TECNARE PCCbox Series User manual

IBZA-PCCbox
PCCbox Series
Self Powered Loudspeakers
Keep these important operatin instructions.
Check www.tecnare.com for updates
Operation Manual

General Information
IBZA-PCCBox Series Operation Manual
Ver.: 1.0_UK 09/2020
©EXEL ACOUSTICS SL; all right reserved
The information contained in this manual has been carefully
checked for accuracy, at the time of going to press, however
no guarantee is given with respect to the correctness.
Exel Acoustics SL accepts no responsibility for any errors or
inaccuracies that may appear in this manual or the products
and software described in it. Technical specications, dimen-
sions, weights and properties do not represent guaranteed
qualities. As manufacturers we reserve the right to make
alterations and modications within the framework of legal
provisions, as well as changes aimed at improving quality.
EXEL ACOUSTICS SL
CL Encinar, 282 – Pol. Ind. Monte Boyal
45950 Casarrubios del Monte (Toledo) Spain
Phone: [phone] Fax:
e-mail: [email protected] www.tecnare.com

4
Operation Manual
www.tecnare.com
IMPORTANT SAFE INSTRUCTIONS
Before using our product, be sure to carefully read the manual and safe Instructions. Keep this document with the device
all time.
1. Read these instructions
2. Keep these instructions.
3. Heed all warnings.
4. Follow all SAFETY INSTRUCTIONS as well DAN-
GER and OBLIGATION warnings.
5. Only use attachments / accessories specied by Exel
Acoustics SL.
6. Do not use this apparatus near water.
7. Clean only with dry cloth.
8. Do not block any ventilation openings. Install in ac-
cordance with Exel Acoustics’ instructions.
9. Do not install near any heat sources such as radi-
ators, heat registers, stoves or other apparatus (in-
cluding ampliers) that produce heat.
10. Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades
with one more wide than the other. A grounding type
plug has two blades and a third pin are provided for
your safety. If the provided plug does not t into your
outlet, consult an electrician for replacement of the
obsolete outlet.
11. Protect the power cord from being walked on or
pinched particularly at plugs, convenience recepta-
cles and the point where they exit from the appara-
tus.
12. Unplug this apparatus during lightning storms or
when unused for long periods of time.
13. Refer all servicing to qualied service personnel. Ser-
vice is required when the apparatus has been dam-
aged in any way, such as power-supply cord or plug
damaged, liquid has been spilled or objects have
fallen into the apparatus, this apparatus has been ex-
posed to rain or moisture, does not operate normally,
or has been dropped.
14. Use the mains plug to disconnect the device from
mains.
15. Do not expose this equipment to dripping or splash-
ing and ensure that no objects lled with liquids, such
as vases, are placed on the equipment.
16. The mains plug of the power supply cord shall remain
readily operable.
17. Do not connect the unit’s output to any other volt-
age source, such as battery, mains source, or power
supply, regardless of whether the unit is turned on
or o󰀨.
18. Do not remove the top (or bottom) cover. Removal of
the cover will expose hazardous voltages. There are
no user serviceable parts inside and removal may
void warranty.
19. If the equipment is used in a manner not specied by
the Exel Acoustics, the protection by the equipment
may be impaired.
CAUTION: To reduce the risk of re of electric
shock, do not expose this device to rain or mois-
ture.
CAUTION: Do not remove any covers, loosen any
xings or allow items to enter any aperture
CAUTION: The rear of the product may get hot.
Avoid direct skin contact during operation and for
at least 5 minutes after power has been isolated.
CAUTION: The product must only be positioned at
oor level when operated in a horizontal position.

5
Operation Manual
www.tecnare.com
PRECAUCIÓN:Para reducir el riesgo de incendio
por desgarga eléctrica, no exponga este aparato a
la lluvia o a la humedad.
PRECAUCIÓN: No retire la cubiert, aoje tornillos o
permita la entrada de elementos por ninguna aber-
tura
PRECAUCIÓN: La parte trasera del equipo puede
calentarse. Evite el contacto directo con la piel du-
rante su funcionamiento y durante, al menos, 5 mi-
nutos después de que se haya apagado
PRECAUCIÓN: El equipo solo debe colocarse en el
suelo cuando se opera en posición horizontal.
Antes de usar este producto, asegúrese de leer cuidadosamente el manual y las instrucciones de seguridad.
1. Lea estas instrucciones.
2. Conserve estas instrucciones.
3. Respete y siga todas las advertencias.
4. Siga todas las INSTRUCCIONES DE SEGURIDAD,
así como las advertencias de PELIGRO y OBLIGA-
CIÓN.
5. Utilice solo accesorios autorizados por Exel Acous-
tics SL.
6. No use este aparato cerca del agua.
7. Limpiar solo con un paño seco.
8. No bloquee las aberturas de ventilación e intalar de
acuerdo con las instrucciones de Exel Acoustics.
9. No instale el aparato cerca de fuentes de calor tales
como radiadores, calefactores estufas u otros apara-
tos que produzcan calor.
10. Esta unidad debe ser conectada mediante un cable
de alimentación de 3 hilos. Por razones de seguri-
dad, LA CONEXIÓN A TIERRA NO DEBE DESCO-
NECTARSE EN NINGUNA CIRCUNSTANCIA.
11. Proteja el cable de alimentación de ser pisado o
aplastado, especialmente los enchufes, receptáculos
y en el punto en el que salen del aparato.
12. Desconecte este aparato durante tormentas eléctri-
cas, terremotos o cuando no vaya a emplearse du-
rante largos periodos.
13. Confíe las reparaciones a personal cualicado. Se
requiere servicio cuando el aparato ha sido dañado
de alguna manera como por ejemplo si el cable de
alimentación o el enchufe está dañado, se ha derra-
mado líquido o han caido objetos dentro del aparato,
el aparato ha sido expuesto a lluvia o a la humedad,
no funciona con normalidad o se ha caído.
14. Desconecte completamente este aparato de la red
eléctrica desconectando el cable de alimentación.
15. No exponga este equipo a salpicaduras ni coloque
sobre él objetos que contengan líquidos, tales como
vasos o botellas. Equipo IP20.
16. El enchufe o la conexión a red debe ser facilmente
accesible.
17. No conecte la salida de la unidad a ninguna otra
fuente de voltaje, como batería o fuente de alimen-
tación independientemente de si la unidad está en-
cendida o apagada.
18. No retire la cubierta superior (o inferior). La retirada
de la cubierta lo expondrá a voltajes peligroso. No
hay piezas reparables por el usuario en el interior y
su extracción podría anular la garantía.
19. Si el equipo se utiliza de la forma no especicada por
Exel Acoustics, la protección del equipo puede verse
afectada.
IMPORTANTES INSTRUCCIONES DE SEGURIDAD

6
Operation Manual
www.tecnare.com
SYMBOL USED
AVERTISSEMENT DE SECURITE
Pour déconnecter l’appareil de l’alimentation principale de façon permanente, débranchez le connecteur du câble fourni à l’arrière
de l’appareil.
Ne retirez pas les couvercles, ne desserrez pas les xations et ne laissez aucune pièce s’introduire dans les ouvertures.
Ne placez pas d’objets contenant du liquide à proximité de l’appareil.
Ne remplacez le fusible de réseau principal que par un fusible du même type.
Le radiateur arrière de cet appareil devient chaud. Evitez tout contact direct avec la peau pendant le fonctionnement et au moins
5 minutes après la mise hors tension de l’appareil
Dangerous voltages; risk of
electrical shock
Pour indiquer les risques
resultant de tensions dange-
reuses
Warnung vor gefährlicher
elektrischer Spannung
Presencia de voltajes peli-
grosos
Important operating
instructions
Pour indequer important
Instructions
Wichtige Betriebsanweisung
oder Gebrauchsanleitung
sanleitung
Importantes instrucciones
operativas
Frame or chassis
Masse, chassis
Rahmen oder Gehäuse
Masa o chasis
Protective earth ground
Terre de protection
Masse Schutzleiter
Puesta a tierra

7
Operation Manual
www.tecnare.com
STANDARDS
FOR CUSTOMERS IN EUROPE
This product complies with both the LVD (electrical safety) 73/23/EEC and EMC (electromagnetic
compatibility) 89/336/EEC directives issues by the commission of the European community.
Compliance with these directives implies conformity with the following European standards:
EN60065 Product safety
EN55103-1 EMC emissions
EN55103-2 EMC immunity
This product is intended for the following electromagnetic environments: E1, E2; E3 & E4.
THIS PRODUCT MUST BE EARTHED. Use only a exible cable or cord with a green and yellow core which must
be connected to the protective earthing terminal of a suitable mains plug or the earthing terminal of the installation.
The cord must be a maximum of 2m long, have a 2.5mm2 CSA, a 300/500V rating and comply with EN50525-2-11
/ H05W-F.
THIS PRODUCT IS DESIGNED FOR PERMANENT INSTALLATION. It must be tted in to a 19” rack enclosure
and not operated unless so installed. The rack enclosure should be open at the front and back to allow free ventila-
tion and movement of air through the product.
FOR CUSTOMERS IN THE USA
This product has been tested for electrical safety and complies with UL60065 7th edition
THIS PRODUCT MUST BE EARTHED. Use only a exible cable or cord with a green or green / yellow core which
must be connected to the protective earthing terminal of a suitable mains plug or the earthing terminal of the installa-
tion. The cord must be a maximum of 6’ long, be 14AWG, have a rating SJ, SJT, SJE or 300/500V H05W-F and be
marked VW-1.
THIS PRODUCT IS DESIGNED FOR PERMANENT INSTALLATION. It must be tted in to a 19” rack enclosure and
not operated unless so installed. The rack enclosure should be open at the front and back to allow free ventilation
and movement of air through the product.
DECLARATION OF CONFORMITY WITH FCC RULES
We, EXEL Acoustics SL, CL Encinar 282, Pol. Ind. Monte Boya, 45950 - Casarrubios del Monte (Toledo), España,
declare under our sole responsibility that this family of devices, complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
FEDERAL COMMUNICATIONS COMMISSION NOTICE
An example of this equipment has been tested and found to comply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-
ference in a residential and commercial installation.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o󰀨 and on, the user is encouraged to try and
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit di󰀨erent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

8
Operation Manual
www.tecnare.com
FCC Caution: Any changes or modications not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
FOR CUSTOMERS IN THE CANADA
This product complies with CA /CSA C22.2 No.60065-03
Ce produit est conforme avec CA /CSA C22.2 No.60065-03
THIS PRODUCT MUST BE EARTHED. Use only a exible cable or cord with a green or green / yellow core which
must be connected to the protective earthing terminal of a suitable mains plug or the earthing terminal of the installa-
tion. The cord must be a maximum of 6’ long, be 14AWG, have a rating SJ, SJT, SJE or 300/500V H05W-F and be
marked VW-1.
CE PRODUIT DOIT ÊTRE MIS À LA TERRE. Utilisez uniquement un câble souple avec un noyau vert ou vert / jaune
qui doit être relié à la borne de terre de connecteur d’alimentation ou la borne de terre de l’installation. Le cordon
doit être un maximum de 6’ (2m) de long, 14 AWG (2.5mm2 CSA), être classé SJ, SJT, SJE ou 300/500V H05W-F
et être marquée VW-1.
THIS PRODUCT IS DESIGNED FOR PERMANENT INSTALLATION. It must be tted in to a 19” rack enclosure and
not operated unless so installed. The rack enclosure should be open at the front and back to allow free ventilation
and movement of air through the product.
CE PRODUIT EST CONÇU POUR UNE INSTALLATION PERMANENTE. Il doit être installé dans un boîtier rack
19-in. Le rack devrait être ouvert à l’avant et l’arrière pour permettre la ventilation et le mouvement d’air libre à travers
le produit .
DECLARATION OF CONFORMITY WITH CANADIAN ICES-003
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

9
Operation Manual
www.tecnare.com
EXEL ACOUSTICS SL
CL Encinar, 282. Polígono Industrial Monte Boyal. 45950 – Casarrubios del Monte (Toledo), España (Spain).
Declara que los productos IBZA-PCCbox Series y sus respectivas opciones, cumple con los objetivos de las Directi-
vas:
Declare under our sole responsibility that devices in the IBZA-PCCbox range of products comply with relating Direc-
tives:
(1) Directiva de Baja Tensión - 2014/35/UE
(2) Directiva de Compatibilidad Electromagnética - 2014/30/UE
(3) Directiva RoHS - 2011/65/UE
(4) Directiva RAEE - 2012/19/UE
(1) Low Voltage Directive 2014/35/EU
(2) EMC 2014/130/EU
(3) RoHS Directive 2011/65/EU
(4) WEEE Directive 2012/19/EU
Y es conforme a las siguientes Normas Armonizadas Europeas:
In compliance with these Harmonized European Norms:
(1) EN60065 8th. Audio, video and similar electronic apparatus. Safety requirements.
(2) EN55032:2012. EMC emissions & immunity.
(3) EN55035-2017
DECLARACIÓN DE CONFORMIDAD
DECLARATION OF CONFORMITY

10
Table of Contents
www.tecnare.com IBZA-PCCbox Series | rev.:1.0
IBZA-PCCbox Series
Table of Contents
IMPORTANT SAFE INSTRUCTIONS _________________________________________________ 4
IMPORTANTES INSTRUCCIONES DE SEGURIDAD ____________________________________ 5
SYMBOL USED__________________________________________________________________ 6
STANDARDS____________________________________________________________________ 7
DECLARACIÓN DE CONFORMIDAD ________________________________________________ 9
DECLARATION OF CONFORMITY __________________________________________________ 9
1. Welcome and unpacking _________________________________________________________ 11
1.1. Welcome to Tecnare____________________________________________________ 11
1.2. Overview the IBZA-PCCBox Series________________________________________ 12
1.3. The IBZA PCCbox Series Loudspeaker_____________________________________ 13
2. AC Power_____________________________________________________________________ 14
2.1. Power Connector Wiring ________________________________________________ 14
3. REAR PANEL FEATURES AND CONTROLS_________________________________________ 16
4. CONNECTIONS _______________________________________________________________ 17
4.1. AUDIO INPUT ________________________________________________________ 17
4.2. Before Turning On the Loudspeaker_______________________________________ 18
4.3. Limiting______________________________________________________________ 18
5. LOUDSPEAKER CONTROL______________________________________________________ 19
5.1. Power Up ____________________________________________________________ 19
5.2. Home Screen _________________________________________________________ 19
5.3. Preset_______________________________________________________________ 20
5.4. Mute ________________________________________________________________ 21
6. Care and Maintenance __________________________________________________________ 22
6.1. Care Guidelines _______________________________________________________ 22
7. Technical Specications _________________________________________________________ 22

11
Welcome
www.tecnare.comIBZA-PCCbox Series | rev.:1.0
IBZA-PCCbox Series
1. Welcome and unpacking
1.1. Welcome to Tecnare
Thank you for choosing a Tecnare®IBZA-PCCbox Series “Made In Spain” for your aplication.
Please spare a little time to study the contents of this manual, so that you obtain the best possible
performance from this unit.
All Tecnare®products are carefully engineered for world-class performance and reliability.
If you would like further information about this or any other Tecnare®product, please contact us. We
look forward to helping you in the near future.
As part of a continuous evolution of techniques and standards, Exel Acoustics SL as man-
ufacturer of Tecnare® products reserve the right to change the specications of its products and the
content of its documents without prior notice.
Updates and supplementary information are available on the Tecnare®website:
http://www.tecnare.com
Tecnare Technical Support is available at:
• (T): [phone] - [phone]
• (e-mail): [email protected]
Thank you again for placing your condence in Tecnare®products.

12
Introduction
www.tecnare.com IBZA-PCCbox Series | rev.:1.0
IBZA-PCCbox Series
1.2. Overview the IBZA-PCCBox Series
Tecnare IBIZA-PCCbox Series is the ultimate self-powered reference for rental productions, xed in-
stallations and dance clubs environments. A combination of high-end audio, sound quality, stunning aesthetics,
extreme sound pressure level and reliability. IBZA is a family of distinct format of loudspeaker systems, en-
gineered for di󰀨erent short-throw applications, including FOH systems, distributed systems, side-ll monitors,
complementary lls and, of course, dance environments, where high-output, low-distortion, and the highest
quality sound are required.
The IBZA-PCCbox Series is formed from:
• IBZA10-PCCbox, self-powered enclosure, 110º axis-symmetric, 65Hz-18KHz
• IBZA12-PCCbox, self-powered enclosure, (50ºx100º)x60º, 56Hz-18KHz
• IBZA15-PCCbox, self-powered enclosure, 80ºx50º, 48Hz-18KHz
IBZA Series constitutes a broad range of point sources, full range loudspeakers that providing high
SPL, di󰀨erent directivities patterns and a good sonic performance o󰀨-axis.
The IBZA Series is suited to various sound reinforcement applications as a main or complementary
system.
IBZA Series enclosures are easy to integrate, combining sonic character with style. Its aesthetics
appearance makes it ideal for the most demanding architectural environments.
The PCCbox Series features a Class D bi-amplied unit with a outstanding performance that incor-
porates a high quality Analogue Devices® DSP with a xed factory -presets.
Applications:
• Dance Club
• Theatre and corporate events
• House of worship
• Touring
• Live music venues
Main Characteristics:
• Built in proprietary hardware for simple, fast and safe rigging.
• Enclosures made with the latest techniques ensuring a perfect and rigid construction.
• 16mm or 18mm birch plywood. Finished in black semi-matt textured Durawood weatherized coating.
One recessed carrying handle.
• Powder coated perforated steel grid with acoustically transparent reticulated foam.

13
Introduction
www.tecnare.comIBZA-PCCbox Series | rev.:1.0
IBZA-PCCbox Series
1.3. The IBZA PCCbox Series Loudspeaker
IBZA10-PCCbox
The Tecnare IBZA10-PCCbox self-powered loudspeaker are comprised of:
• One 10-inch driver and one 1-inch HF compression driver.
• A two-channel class H amplier.
• Pole mount socket
• Switching power supply
The Ibza10-PCCbox is compact full-range loudspeakers where driver, DSP
control and amplier are integrated into a compact trapezoidal enclosure. The
700W peak power of Class-D amplier provides extended bandwidth, impro-
ved dynamic range and substantial power without endangering the drivers.
It has a highly extended bass performance for such a small volume, with a
well-balanced mid-high section.
IBZA12-PCCbox
The Tecnare IBZA12-PCCbox self-powered loudspeaker are comprised of:
• One 12-inch driver and one 1-inch HF compression driver.
• A two-channel class H amplier.
• Asymmetrical Dispersion rotatable CD horn
• Switching power supply
The IBZA12-PCCbox is compact full-range loudspeakers where driver, DSP
control and amplier are integrated into a compact trapezoidal enclosure. The
box houses multiple internal rigging points for ground-support, truss and wall
mounting, screw for an external pole mount socket. This two-way system is
designed for applications where very high output is required from a compact
enclosure. It has been designed for use as standalone full-range speaker or
together with a passive subwoofer.
IBZA15-PCCbox
The Tecnare IBZA15-PCCbox self-powered loudspeaker are comprised of:
• One 15-inch driver and one 1.4-inch HF compression driver.
• A two-channel class H amplier.
• Pole mount socket
• Switching power supply
The IBZA15-PCCbox is compact full-range loudspeakers where driver, DSP
control and amplier are integrated into a compact trapezoidal enclosure. The
box houses multiple internal rigging points for ground-support, truss and wall
mounting. This two-way system is designed for applications where very high
output is required from a compact enclosure. It has been designed for use as
standalone full-range speaker or together with a passive subwoofer.

14
AC Power
www.tecnare.com IBZA-PCCbox Series | rev.:1.0
IBZA-PCCbox Series
2. AC Power
The Tecnare IBZA-PCCbox uses a Neutrik PowerCon®TRUE1 TOP locking 3-pole AC mains con-
nector that prevents inadvertent disconnection. The power module features a cable duplex socket with input
and output. The unit must have the correct power plug for the AC power in the area in which it will be used.
To lock, twist ¼ turn clockwise after fully inserting it into the AC MAINS receptacle.
2.1. Power Connector Wiring
Use the following AC cable wiring diagram to create international or special –purpose power connectors:
If the colours referred to in the diagram don’t correspond to the terminals in your plug, use the following guide-
lines:
• Connect the blue wire to the terminal marked with an N.
• Connect the brown wire to the terminal marked with an L.
• Connect the green and yellow wire to the terminal marked with an E (or ) or coloured green (or green and yellow).
If the IBZA-PCCbox will be operated outdoors contact Exel Acoustics SL for information about the rain hood and
weather protection for the driver and electronics.
-w
-w
20
250
P S
E
JET
20
250
P S
E
JET
16
250
20
250
NAC3MX-W
Power IN
NAC3FX-W
(Connector)
NAC3MX-W
(Connector)
Power OUT
IMPORTANT: A robust AC supply is necessary for maximum performance. If the supply is too
weak the bass performance may be a󰀨ected and if it sags (drops) too much the system
may self-mute to protect itself. As soon as the appropriate AC supply is restored it will
continue to operate. Plugging multiple systems into the same outlet and long extension
cord runs may a󰀨ect the AC supply to the systems.
Before connecting a Self-Powered loudspeaker to the AC mains supply, com-
pletely turn down the input signal. If not, there could be excessive and possibly
damaging sound levels from the loudspeaker when energized
Before connecting the apparatus to the mains, make sure the
supply voltage matches the one indicated on the back of the
apparatus.

15
AC Power
www.tecnare.comIBZA-PCCbox Series | rev.:1.0
IBZA-PCCbox Series
If the colours referred to in the diagram don’t correspond to the terminals in your plug, use the following guide-
lines:
• Connect the blue wire to the terminal marked with an N.
• Connect the brown wire to the terminal marked with an L.
• Connect the green and yellow wire to the terminal marked with an E (or ) or coloured green (or green and yellow).
If the IBZA-PCCbox will be operated outdoors contact Exel Acoustics SL for information about the rain hood and
weather protection for the driver and electronics.
SAFETY ISSUES
Don’t use a ground-lifting adapter or cut the AC cable ground pin.
Keep all liquids away from IBZA-PCCBOX to avoid hazards from electrical
shock.
Don’t operate the unit with worn or frayed cables; replace them immediately.

16
Rear Panel
www.tecnare.com IBZA-PCCbox Series | rev.:1.0
IBZA-PCCbox Series
3. REAR PANEL FEATURES AND CONTROLS
1.- XLR INPUT AND OUTPUTS: The system ac-
cepts XLR input connector. The output XLR con-
nector provides a loop through for speaker daisy
chaining. The balanced connectors are connected in
active parallel, and can be used to send the audio sig-
nal to other speaker or supplementary ampliers.
2.- SYSTEM SET UP ENCODER: Rotary knob and
push-sensitive
3.- MULTIFUNCTION LED:
RED: It will stay red for 3 seconds when you turn
the unit on.
GREEN: It shifts from red to green and remains
in it for 10 seconds while the DSP prepares the
preset bank.
BLUE: It shifts from green to blue for 3 seconds
while the unit activates the audio.
4.- LCD SYSTEM SET UP DISPLAY: The LCD display
shows the dsp functionalities and allows you to navigate
for its menus using the rotary knob “System Set Up
Encoder” [2]
5.- AC POWER INPUT / OUTPUT: PowerCON®TRUE1
TOP IP-rated power connection. Send de AC power to
another Loudspeaker. Power Link: 100-120V ~ max:
1300W // 200-240V ~ max: 2800W.
Only use this equipment with an appropriate main
cord.
6.- POWER SWITCH: Main power ON / OFF switch
7.- VOLTAGE SELECTOR SWITCH: This switch is used
to set the input voltage to the power supply to either
220v/230v or 110v/115v.
MAKE SURE THAT THE AC POWER IS MATCHED
TO THE AC POWER INDICATED ON THE SELEC-
TOR [7]
AC INPUT RATING
100-240V ~, 50/60Hz
T1.6AL250V FUSE
POWER
230V
115V
This Product Must Be Grounded. Do Not Disconnect Under Load.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TENSIÓN ELÉCTRICA EN EL INTERIOR.
NO MANIPULAR
CAUTION - PRECAUCIÓN
PIN 1 GND
PIN 2 HOT +
PIN 3 COLD -
PIN 1 GND
PIN 2 HOT +
PIN 3 COLD -
ANALOGUE
INPUTS
ANALOGUE
OUTPUT
SPEAKER
CONTROL
(Push for settings)
LINK /
DSP OUT
INPUT
PCC-box Series
S/N
EXEL ACOUSTICS SL
P.I. Monte Boyal, CL Encinar 282 - Casarrubios del Monte (Toledo) SPAIN
Phone [phone] - e-mail:[email protected]
www.tecnare.com
MADE IN SPAIN
1
2
3
4
56
7

17
Connection
www.tecnare.comIBZA-PCCbox Series | rev.:1.0
IBZA-PCCbox Series
4. CONNECTIONS
4.1. AUDIO INPUT
Connect the output from your line-level signal source to the XLR - INPUT connector on the rear panel. This
is an electronically balanced input. Users must provide their own XLR cables. The XLR -type connectors on the rear
of each SW118M-PCCbox are designed for professional audio signal levels, nominally 0 dBu (= 0.775 V). Normally,
use the female XLR as the signal input.
The input panel also features a XLR-LINK connectors actively wired to the input connectors. They
allow transmitting the input signal and link it to daisy-chained loudspeaker or amplier.
The wiring convention is as follows:
The HOT, + or ‘in phase’ connection should be made to pin 2 of the XLR connector.
The COLD, - or ‘out of phase’ connection should be made to pin 3 of the XLR connector.
Pin 1 of the XLR connectors is internally connected to the chassis.
The shield of the input cable should always be connected Pin 1 of the XLR to ensure the EMC per-
formance and regulations are met.
Fig. 05: PIN out assignment SW-118M-PCCbox Analogue Input/Link - Balanced connection
4.1.1. Using unbalanced connection
Please note that the use of unbalanced connections is not recommended, however when connect-
ing the amplier to an unbalanced audio source, the signal conductor should be connected to XLR pin2. The ‘Cold’
conductor or cable screen should be connected to XLR pin 1 with a short connection made between pin 1 and pin3
as shown in Figure 06.
2 1
3
Pin 2 HOT +
Pin 1 Shield
Input XLR unbalanced connection
Fig. 06: Balanced to Unbalanced Analogue wiring and PIN out.
4.1.2. Before Connecting the Loudspeaker
On the rear panel you will nd all the controls, signal and power inputs. At rst verify the Voltage
Selector Switch on rear panel [8] (115 Volt or 230 Volt) This fast check will avoid any damage.
IMPORTANT: The Loop output connector is wired to the Input connector through a
bu󰀨er and it does not transmits the source signal when the loudspeaker is powe-
red o󰀨.

18
Connection
www.tecnare.com IBZA-PCCbox Series | rev.:1.0
IBZA-PCCbox Series
4.2. Before Turning On the Loudspeaker
You can now connect the power supply cable and the signal cable. Before turning on the speaker
make sure the volume control on the mixer output is at the minimum. It is important that the mixer is already ON be-
fore turning on the speaker. This will avoid damages to the speaker and noisy “bumps” due to turning on parts on the
audio chain. It is a good practice to always turn on the speakers at last and turning them o󰀨 immediately after their
use. You can now turn ON the speaker.
4.3. Limiting
The IBZA-PCCbox Series performs within its acoustical specications and operates at a normal
temperature if the Limit bar on the Display is on for no longer than three seconds, and o󰀨 for at least one second. If
either Limit bar remains on for longer than four seconds, that channel incurs these consequences:
• Increasing the input level will not increase the volume.
• The system distorts due to clipping and nonlinear driver operation.
• Unequal limiting between the low and high frequency drivers alters the frequency response.
Never intentionally drive a IBZA-PCCbox into continuous limiting to attain compression e󰀨ects.
For applications where large amounts of compression are required, we recommend using an out-
board compressor/ limiter for greater control of limit and compressor e󰀨ects.

19
Control
www.tecnare.comIBZA-PCCbox Series | rev.:1.0
IBZA-PCCbox Series
5. LOUDSPEAKER CONTROL
The IBZA-PCCbox system is set up using the loudspeaker control section comprising the TFT screen
and rotary encoder which incorporates a push-button for selecting properties selected on the screen using the encod-
er.
5.1. Power Up
On Power up the screen briey display the Tecnare Logo while the DSP boot up.
5.2. Home Screen
Rotating the loudspeaker System Set up Encoder will adjust whichever function is highlighted in
yellow. In the home window this defaults to the Input level. Push the encoder once to revert to select mode, the high-
lighted output level will change from the gure in dB to IN, rotate the encoder to scroll between the selections. Push
again to skip the next parameters. These parameters will act on the DSP’s input signal.
The control ranges are as follows:
• Input Level: -33dB to +6 dB
• LF SHELVING: -12 to +6 @ 250Hz, 6dB per octave
• MF EQ: -12 to +6 @ 1kHz
• HF SHELVING: -12 to +6 @ 5 kHz 6dB per octave
• HP FILTER: 20 - 200 HZ at 12 dB per octave
Tecnare DSP
IN Level: 0dB
0dB
0dB
0dB
OFF
0ms
LF SHELVING:
MF EQ:
HF SHELVING:
HP FILTER:
DELAY:
OUT A:
OUT B:
ID:TEC_81175C TECNARE DSP Version: 0.8M6 Build:00

20
Control
www.tecnare.com IBZA-PCCbox Series | rev.:1.0
IBZA-PCCbox Series
5.3. Preset
From the home and after you reach to the end of the list, press the encoder to enter on the preset
screen. There you can choose between the six available presets.
The currently loaded preset in the loudspeaker, will appear in green. As you had done previously,
rotate the system set up encoder until the loudspeaker mode you desire. It will appear in orange. Then push for ve
seconds to select and load it. The selected preset will change from orange to green. Doble-tap the encoder to go
back to the home screen.
Any changes to home screen setting may be stored in the memory of the device. These changes will
overwrite your current preset. To save these changes, from the home screen, go to the end of the setting lines and
press the encoder twice to get to the save level. As you had done previously, push for ve seconds to save the preset.
The un-stored preset will highlight orange. After saving it, will turn green.
Tecnare DSP
LOAD P01: FR
ID:TEC_81175C TECNARE DSP Version: 0.8M6 Build:00
Tecnare DSP
LOAD P01: FR
ID:TEC_81175C TECNARE DSP Version: 0.8M6 Build:00