampshade to the table)
• Max Luminous flux: >800LUX (measured vertically 37cm away from the
lampshade to the table)
• Left&right led head’s angle can be adjusted separately (The max. rotation
angle of led head is 90 degrees)
PRODUCT ILLUSTRATION
OPERATING INSTRUCTION
➊Lamp function: Place the light on the table or platform stably, push the
lamp power switch to ON to power on, Short touch “ ” switch on/off the
lamp. When the light is on, short touch “ ” key, the light can be switched
circling: three modes, natural light, white light, yellow light; default light is
natural light.
➋Adjust lamp brightness: When the light is on, long press “ ”, to change
the brightness of light.
➌ Timer function: In any state, long press “ ”, will achieve countdown
function, Then, the light will flash two times to remind the countdown
function open on, and the time is 40 minutes; If you re-press the “ ” It
will re-clock 40 minutes, until the countdown ends, lighting will shut down
automatically.
➍ Power supply: Use USB power cable to connect the computer’s USB
output plug and desktop lamp 3.5mm DC jack to power the LED lamp, and
for charging rechargeable battery as well.
➎ Charge Status Indicator: When you connect the LED lamp with the
3.5mm USB Jack, the red light indicator on, when it is full of charge, the
red indicator is off, the green light indicator on.
QUESTIONS AND SOLUTIONS
In compliance with Eu Directive WEEE this product is market
with this symbol. It means that used electrical and electronic
products should not be mixed with general household waste.
There is a separate collections system for there products in
compliance with WEEE directive, otherwise contaminative and
hazardous substances can pollute the enviroment.
With CE sign, Techly
®
ensures that the product is conformed to
the basic European standards and directives.
FAULT PERFORMANCE SOLUTION
The product does not work Low battery and need to charge, push the
power switch to on
Touch insensitive Check the power supply interference,
Reconnect the power
Flashing lights or dark Low battery please charge
Power on/off button
Lamppost
Lamp cap
Base
Input power jack DC 5V
Charge indicator
Lamp shutdown key
Light mode key
ON/OFF key
Rotation
Rotation
Rotation
LED TABLE LAMP
I-LAMP-DSK7
LED TABLE LAMP
I-LAMP-DSK7
LED TABLE LAMP
I-LAMP-DSK7
www.techly.com - info@techly.com www.techly.com - info@techly.com www.techly.com - info@techly.com

IT IT IT
LED TABLE LAMP
Gentile Cliente, grazie per aver scelto la nostra lampada LED da scrivania. Le
consigliamo di leggere questo manuale di istruzioni prima dell’uso, per godere
appieno dei vantaggi di questo prodotto
CARATTERISTICHE PRINCIPALI E PARAMETRI TECNICI
• Tensione nominale: DC5V
• Potenza nominale: 5W
• Tasto touch per controllo e gestione della luminosità della lampada
• Luce intelligente con timer per spegnimento automatico
• Sorgente luminosa: lampada LED super luminosa a semiconduttore (LED)
• Interruttore con tre modalità: lluce naturale, luce bianca, luce gialla
• Flusso luminoso minimo: <150LUX (misurato verticalmente 37 centimetri dal
paralume verso il tavolo)
• Flusso luminoso massimo:> 800LUX (misurato verticalmente a 37 cm dal
paralume verso il tavolo)
• La testa della lampada può essere divisa in due ali che possono essere
regolate separamente (l’angolo massimo di rotazione della testa princiaple è
di 90°)
ILLUSTRAZIONE DEL PRODOTTO
In conformità alla normativa WEEE, le apparecchiature
elettriche ed elettroniche non devono essere smaltite con i
rifiuti domestici. Il presente prodotto deve essere consegnato
ai punti di raccolta preposti allo smaltimento e riciclo delle
apparecchiature elettriche ed elettroniche. Contattate
le autorità locali competenti per ottenere informazioni in merito allo
smaltimento corretto della presente apparecchiatura.
Con il marchio CE, Techly
®
garantisce che il prodotto è conforme
alle norme e direttive europee richieste.
DIFETTO RISCONTRATO SOLUZIONE
Il prodotto non funziona
La batteria potrebbe essere scarica e
necessita di essere ricaricata, utilizzare il
caricabatteria in dotazione
Il tasto touch non risponde Assicurarsi che non ci siano interferenze,
ricollegare l’alimentatore
Luce lampeggiante o scura Batteria scarica, ricaricare
ISTRUZIONI PER L’USO
➊Funzione lampada: posizionare la luce sulla scrivania o su un piano stabile,
accendere l’interruttore sul retro e poi premere il tasto “ ”, una pressione
leggera permetterà di accendere/spegnere la lampada. Con la lampada
accesa, premere sul tasto “ ”, la lampada automaticamente passerà
alla modalità luminosa successiva – tramite il tasto “M” la luce può essere
commutata in tre modalità in modo circolare: luce naturale, luce bianca, luce
gialla; la modalità luminosa predefinita è luce naturale.
➋Regolare la luminosità della lampada: Quando la luce è accesa, tenere
premuto a lungo il tasto “ ” per modificare la luminosità della luce.
➌ Funzione di timer: in qualsiasi stato, premere a lungo “ ” per attivare la
funzione di conto alla rovescia. Tenendo premuto il tasto “ ” a lungo la luce
lampeggerà due volte per avvisare che il conto alla rovescia è iniziato e la
lampada si spegnerà automaticamente entro i prossimi 40 minuti. Premendo
nuovamente il tasto “ ”, si riavvierà il conto alla rovescia di 40 minuti, con
conseguente spegnimento della lampada allo scadere del tempo.
➍ Alimentazione: utilizzare il cavo di alimentazione USB per collegare la presa
USB del computer alla presa DC da 3,5 mm sulla lampada per alimentare
quest’ultima e per la ricarica la batteria.
➎ Indicatore dello stato di carica: durante la fase di carica, l’indicatore LED è
rosso, quando la batteria è carica il LED diventa verde.
PROBLEMI DI FUNZIONAMENTO E SOLUZIONI
CONTENUTO DELLA CONFEZIONE
• Alimentatore x1pz • Cavo USB x1pz • Manuale d’ istruzioni x1pz
PRECAUZIONI D’USO
➊Alimentare la lampada solo tramite la porta USB o utilizzando l’alimentatore
in dotazione o usando un alimentatore con le stesse specifiche di quello in
dotazione.
➋Non puntare la lampada LED accesa sugli occhi delle persone per
prevenire lesioni agli occhi.
➌ Non sottoporre il prodotto a forti interferenze elettromagnetiche che
potrebbero alterarne il funzionamento.
➍ La parte della lampada che supporta i LED non può essere piegata
altrimenti si danneggerebbero i LED.
➎ Questo prodotto è solo uso interno.
➏ Proteggere il prodotto tenendolo lontano da pioggia, umidità, ambiente ad
alta temperatura, che potrebbero danneggiare il prodotto.
➐ Nel caso in cui la lampada non venga utilizzata spesso, si consiglia di
ricaricare la batteria una volta ogni 2 mesi per evitare che quest’ultima si
danneggi.
➑ Quando la luminosità della lampada si riduce, significa che la batteria è
quasi scarica. Ricaricare la batteria e smettere di usare momentaneamente
la lampada per evitare di danneggiare la batteria e ridurne la durata.
Tasto di accensione/spegnimento
Stelo lampada
Calotta lampada
Base
Presa alimentazione jack DC 5V
Indicatore carica
Timer
Tasto modalità luminosa
Interruttore
Rotazione
Rotazione
Rotazione
LAMPADA LED DA TAVOLO
I-LAMP-DSK7
LAMPADA LED DA TAVOLO
I-LAMP-DSK7
LAMPADA LED DA TAVOLO
I-LAMP-DSK7
www.techly.com - info@techly.com www.techly.com - info@techly.com www.techly.com - info@techly.com
Table of contents
Languages:
Other Techly Home Lighting manuals
Popular Home Lighting manuals by other brands

Arnsberg
Arnsberg WILHELM 529210108 Assembly instructions

Safavieh Lighting
Safavieh Lighting GARUDA FLL4122A manual

JALEXANDER
JALEXANDER JAE315 quick guide

Dale Tiffany
Dale Tiffany TR90473 Assembly instructions

pols potten
pols potten Lamp base dripp instruction manual

VIBIA
VIBIA Flamingo Aassembly Instructions