Technika LCD17DVDID-108 User manual

PLV31170S1E4-IDT V Size: 148x210 mm
LCD17DVDID-108 17” LCD TV + DVD

2
SAFETY PRECAUTIONS
The exclamation point within a triangle
alerts you to the presence of important
operating, maintenance and servicing
instructions in this user’s manual.
The lightning flash with an arrowhead within
a triangle alerts you to uninsulated dangerous
voltage within the product’s enclosure that
could cause an electric shock.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO
NOT PLACE OBJECTS FILLED WITH LIQUIDS ON OR NEAR THIS UNIT.
CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME
OR EQUIVALENT TYPE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PERSONNEL.
The symbol for Class II
(Double lnsulation)
CAUTION
INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED.
AVOID EXPOSURE TO BEAM
WARNING: Should any problems occur, disconnect the AC cord and refer servicing to a qualified technician.
This product contains
a low power laser
device.
This symbol means that
the unit complies with
European safely and
electrical interference
directives.
CLASS 1 LASER PRODUCT
PLACEMENT INFORMATION
• Donotusethisunitinplaceswhichareextremelyhot,cold,dusty,orhumid.
• Placetheunitonaatandevensurface.
• Donotrestricttheairowofthisunitbyplacingitsomewherewithpoorairow,bycoveringitwithacloth,or
by placing it on bedding or carpeting.
• Undertheenvironmentwithradiofrequencyinterference,thepicturemaybeinuenced.
SAFETY INFORMATION
• When connecting or disconnecting the cord, grip the plug and not theAC cord itself. Pulling the cord may
damage it and create a hazard.
• Whenyouarenotgoingtousetheunitforalongperiodoftime,disconnecttheACcord.
• The mainsplugisusedasthedisconnectingdevice.Itshallremainreadily operableandshouldnot be
obstructed during intended use. To be completely disconnected from the supply mains, the mains plug of the
apparatus should be disconnected from the mains socket outlet completely.
• Theapparatusshouldnotbeexposedtodrippingorsplashingandthatnoobjectslledwithliquids,suchas
vases, should be placed on apparatus.
• Tobecompletelydisconnectthepowerinput,themainsplugofapparatusshallbedisconnectedfromthemains.
• ThemainsplugofapparatusshouldnotbeobstructedORshouldbeeasilyaccessedduringintendeduse.
• Leaveaminimumof200mmaroundtheapparatusforventilation,and200mmbesidetheDVDmechanism;
• Theventilationopeningsshouldnotbeimpededbycoveringwithitemssuchasnewspaper,table-cloths,curtainsetc.
• Nonakedamesourcessuchaslightedcandlesshouldbeplacedontheapparatus;
• Attentionshouldbedrawntotheenvironmentalaspectsofbatterydisposal;
• Theuseofapparatusinmoderateclimates.
• Undertheinuenceofelectrostaticphenomenon,theproductmaymalfunctionandrequireusertopowerreset.
CONDENSATION INFORMATION
• Whenleftinaheatedroomwhereitiswarmanddamp,waterdropletsorcondensationmayforminsidethe
unit.Whenthereiscondensationinsidetheunit,theunitmaynotfunctionnormally.Lettheunitstandfor1-2
hours before turning the power on, or gradually heat the room and let the unit dry before use.
RATING PLATE LOCATION
• Theratingplateisonthebackofproduct.
NOTES ON COPYRIGHT
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, or rent copyrighted material
without permission.
Apparatus Claims of U.S. Patent Nos. 6,836,549; 6,381,747; 7,050,698; 6,516,132 and 5,583,936 licensed for
limited viewing uses only.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or
disassembly is prohibited.
PLV31170S1E4 IB CI DTV 080131.indd 2 2/1/2008 3:16:24 PM

3
IMPORTANT SAFETY INSTRUCTIONS
MAINS PLUG
UNITS SUPPLIED WITH MOULDED MAINS PLUG
1. If the mains plug fitted to the AC cord supplied is not suitable for your
mains outlet it may be necessary to cut it off. Carefully dispose of the
severed plug. Under no circumstances must it be inserted into a mains
socket, otherwise a dangerous electric shock could result.
2. If the fuse in the fitted mains plug should fail, replace it with a BS1362
approved fuse rated at 3A Never use the plug without the fuse cover
fitted.
WIRING A MAINS PLUG
As the wires in the mains lead may not correspond with the coloured markings
identifying the terminals in your plug proceed as follows:
• Thewire which is coloured blue must be connected to the terminal which
is marked with the letter Nor coloured black.
• Thewire which is coloured brown must be connected to the terminal
which is marked with the letter L or coloured red.
• No connection is to be made to the earth terminal of the plug which is
marked with the letter Eor coloured green or green and yellow or marked
by the safety earth symbol.
The standard (BS1363) mains plug must be fitted with a 3 Amp fuse approved to BS1362. If any other plug or
connection is used a 3 Amp fuse must be fitted in the plug or adaptor or in the distribution board.
Caution: Moisture Condensation
If the equipment is moved from a cold place to a warm one, water in the air will condense on some parts and
may cause damage or malfunction if the equipment is operated.
Allow at least two hours for the equipment to acclimatise before switching it on.
This unit is designed to operate from a 230V AC ~ 50Hz mains supply.
Please note that when the STANDBY/ON switch is in the standby position this does not completely disconnect the
unit from the mains supply. If the equipment is not to be used for a day or more, disconnect it at the wall outlet.
This symbol means that the unit is double insulated. No connection to earth is necessary.
SAFE USE OF YOUR EQUIPMENT
This equipment has been designed and manufactured to meet UK safety standards but like any electrical equipment
care must be taken to obtain the best results from the equipment and assure your own safety. Here are a few tips
to help you do this:
READ this instruction manual before you attempt to use the equipment.
NEVER fit makeshift stands or legs with woodscrews. Use only approved supports and fasteners specially designed
for the equipment.
NEVERletanyone,especiallychildren,pushobjectsintoholes,ventilationslotsoranyotheropening;thiscould
result in fatal electric shock!
ALWAYS disconnect the AC power cord when you are not going to use the unit for a long period of time.
ENSURE adequate ventilation of the equipment is not obstructed, for example by curtains above or soft furnishings
underneath it.
ENSURE that all electrical connections (including the mains plug, extension leads and interconnections between
pieces of equipment) are properly made in accordance with the instructions given. Switch off the main supply
when making or changing connections.
CONSULT your dealer if you are ever in doubt about the installation, operation or safety of your equipment.
DON’T continue to operate the equipment if it is damaged in any way or if it does not function normally.
Withdraw the mains plug and consult your dealer.
DON’T leave equipment switched on when it is unattended unless it is part of it’s normal function to operate in
your absence, for example a video cassette recorder with timed recording facility.
LISTENtoheadphonesatmoderatevolumelevels;highvolumelevelscanpermanentlydamageyourhearing.
The wiresinthis mains lead are
coloured in accordance with the
following code.
BLUE-NEUTRAL
BROWN-LIVE
Brown(Live)
Cord grip
Blue
3 amp fuse
(Neutral)
PLV31170S1E4 IB CI DTV 080131.indd 3 2/1/2008 3:16:25 PM

4
TABLE OF CONTENTS
SAFETY PRECAUTIONS .......................2
IMPORTANT SAFETY INSTRUCTIONS
............................................................3
DISC FORMATS ..................................5
INSTALLATION.................................... 6
Removing the base stand ..................6
Mounting on the wall .......................6
REMOTE CONTROL ............................7
REMOTE CONTROL REFERENCE GUIDE
.......................................................8 - 9
UNIT REFERENCE GUIDE..................10
CONNECTING A TV ANTENNA.........11
COMMON INTERFACE......................11
CONNECTING A POWER CORD ...... 11
UNIT OPERATION.............................12
Turning the unit on .........................12
TURNINGTHE UNIT ON FOR THE FIRST
TIME ..................................................12
7 DAY ELECTRONIC PROGRAMME
GUIDE (EPG) FOR DTV ....................13
AUDIO LANGUAGE FOR DTV ..........13
TV SETUP................................... 14 – 17
TV setting menu..............................14
Picture menu ..................................15
Sound menu ...................................16
Time menu .....................................16
Setup menu ....................................17
Lock menu......................................17
TELETEXT .................................. 18 – 19
CONNECTIONS......................... 20 – 21
Connecting to A/V Devices.............20
Connecting to sources with SCART ..20
Connecting a PC.............................21
USING HEADPHONES ......................21
SOUND SYSTEM................................21
CD/DVD OPERATION............... 22 – 23
Playing a disc .................................22
Playing a picture file disc................22
Pausing playback (still mode) ..........22
Stopping playback .......................... 22
Skip (Forward/Reverse)....................22
Fast forward/fast reverse.................. 23
Slow-motionplay(DVD).................23
Audio selection (DVD).................... 23
Subtitle selection (DVD) .................23
Angle Selection (DVD).................... 23
SPECIAL FUNCTIONS........................24
Display (DVD) ................................24
Locating a specific chapter (DVD)...24
Locating a specific title (DVD) ........24
Locating a specific time ..................24
REPEAT PLAYBACK ............................25
Repeating a chapter / title (DVD) ...25
Repeating a single track / the entire disc
(CD)................................................25
R e p e a t i n g a s p e c i f i c s e c t i o n
(DVD) (CD) ....................................25
DVD PROGRAMMABLE PLAYBACK ..26
Programmable memory ..................26
CUSTOMIZING THE FUNCTION
SETTINGS .................................. 26 – 28
Language setup...............................26
Video setup ....................................27
System setup............................27-28
TV Display .................................. 27
Parental........................................28
Password......................................28
Default.........................................28
MAINTENANCE .................................28
LANGUAGE CODE LIST.....................29
TROUBLESHOOTING GUIDE ... 30 – 31
SPECIFICATION.................................31
PLV31170S1E4 IB CI DTV 080131.indd 4 2/1/2008 3:16:25 PM

5
DISC FORMATS
This unit can playback:
TITLE, CHAPTER AND TRACKS
• DVDsaredividedinto“titles” and “chapters”.
If the disc has more than one movie on it, each
movie would be a separate “title”. “Chapters”
are sections of titles.
• AudioCDsaredividedinto“tracks”.A “track”
is usually one song on an Audio CD.
ICONS USED ON DVDS
Sample Icons
Language selections for audio
Language selections for subtitles
Screen aspect ratio
Multiple camera angles
Region code indicator
Note:
• WhenplayingbackaCD-G(Graphics)orCDEXTRAdisc,theaudioportionwillbeplayed,but
the graphic images will not be shown.
DVDS
[8CM/12CM DISC]
AUDIO CDS
[8CM/12CM DISC]
CD-R/CD-RW
Compatible
Note:
•Numbersidentifyeachtitle,chapter,andtrackonadisc.Mostdiscshavethesenumbersrecorded
on them, but some do not.
Notes on Unauthorized Discs
You may not be able to play some DVD discs on this unit if they were purchased from outside your
geographic area or made for business purposes.
JPG-CD
picture viewer
DISC FUNCTION OR OPERATION THAT IS NOT AVAILABLE
When the symbol appears on the screen, it indicates that the function or operation attempted is
not available at that time. This occurs because the DVD disc manufacturer determines the specific
functions. Certain functions may not be available on some discs. Be sure to read the documentation
provided with the DVD.
REGION MANAGEMENT INFORMATION
Region Management Information: This unit is designed and manufactured to respond to the Region
Management Information that is encoded on DVD discs. If the Region number printed on the DVD
disc does not correspond to the Region number of this unit, this unit cannot play that disc.
The region number of this unit is .
Titul 1 Titul 2
2
Track1 Track2 Track3 Track4 Track5
Title 1
Chapter 1Chapter 2Chapter 3Chapter 2Chapter 1
Title 2
PLV31170S1E4 IB CI DTV 080131.indd 5 2/1/2008 3:16:26 PM

6
INSTALLATION
MOUNTING ON THE WALL
ThisunitisVESA-compliant,andisdesignedtobewall-mountedwithaVESA-compliant100mmx
100mmmountingkitdesignedforat-panelTVs(soldseparately).Mountthisunitaccordingtothe
directions included with the mounting kit.
Note: Remove the base stand before mounting the unit on the wall.
REMOVING THE BASE STAND
WARNING: The LCD Display is very fragile, and must be protected at all times when removing
thebasestand.Besurethatnohardorsharpobject,oranythingthatcouldscratchordamagethe
LCD display, comes into contact with it. Do NOT place pressure on the front of the unit at any time
because the screen could crack.
1. Disconnect any cables or cords connected to the unit.
2. Lay the unit down on a flat surface, so the back side is facing up, making sure to place a soft
cushioned material (such as a pillow or thick piece of foam) beneath the screen.
3. Remove the four screws and then remove the BASE STAND from the TV.
Four
mounting
holes
100mm
100mm
Size: M4 screws
PLV31170S1E4 IB CI DTV 080131.indd 6 2/1/2008 3:16:26 PM

7
REMOTE CONTROL
USING THE REMOTE CONTROL
• PointtheremotecontrolattheREMOTESENSORlocatedontheunit.
• Whenusingthisunitinaverybrightlylitarea,theinfraredREMOTECONTROLSENSORmay
not work properly.
• Therecommendedeffectivedistanceforusingtheremotecontrolisabout16feet(5metres).
TO CHANGE THE REMOTE CONTROL BATTERY
1. Open the battery door. 2. Insert two “AAA” batteries.
BATTERY REPLACEMENT
When the batteries become weak, the operating distance of the remote control will be greatly reduced
and you will need to replace the batteries.
Note:
• IftheRemoteControlisnotgoingtobeusedforalongtime,removethebatteriestoavoiddamage
caused by battery leakage corrosion.
• Donotmixoldandnewbatteries.DonotmixALKALINE,standard(CARBON-ZINC)orrechargeable
(NICKEL-CADMIUM)batteries.
WARNING:
•Donotdisposeofbatteriesinareortheymayleakand/orexplode.
•Thebatteryshallnotbeexposedtoexcessiveheatsuchassunshine,reorthelike.
• Dangerofexplosionifbatteryisincorrectlyreplaced.Replaceonlywiththesameor
equivalent type.
+
_
+
_
PLV31170S1E4 IB CI DTV 080131.indd 7 2/1/2008 3:16:26 PM

8
REMOTE CONTROL REFERENCE GUIDE
1) STANDBY/ON button
Press to turn ON the unit or put it in
STANDBY (OFF) mode.
2) TV/DTV button
Press to switch to TV/DTV mode.
3) DVD button
Press to select DVD mode.
4) Number (0 - 9) buttons
Use to change the TV/DTV channels.
5) REVEAL button
Press to reveal answers on a quiz or
game pages from Teletext.
6) VOLUME (–/+) buttons
 Presstoadjustthevolumelevel.
7) CURSOR ( , , , ) buttons
Press to highlight selections on a menu
screenandmakeadjustcertainsettings.
ENTER/OK button
Confirm selections on a menu screen.
8) HOLD button
Press to stop the automatic page
change from Teletext.
PREV button
Select previous chapters or tracks on a disc.
9) MIX button
Press to select Teletext with a TV programme.
EXIT button
Press to exit the menu and return directly to
normal viewing.
/ buttons
: Fast reverse playback.
: Fast forward playback.
10) ANGLE button
Switch the camera angle of the video
presentation when scenes with multiple
camera angles are recorded on a DVD.
SIZE button
Press to set the letters size of teletext on the
screen.
11) SUBTITLE button
Press to select one of the subtitle languages
or turn off subtitle display in DTV mode, if
subtitle languages are broadcast.
Press to display the selected Teletext page.
Press to select one of the subtitle languages
programmed on a DVD.
12) TITLE Button
Press to select the title menu of a DVD.
13) GOTO button
Skip directly to a specific location on a DVD/CD.
14) button
DirectlyselectMono/Stereo-DualI/II.
Enter Audio Language menu for DTV.
15) TEXT button
Directly select Teletext (TV) / Digital Text (DTV)
mode.
16) PC AUTO button
Set picture settings for PC mode automatically.
17) SLEEP button
Set the SLEEP timer. The unit will remain ON
for the time that is set, and will automatically
shut off afterwards.
18) MEMORY button
In play mode, enter the number of a selected
chapter or track.
19) CLEAR button
Clear input selections and cancel certain
playback functions.
20) REP A-B button
 Perform point-to-point repeat playback on a
DVD or CD.
REP DISC button
Repeat chapter of a DVD.
Repeat single track or whole CD.
LIST
19
20
18
17
16
15
14
13
11
10
9
8
7
6
4
3
2
5
1
12
PC AUTO
EXIT
TITLE
FAV
SLOW/
INDEX
AUDIO/
CANCEL
RADIO
PLV31170S1E4 IB CI DTV 080131.indd 8 2/1/2008 3:16:27 PM

9
REMOTE CONTROL REFERENCE GUIDE
21) FUNCTION button
Toggle between DTV, TV, AV2/SCART,
DVD, PC or AV1.
22) RADIO button
Press to select DTV digital radio
programmes. Press again to exit to
normal DTV programmes mode.
23) AV button
Directly selects AV1, AV2/SCART mode.
24) LAST CH button
Press to switch repeatedly between the
last two channels displayed.
25) CH/PAGE / button
Press to change the TV/DTV channels.
Press to go forward or backward the page
of Teletext screen in TV mode.
Press to go forward or backward the
page of Programme Edit & Favourite in
TV/DTV mode.
26) FAV Button
Press to display the Favourites menu in
TV/DTV mode. (You should setup your
favourite TV/DTV channels in Programme
Edit menu first, refer to page 14.)
NEXT button
Select next title, chapter or track on a disc.
27) LIST button
Press to display the channel list in TV/DTV mode.
STOP button
Stop playing a disc.
GUIDE button
Press to display the Programme Guide in DTV mode.
PLAY button
Press to start and resume playback of a disc.
INFO button
Press to display the channel information in
DTV mode.
PAUSE button
Pause playback and single frame advance.
28) SLOW button
 PresstoplayaDVDinslow-motion.
INDEX button
Press to select the page number of the index
from Teletext.
29) AUDIO button
Press to select audio sound tracks of a DVD or
change the output mode of a CD.
CANCEL button
Press to cancel the Teletext menu.
30) DVD MENU button
Press to enter the main menu of the disc you
are watching.
31) SETUP button
Enter and exit the SETUP menu of the DVD
player.
32) SOUND button
Select from preset sound mode settings (Standard,
Music, Theatre, Voice, Personal) to match the
type of show you are watching.
33) DISPLAY button
Display the current mode of the unit.
Change disc status information displayed on
the screen in DVD mode.
34) PICTURE button
Select from preset screen display settings to match
the type of show you are watching (Standard,
Movie, Dynamic, Soft or Personal).
35) LCD MODE button
Press to set the size of LCD display (16:9, 4:3,
Auto, Expand or Zoom).
36) RED/GREEN/YELLOW/BLUE button
Press to select the relevant page quickly from
the on screen menu.
37) MUTE button
Press to mute the sound.
Press again to cancel mute.
38) TV MENU button
 Presstodisplaytheon-screenTVmenu.
Press to return to previous TV menu.
LIST
PC AUTO
EXIT
TITLE
FAV
SLOW/
INDEX
AUDIO/
CANCEL
RADIO
27
28
29
30
31
36
32
33
34
35
37
38
26
25
24
21
22
23
PLV31170S1E4 IB CI DTV 080131.indd 9 2/1/2008 3:16:28 PM

10
UNIT REFERENCE GUIDE
FRONT & SIDE VIEW
1) / I button
Turns the unit on and off.
2) PLAY button
Press to start or resume playback of a disc.
3) STOP button
Press to stop playing a disc.
4) MENU button
 Presstodisplaytheon-screenTVmenu.
5) FUNCTION button
Select DTV, TV, AV2/SCART, DVD, PC or AV1.
6) CH buttons
Press to change the TV/DTV channels, forward or
backward the page ofTeletext screen and highlight
selections (Up & Down) on the menu screen.
button
Press to select previous chapters or tracks on a
disc.
button
Press to select next title, chapter or track on a disc.
7) – VOLUME + controls
 Adjustthevolumelevel.
8) Colour LCD Screen
9) Disc Door
Push gently to close the disc door.
10) PUSH OPEN button
Press to open the disc door.
11) Remote sensor
Do not block this sensor or the remote control
will not work.
Standby indicator
Indicates whether the unit is ON or in STANDBY
(OFF) mode.
Light On: The unit is in STANDBY.
Light Off: The unit is turned ON.
12) Removable stand
13) Power cord
14) DVD VIDEO OUT jack
15) Common Interface slot
16) Audio jack (PC IN)
17) MONITOR/VGA jack (PC IN)
18) SCART jack (AV IN 2)
19) VIDEO IN jack (AV IN 1)
20) AUDIO IN jacks (Left / Right) (AV IN 1)
21) PHONES jack
22) TV Antenna Cable terminal - CoaxialTV
antenna input
11
8
9
12
1
2
4
6
3
7
10
5
17 18 19 20 2216
13
21
14 15
PLV31170S1E4 IB CI DTV 080131.indd 10 2/1/2008 3:16:29 PM

11
CONNECTING A TV ANTENNA
CONNECTING A TV ANTENNA/CABLE/SATELLITE
To view television channels correctly, a signal must be received from one of the following sources:
-Anindoororoutdooraerialantenna
-RFoutputofacablesystem
-RFoutputofasatellitesystem
COMMON INTERFACE
Satellite, Cable, or TV antenna cable to TV ANTENNA Terminal
(cable not included)
Note:
Forreceivingover-the-airTVbroadcasts,werecommendthatyou
use an external fixed antenna. Should you require the use of a
temporary antenna, please ensure that you purchase an antenna
with sufficient ability to receive in weak signal areas. Only when
you are in close proximity to a transmitter will a temporary
antenna reproduce a signal as strongly as a fixed antenna.
For best picture quality from a Satellite or Cable system, connect
totheTVbytheSCARTconnectorasshownonPage20.
The unit is equipped with a CI slot. The CI slot allows you to insert a CAM (Conditional Access
Module) with an appropriate subscription card for some pay for view services.
It is required to subscribe to a pay channel company to view the pay channels of the Digital
Terrestrial broadcasting.
Fully insert the CAM (Conditional Access Module) into the CI (Common Interface) slot on the
bottom of the unit with its label side facing you.
Important notes:
• SwitchofftheTVandunplugfromtheACpowermainsbeforeinsertorremovetheCAM.
• The CAM should be correctly inserted, it is impossible to insert fully if reversed. The CAM or
the TV terminal may be damaged if the CAM is forcefully inserted.
• Some CAMs may require setting up. Refer to the module instruction manual for details of the
settings.
• ConnecttheACpowercordintoawalloutlet.
• Pressthe / I button on the unit or remote control to turn on the unit.
To AC Power Outlet
Note:
• Be sure the AC power cord is disconnected and theTV is
switched off before making connections.
• Makesurethatallthecomponentsareconnectedcorrectly.
• Whenyouarenotgoingtousetheunitforalongperiodof
time, disconnect the power cord.
• The apparatus should not be exposed to dripping or
splashing and that no objects lled with liquids, such as
vases, should be placed on apparatus.
• The mains plug is used as the disconnecting device.
It should remain readily accessible and should not be
obstructed during use. To be completely disconnected from
the supply mains, the mains plug of the apparatus should be
disconnected from the mains socket outlet completely.
CONNECTING A POWER CORD
PLV31170S1E4 IB CI DTV 080131.indd 11 2/1/2008 3:16:29 PM

12
UNIT OPERATION
TURNING THE UNIT ON
When the AC power cord is connected, press the / I button on the unit
to turn it on. Press the FUNCTION button to select the desired mode (DTV,
TV, AV2/SCART, DVD, PC or AV1). If you select DVD, the DVD logo will
appear on the screen.
Note: When the unit is not going to be used for a long time, disconnect
the AC power supply cord from AC outlet.
TURNING THE UNIT ON FOR THE FIRST TIME
• MakesuretheRFaerialhasbeenconnectedtotheTVANTENNAinputontherearoftheTV.
• Make sure the CAM (Conditional Access Module) has been inserted into the CI (Common
Interface) slot correctly, if you are using a CAM.
The first time for you turn on the unit, initial setup menu will appear. You can simply follow the on
screen prompt to set up the system.
1. Use the / button to select the screen menu language you prefer.
2. Use the button to move to Auto Tuning, press the ENTER/OK button to enter Auto Tuning menu.
3. Use the / button to select the Country you are in.
4. Use the button to move to Start. Press the ENTER/OK button confirm Start. The system will
automatically start to scan and preset all available programmes.
5. After scanning has finished, the TV will display the first programme stored.
PLV31170S1E4 IB CI DTV 080131.indd 12 2/1/2008 3:16:30 PM

13
7 DAY ELECTRONIC PROGRAMME GUIDE (EPG) FOR DTV
AUDIO LANGUAGE FOR DTV
While watching a DTV programme, you can press the GUIDE button to display the PROGRAMME
GUIDE menu, and check for programme information.
current channel
number and name
programme date
programme time
programme information
channel no.
channel name
• Usethe , , , button to select a programme, the programme time and name displays, press the
INFO button to display detailed information if available. Press the INFO button again to return.
• PresstheYELLOWbuttontohighlightprogrammedate,usethe / button to display information
for other dates.
• PresstheENTER/OKbuttontowatchtheselectedchannel.
• PresstheEXITbuttontoexitthePROGRAMMEGUIDEmenu.
Note: Guide information display may be different according to the DTV programmes.
current date
and time current programme
and time
• Usethe or button to select an audio language or audio format if available, press the or
button to select soud track between L/R (Stereo), L/L (Mono Left) and R/R (Mono Right). Press the
ENTER/OK button to confrim.
• Pressthe or EXIT button to exit the Audio Language menu.
Note: For analogue TV, press the button to selectMono/Stereo-DualI/IIdirectly.
While watching a DTV programme, you can press the button to display the Audio Language
menu, and select audio language, audio format and sound track.
audio format
audio language
sound track
PLV31170S1E4 IB CI DTV 080131.indd 13 2/1/2008 3:16:30 PM

14
TV SETUP
TV SETTING (only in TV or DTV mode)
1. Press the TV MENU button.
2. Use the or button to select TV SETTING.
3. Use the or button to select the
options (Auto Tuning, DTV Manual Tuning,
ATV Manual Tuning, Programme Edit, CI
Information), press the ENTER/OK button to
enter the settings.
4. PresstheTV MENU button to return toprevious
menu,repeatstep2toadjustothersettings.
5. To exit the setup menu and return to the normal
screen, press the EXIT button.
DELETE
Press the RED button to delete the selected channel, press the ENTER/
OK button to confirm.
RENAME (for ATV mode only)
Press the GREEN button to rename the selected channel. Use the
or button to select the characters to represent the station name,
use the or button to move the next position of character, press
the TV MENU button to confirm.
MOVE (for ATV mode only)
Press the YELLOW button and use the or button to move the
selected channel, then press the TV MENU button to confirm.
SKIP
Press the BLUE button to skip or not skip the selected channel.
FAV (Favourite)
Press the FAV button to set or cancel the selected channel as one of
the favourite programmes.
Programme Edit
All channels stored are listed in the Programme Edit menu, you can edit the channels by the following
steps:
1. Use the or button to select a channel. (Press the CH/PAGE / button to skip to previous/
next page.)
2. Press the RED / GREEN / YELLOW / BLUE button or the FAV button to edit the channel.
• AutoTuning
Automatically scan, sort and store all available programmes.
• DTVManualTuning
Perform manual search for DTV (Digital TV) programmes.
• ATVManualTuning
Perform manual search and fine tune for ATV (Analogue TV) programmes.
• CIInformation
 DisplayCAMandSmartcardinformation;selectthelanguageifavailable.
PLV31170S1E4 IB CI DTV 080131.indd 14 2/1/2008 3:16:30 PM

15
PC Setup
Use the or button to select the options (H-
offset, V-offset, Size, Phase, Auto Adjust) and
adjustthemusingthe or buttons.
- Resolution :1440x900max
- RefreshFrequency :60Hz
• H-offset
Centre the image by moving it left or right.
• V-offset
Centre the image by moving it up or down.
• Size
 Adjustthescreensize.
• Phase
 Adjustwhencharactershavelowcontrastor
when the image flickers.
• Auto Adjust
Press the ENTER/OK button to set it automatically.
TV SETUP
• Picture Mode
Select from four preset screen display settings (Standard, Movie, Dynamic and Soft), or select
Personal in which your own settings of Contrast, Brightness, Colour and Sharpness are stored.
• Contrast
 Adjustthecontrastofthepicture.Theblackportionsofthepicturebecomericherindarkness
and the white become brighter.
• Brightness
 Adjustthe brightness of the picture.
• Colour
 Adjustthecolourofthepicture.
• Sharpness
 Adjustthesharpnessleveltoimprovedetailinthepicture.
• Colour Temp
Select the colour temperature of the picture. Select Normal (balanced)/ Warm (red white)/Cold
(blue white) mode.
Note: You can also select Picture Mode simply by pressing the PICTURE button on the remote control.
PICTURE MENU
1. Press the TV MENU button.
2. Use the or button to select the PICTURE.
3. Use the or button to select the options
(Picture Mode, Contrast, Brightness, Colour,
Sharpness, ColourTemp, PC Setup),adjustthem
using the or button.
(In PC mode, select PC Setup and press the
ENTER/OK button to enter the settings.)
4. Press the TV MENU button to return to previous
menu.
5. To exit the setup menu and return to the normal
screen, press the EXIT button.
PC mode only
PLV31170S1E4 IB CI DTV 080131.indd 15 2/1/2008 3:16:30 PM

16
TV SETUP
SOUND MENU
1. Press the TV MENU button.
2. Use the or button to select the SOUND.
3. Use the or button to select the options
(Sound Mode, Treble, Bass, Balance, AVL),
adjustthemusingthe or button.
4. Press the TV MENU button to return to
previous menu.
5. To exit the setup menu and return to the
normal screen, press the EXIT button.
Experiment with different sound settings until
you find the settings you prefer.
• Sound Mode
Select from four preset sound settings (Standard, Music, Theatre and Voice),or select Personal in
which your own settings of Treble, Bass and Balance are stored.
• Treble
 Adjustthetreblerange.
• Bass
 Adjustthebassrange.
• Balance
 Adjustthebalanceleveltowardtheleftorrightspeakers.
• AVL
Select to turn Auto Volume Level On or Off.
Note: You can also select Sound Mode simply by pressing the SOUND button on the remote control.
TIME MENU
1. Press the TV MENU button.
2. Use the or button to select the TIME.
3. Use the or button to select the options
(Clock, Sleep Timer, Time Zone),adjustthem
using the or button.
4. Press the TV MENU button to return to
previous menu.
5. To exit the setup menu and return to the
normal screen, press the EXIT button.
• Clock
Press the ENTER/OK button to enter the Clock menu, use the , , , button to set Date,
Month, Year, Hour and Minute.
• Sleep timer
 SelectthetimetoturntheunittoStandbymodeautomatically:Off->5min----->90min->
120min.
• TimeZone
Select your time zone.
PLV31170S1E4 IB CI DTV 080131.indd 16 2/1/2008 3:16:31 PM

17
TV SETUP
SETUP MENU
1. Press the TV MENU button.
2. Use the or button to select the SETUP.
3. Use the or button to select the options
(Language,AudioLanguage,Subtitle Language,
Restore Setting),adjustthemusingthe or
button.
4. Press the TV MENU button to return to previous
menu.
5. To exit the setup menu and return to the normal
screen, press the EXIT button.
• Language
Select your preferred On Screen Display language.
• Audio Language
Select your preferred audio language. (Available for digital channels if multiple audio languages
are broadcasted.)
• Subtitle Language
Select your preferred subtitle language or turn off subtitle. (Available for digital channels if multiple
subtitle languages are broadcasted.)
• Restore Setting
Press the ENTER/OK button to restore the system settings to the factory default.
LOCK MENU
1. Press the TV MENU button.
2. Use the or button to select the LOCK.
3. Press the ENTER/OK or button to enter, enter
password to proceed.
(The default password is 0000.)
4. Usethe or button to select the options(Lock
System, Change Password, Block Programme,
Parental Guidance), press the ENTER/OK or
or buttontoadjust.
5. Press the TV MENU button to return to previous
menu.
6. To exit the setup menu and return to the normal
screen, press the EXIT button.
• Lock System
Select to lock or unlock the programmes.
• Change Password
If you change the password, remember your password.
• Block Programme
Enter the Block Programme menu, press the or button to select a channel, press the GREEN
button to change Lock or Unlock the channel.
• Parental Guidance
Select a censorship level to censor and block the programmes. (Off, level 4, ..., level 18)
Note: This system will only work if the correct information is transmitted by the TV channel.
If you forget the password, enter " 8888 " to unlock parental control.
PLV31170S1E4 IB CI DTV 080131.indd 17 2/1/2008 3:16:31 PM

18
TELETEXT
Teletext is an information system that displays text on your TV screen. Using the Teletext control
buttons you can view pages of information that are listed in the teletext index.
Please Note
On Screen Display is not available in text mode. The contrast, brightness and colour cannot be
changed but the volume control is still available.
Analog and Digital text look very different and operate differently.
For Analogue text press the TEXT button in ATV mode. For digital text, press the TEXT button in
DTV mode.
TO ENTER TEXT MODE
Please Note
Make sure the TV channel you are watching transmits teletext. If not “No Teletext” sign will be
shown on the screen.
In TV mode, press the TEXT button. The text page will appear, normally the index page.
TO EXIT TEXT MODE
Press the TEXT button. The TV will return to the channel you were watching.
TO SELECT A PAGE OF TEXT
Find the number of the page in the index and enter it using the Numeric buttons. The number of
the page will appear on the top left corner of the screen.
The page counter will search for your page. When it finds it, the page will be displayed.
To move to the next page of text, press the CH/PAGE button.
To move to the previous page, press the CH/PAGE button.
Toreturntotheindexpage,enterthe“100”byusingtheNumericbuttons.
MIX
To view a page of the text whilst watching a TV programme press the MIX button. The text will be
superimposed over the TV programme.
Press the MIX button again to return to the text page.
PAGE SEARCH WHILST WATCHING TV
In Text mode press the CANCEL button.
Enter the page number you want using the Numeric buttons.
The top line of the text page will appear whilst the text searches for your page. When the page is
found the number will remain in the top left hand corner of the screen.
PLV31170S1E4 IB CI DTV 080131.indd 18 2/1/2008 3:16:31 PM

19
TELETEXT
DOUBLE HEIGHT TEXT
If you have difficulty reading the text on the TV you can double the height of the text.
Press the SIZE button. The top half of the page will be displayed in double height text.
Press the SIZE button again. The bottom half of the page will be displayed in double height text.
Press the SIZE button again to return to the full page.
PAGE STOP
If the page of text you have selected contains sub pages, these sub pages will automatically be
displayed in order with a delay to allow you to read the page.
To stop the move to the next sub page, press the HOLD button. “ ” will appear on the top left
corner of the screen..
To continue moving through the sub pages, press the HOLD button again.
TO REVEAL INFORMATION
Press the REVEAL button to reveal concealed information (quiz answers etc.).
Press the REVEAL button again to conceal the information again.
FASTEXT
Atthebottomoftheteletextscreenisarowofsubjectheadingsinred,green,yellowandblue.
Theremotecontrolhasarowofcolourbuttonscorrespondingtotherowofcolouredsubjectson
the screen.
Pressingoneofthecolourbuttonswilltakeyoudirectlytothepagecorrespondingtothesubject
heading.
PLV31170S1E4 IB CI DTV 080131.indd 19 2/1/2008 3:16:31 PM

20
CONNECTIONS
CONNECTING TO DEVICES WITH A COMPOSITE (YELLOW RCA-TYPE)
VIDEO OUTPUT
To connect to A/V devices such as a VCR, camcorder or video game system.
- Connect to a VCR / Video Game System / Camcorder
Connect the AUDIO / VIDEO cable (not included) as shown.
Make sure you connect the cable from the other equipment
(AUDIO and VIDEO OUT) to this unit (AUDIO and VIDEO
IN).
To operate the connected device and play the source, first press
the FUNCTION button or AV button to select the AV1 mode.
Note:
Please refer to the user manual for the other equipment for more
information.
ToAUDIO/VIDEOINjacks(AV IN 1)
AUDIO / VIDEO CABLE (not included)
CONNECTING TO SOURCES WITH SCART
Devices with RGB video output must be
connected to the SCART input:
Connect the SCART from the source to the
corresponding SCART on this unit (SCART
cable not included).
Make sure you connect both SCART to SCART.
To operate the connected device and play the
source, first press the FUNCTION button or AV
button to select the AV2/SCART mode.
SCART CABLE (not included)
If your VCR permits, then
connect your TV antenna to your
VCR and VCR RF out to the unit.
PLV31170S1E4 IB CI DTV 080131.indd 20 2/1/2008 3:16:32 PM