TechNexion UVC-VL-3100 User manual

Quick Install Guide
USB Type-C Frame Grabber Adaptor UVC-VL-3100
1. Product Overview
2. How to Connect the Adapter
1. Connect the adapter to the camera via the FAKRA connector.
2. Connect the adapter to a computer via the USB Type-C port.
3. The LED indicator will light up when the connection and power are ready.
1
3
2
Note: Connect to a DC power adapter (10-30V/2A) with the size t to 2.1x5.5mm plug if the computer you connected doesn’t o󰀨er enough power to
activate the adapter. Check the LED indicator status again once the extra power is connected.
Mounting Holes (Bottom Side)
Secures the adapter.
Mounting Holes (Top Side)
Secures the adapter.
Engineering Mode
Updates the rmware.
USB Locking Holes
Secures the USB connector.
USB Type-C Port
Connects to a computer's USB Type-C port.
DC Power Jack
Supports the 2.1 x 5.5mm male plug.
LED Indicator
Lights up when the power is on.
FAKRA Connector
Connects to a camera.
INNOVATORS OF TECHNOLOGY

INNOVATORS OF TECHNOLOGY
For more information contact your TechNexion sales
representative or email [email protected]
www.technexion.com
3. How to Use the Camera
1. Enable the camera software built-in by the operating system or a supported third-party camera application.
2. Follow the software instructions to operate the camera.
• If the messages appear on the screen below, check the following (demonstrated with Windows built-in app):
The camera isn't connected or detected. Please examine the
connections between the camera, adapter, and computer.
The camera requires to update the rmware. Please check this issue
with a technician or contact us for help.
4. Getting Information
Select a compatible camera
https://www.technexion.com/products/embedded-vision/vizioncam/
Software and development resources
https://www.technexion.com/support/