Technical Pro PSHAKE800LED User manual

User Manual
ABS Molded Powered Loudspeaker
MODEL: PSHAKE800
QUESTIONS / COMMENTS CALL 888-842-6277
or email [e-mail]
LED

P-1
WARNING!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER ON THIS SPEAKER. THERE ARE NO USER-
SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of "dangerous"
voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans. Users
should exhibit extra safety when this symbol appears in this instruction manual and follow all precautions as they are stated.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in this manual.
1- Read these instructions thoroughly before using this item.
2- Keep these instructions for future reference.
3- Heed all warnings.
4- Follow all instructions.
5- WARNING: To prevent fire or electric shock, do not expose this equipment to rain or moisture. Do not store or operate this
product near any liquids.
6- Clean only with a dry cloth.
7- Do not store or operate this product near any heat sources such as radiators, heat registers, stoves, or other apparatuses
(including amplifiers) that produce heat.
8- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the
other. A grounding plug has two blades and a round grounding prong. The wide blade or third prong is provided for your safety. If
the provided plug does not fit your outlet, consult an electrician for the replacement of the obsolete outlet.
9- Protect the all wires connected to this unit from being walked on or pinched, particularly plugs and the point where they exit from
the unit. When removing the cord from the power outlet, remove it by holding the plug not by pulling the cord.
10-Unplug the unit during lightning storms or when unused for long periods of time.
11-When wiring this unit and all other equipment used in connection to this unit make sure that all of your equipment is turned OFF.
12-Once installation and wiring is complete power on all your equipment with the volume and level controls turned DOWN. Once all
the equipment is ON slowly raise the volume or level controls to their proper positions.
13-When grounding this unit, be sure to do so correctly, so as not to defeat the built-in grounding in this unit.
14- Before placing, installing, rigging, or suspending any product, inspect all hardware, suspension, cabinets, transducers, brackets
and associated equipment for damage. Any missing, corroded, deformed, or non-load rated component could significantly reduce
the strength of the installation, placement or array. Any such condition severely reduces the safety of the installation and should be
immediately corrected. Use only hardware which is rated for the loading conditions of the installation and any possible short-term,
unexpected overloading. Never exceed the rating of the hardware or equipment.
15- Consult a licensed, Professional Engineer regarding physical equipment installation. Ensure that all local, state and national
regulations regarding the safety and operation of equipment are understood and adhered to.
16-Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such
as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
Introduction
Congratulations and thank you for your purchase of this Technical Pro professional powered loudspeaker. To get the most
from your speaker, it is recommended that you review all of the information provided in this instruction manual before
operating this equipment.
If you’ve spent any time at all in professional audio, you know the name Technical Pro and what it stands for —incredible
performance & sound, and the ultimate in reliability under harsh conditions. And now, Technical Pro offers the same
technology in a series of portable loudspeakers bringing more of what sets Technical Pro apart from all others.
PSHAKE800

P-2
Rear Panel of PSHAKE800:
PW2500
PSHAKE800
q
e
r
t
y
d
f
①$
h
①^
①&
i
u
w
①*
o
a
①!

P-4
Power Cord Connection
The PSHAKE800 is a powered speaker which means it has the built in amplifier that is able to power its speaker.
To connect the power cord to the PSHAKE800 simply plug female side of the power cord into the power cord input
which is on the rear of the unit. Then plug the male side of the power cord to an electric outlet.
If your outlet is not equipped to handle this type of plug, do not attempt to force the AC power cord into the outlet;
do not alter the plug so that it can fit in the outlet. The only course of action you can take is to find another outlet
which is properly equipped to handle a grounded plug or have an electrician upgrade your electrical outlet. Be sure
that the plug is well connected so that it does not disconnect in the middle of usage. If at any point in time the
supplied AC power cord is punctured or damaged replace it with a new power cord from a local electrician.
NOTE:
-ONLY PLUG IN THE AC POWER CORD WHILE THE UNIT’S POWER IS OFF AND THE VOLUME IS
TURNED DOWN.
-TURNING ON THE UNIT WITH THE VOLUME TURNED UP MAY CAUSE THE UNIT OR ANY
SPEAKERS CONNECTED TO IT TO BE DAMAGED.
-ALWAYS TURN DOWN THE VOLUME PRIOR TO TURNING THE UNIT OFF OR ON.
Audio Input Connections
RCA Inputs
Connecting a Signal Source
The PSHAKE800 has an RCA input jack on the rear of the unit which is designed to receive the signal directly from
your mixer, CD player or any of your other audio sources. To ensure that you have correctly connected your audio
source to the unit, make sure that it has a cable coming from its output and that this cable is plugged into the RCA
Input on the rear of the speaker.
Connecting USB Flash Drive & SD Card Inputs
There are input jacks for aUSB flash drive and SD card on the rear panel of PSHAKE800.Simply connect the USB
flash drive or SD card into their respective input jacks and use the input mode selector button to choose the
corresponding input. Be sure that the volume knobs on the PSHAKE800 are turned down at first and then slowly
raise the volume to prevent damage the speakers or any of your other equipment.
PSHAKE800
AUX
AUX

P-5
Connecting aCompatible Device
The PSHAKE800is Bluetooth compatible.
To connect a Bluetooth device (ie smart phone) to the PSHAKE800 follow the steps listed below.
Be sure that the volume knobs on the PSHAKE800 are turned down at first and then slowly raise the volume to
prevent damage the speakers or any of your other equipment. Press the input selector button to set the input
Bluetooth. Open the Bluetooth connections on your Bluetooth device and search for Bluetooth Devices.
Locate the speaker and pair with it.
Playing Audio from the USB / SD /Inputs
After following the steps above to connect a USB / SD / Bluetooth see the details below for tips on using these
inputs.
Volume Control:
The first volume control are the previous / next track number buttons. Press and hold the previous or next track
buttons to either decrease or increase the volume. This will only affect the volume on the USB, SD & Bluetooth
inputs.
Press and hold down the
Previous Track button to reduce the volume of the USB, SD & Bluetooth inputs
Press and hold down the Next Track button to increase the volume of the USB, SD & Bluetooth inputs
The second volume control is the Master Level knob.
Use the Master Level knob to increase or decrease the volume of the all Stereo inputs (AUX, USB, SD & Bluetooth)
When playing audio from the USB / SD / Bluetooth inputs press the play/pause, previous and next track buttons to
control the audio. When using the Bluetooth inputs you will also be able to control these features from the Bluetooth
device.
Press the
Previous Track button to move to the previous track when using the USB, SD & Bluetooth inputs
Press the
Next Track button to advance to the next track when using the USB, SD & Bluetooth inputs
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Federal Communications Commission Requirements: The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
●Consult the dealer or an experienced radio/TV technician for help.
THE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT. FCC Radiation Exposure Statement The equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF)
Exposure Guidelines in Supplement C to OET65. The equipment has very low levels of RF energy that it is deemed to comply without testing of specific absorption ratio (SAR).
The Bluetooth word mark and logos are registered trademarks owned by SIG, Inc. and any use of such marks by Technical Pro is under license. Other trademarks and trade name are those of
their respective owners.
PSHAKE800